Gloucestershire · England
Bath Resealing for Clifford's Mesne homes
Bath, shower and sink resealing with new mould-resistant silicone for householders, landlords and businesses in Clifford's Mesne. Send pictures for a free, fixed quote.
- Unsealed corners
- A messy previous reseal
- Old sealant that looks dirty
DIY repairs versus a professional job
What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.
A DIY attempt isn’t a disaster. We remove the old filler and start again, so it does not stop a professional repair. It does add a little time, so tell us about it when you send pictures.
How we handle bath resealing in Clifford's Mesne
A good reseal is all about preparation: old silicone removed, mould treated, the joint cleaned and dried. Only then does the new sealant go on, in a neat, continuous bead. Typical jobs include water getting behind the bath or tray and missing sealant behind the taps, on basins & vanity units, shower trays & enclosures and kitchen worktops & sinks.
We stand behind the work with a one-year guarantee.
- Location
- Clifford's Mesne (GL18)
- Region
- Gloucestershire
- Cover
- A year, on every repair
- Price
- Free, fixed price from pictures
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
Nearby places to Clifford's Mesne
Also in Clifford's Mesne
Common questions in Clifford's Mesne
What do you need from me?
Use the quote form or ring 0345 017 0787.
Do you charge for travel?
Travel is included in the price, and we charge the same wherever you are.
Do you work for landlords and businesses?
Yes. We work for landlords, agents, builders and businesses as well as homeowners across Gloucestershire.
Do you cover Clifford's Mesne?
Yes. We work across the UK and travel to Clifford's Mesne and the rest of Gloucestershire. Send pictures and we’ll quote, or call 0345 017 0787.
What happens if you find more damage?
It’s rare, but if it happens we talk to you first. The price only changes if you agree.
Why does mould come back so fast?
Mostly moisture and poor ventilation. We use mould-resistant silicone, and ventilation helps it last.
How quickly can you book me in?
It depends on the time of year and where you are. We’ll offer you dates when we send your quote.
Can I get a quote without a visit?
Nearly always. If photos don’t show enough, we will ask for another angle.
What we do, step by step
The work is clean and fairly quiet, so you can carry on at home. Protection goes down first, then the work takes a couple of hours. At the end we talk you through how soon it can be used and how to look after it.
- The surrounding area is protected and the joints masked.
- Old sealant and residue are removed.
- The joint is cleaned, treated and dried.
- We run a continuous bead of new silicone.
- We smooth the bead, remove the tape and leave it to cure.
Getting ready for the visit
- Make sure the room can be ventilated
- Keep a parking space free if you can
- Move bottles, mats and clutter away from the area
Ask for a price
Getting a price is easy: take a close-up of the damage and a picture from further back, send them to us with your postcode, and we’ll reply with a fixed price. There is no charge for the quote and no obligation.
Read more
Resealing in Clifford's Mesne: why it matters
Resealing costs very little, and it protects everything around the bath. Failed sealant can lead to water damage that is much more expensive. What it costs depends on how much damage there is and what kind, the material and how many jobs we combine into one visit. You get a fixed price from your pictures, so there are no surprises on the day.
Why choose Surface Doctor in Clifford's Mesne
- Same prices wherever you are
- No need to remove anything
- CHAS, Constructionline and SafeContractor accredited
- Every repair guaranteed for a year
Read our prices page.
Prices and what affects them
Prices are worked out job by job, from your pictures. What matters most is:
- Whether we combine several jobs
- How easy the damage is to reach
- What kind of damage it is
- Previous DIY repairs that have to come out
Every job is a little different, so we price each one individually. The size and type of damage, the material and access all make a difference, and combining jobs on one visit brings the cost down.
Quotes from your pictures
Two or three clear photos are usually enough. It helps if you send:
- A picture taken from further back
- Any earlier repairs or coatings
- Something in shot to show the size
- A close-up of the damage, in focus
There is no need for us to visit first. Nearly every job can be priced from photos: send a close-up, a wider shot and your postcode, and we will come back to you with a fixed figure.
Work for landlords and builders
We work for landlords, letting agents and housing providers in Clifford's Mesne as well as homeowners. Repairing between tenancies keeps void periods short, and it costs much less than replacing.
Rental properties take more wear, and replacing things at every changeover adds up. A repair between tenancies is a cheaper way to keep the property in good order.
Where we work around Clifford's Mesne
Clifford's Mesne is about 6 miles east of Ross-on-Wye, in Gloucestershire. We work in every kind of home, old or new, large or small, plus businesses and rented homes. Our repair technicians cover 470 places in Gloucestershire. Our nearest city page is Birmingham, about 45 miles away.
Jobs in GL18 work the same way as everywhere else we cover. If you’re just outside Clifford's Mesne, we cover Anthony's Cross (1 mile south-east), Aston Crews (1 mile west), Little Gorsley (2 miles north-west), Kilcot (2 miles north) and Beavan's Hill (2 miles north-west). Within a short drive, we also cover Cheltenham (15 miles east), Gloucester (9 miles south-east), Stroud (14 miles south-east), Tewkesbury (14 miles north-east), St Paul's (15 miles east) and Lansdown (15 miles east).
Around Clifford's Mesne
Typical jobs here are in homes near Saint Peter and Newent Community School and the streets around them. A little further out are Aston Ingham (1 mile west) and Newent Market House Museum (2.2 miles north-east). Green spaces nearby include May Hill and Wigpool.
Common problems we fix in Clifford's Mesne
A bathroom without good ventilation is hard on sealant: damp hangs around, and mould takes hold.
It’s worth getting a quote if you see:
- Black spots in the silicone
- Damp near the bath
- Sealant that’s split or lifting
- Discoloured, yellow sealant
Before you book anyone
- How soon you can use it again
- Whether they match the colour on site
- Whether cleaning and preparation are in the price
- If travel is included in the price
Looking after it afterwards
Simple care helps the repair last. Our advice:
- Store bottles on a shelf
- Open a window after bathing
- Give the seal a regular clean
- Wipe the joints dry after use
Leave the sealant to cure for the time we give you, typically around 24 hours.
Damp below or loose tiles need checking quickly. There may be more going on, so we will tell you if it needs a builder or plumber.
Different materials, different repairs
Baths
We fill the bath before sealing, so the joint is at its widest.
Sinks and worktops
We reseal basins, vanity tops and kitchen worktops, once the joint is completely dry.
About our accreditations · Every repair comes with a one-year guarantee.
