Northamptonshire · England
Bath Resealing for Cold Higham homes
Bath, shower and sink resealing with new mould-resistant silicone for homes and businesses in Cold Higham and across Northamptonshire. Send photos for a free, fixed quote.
- Mould you cannot clean out
- Leaks at the edges
- Sealant that is split or lifting
About Cold Higham
Cold Higham is about 4 miles north-west of Towcester, in Northamptonshire. Anywhere in NN12, we carry out the work at your property. Our technicians cover 364 places across Northamptonshire, from the larger towns to small villages. Our nearest city page is Birmingham, about 42 miles away.
Here we cover the NN12 postcode area. From Church Lane and Banbury Lane or a nearby road, we can come to you. If you’re just outside Cold Higham, we cover Pattishall (1 mile north-east), Grimscote (1 mile west), Astcote (1 mile east), Eastcote (1 mile east) and Litchborough (2 miles west). Within a short drive, we also cover Northampton (8 miles north-east), Daventry (8 miles north-west), Brackley (11 miles south-west), Towcester (4 miles south-east), Wolverton (12 miles south-east) and Stony Stratford (11 miles south-east).
Landmarks near Cold Higham
Our customers here include homes close to Church of St Luke and Pattishall Church of England Primary School and the streets around them. Further afield, we also cover the area around Farthingstone Castle Dykes (3.4 miles north-west). The countryside around Cold Higham includes Ramsden Corner Plantation.
How we handle bath resealing in Cold Higham
All of the old sealant is cut out, treat any mould, and apply fresh mould-resistant silicone. We do this for baths, showers, sinks and worktops, including the awkward bits behind the taps. We regularly repair wet rooms, baths and kitchen worktops & sinks, and people most frequently call us about an untidy old seal and gaps in the seal.
Your repair is guaranteed for a year, as with every job we do.
- Where
- Cold Higham (NN12)
- Region
- Northamptonshire
- Guarantee
- A year, on every repair
- Quote
- Free and fixed, from your pictures
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
Towns and villages near Cold Higham
Other services in Cold Higham
The process
It’s a tidy, low-fuss visit. We confirm the time with you beforehand, protect the area, and get on with the job, which normally takes around two hours. If anything looks different from your pictures, we’ll talk to you before going ahead.
- All the old sealant is cut out and removed.
- The joint is cleaned and any mould treated.
- We dry the joint thoroughly.
- Baths are filled with water first, so the joint is at its widest.
- We apply new mould-resistant silicone and tool it to a neat finish, taps included.
How to prepare
- Mention if the room is upstairs or in a flat
- Avoid using the area for a few hours before we arrive
- Let us know about parking or access
Get a quote
You do not need a survey visit. Nearly every job can be priced from photos: we need a close-up, a wider picture and your postcode, and we’ll reply with a fixed price.
Read more
Cold Higham: your questions answered
Is there any odour?
Some materials have a smell while they’re applied. It fades as everything cures.
What information do you need?
Some photos, your postcode and how to reach you. On the day, we only need access to the room.
Can pets and children be at home?
Just keep them out of the work area. We’ll tell you when the room can be used again.
Why does mould come back so fast?
Typically poor ventilation and moisture sitting on the joint. We use mould-resistant silicone, and ventilation helps it last.
Do I need to be at home?
Yes. We need access to the room while we work, at a time we agree with you.
Will it make a mess?
Very little mess: we sheet and mask everything nearby, and we take our waste away with us.
Are there extra charges for Cold Higham?
There is no separate call-out charge. The fixed quote covers the visit and the work.
How much does bath resealing cost in Cold Higham?
Every job gets a fixed price from your photos. Send a close-up and a picture of the whole item with your NN12 postcode.
What we’re called out for in Cold Higham
Black mould is the most common reason people reseal. It grows into the silicone, so cleaning can’t get it all out.
Signs it’s time to call us include:
- Damp near the bath
- Discoloured, yellow sealant
- Gaps by the taps
- Black spots in the silicone
What to look for in a quote
- How the colour is matched
- Who will actually do the work
- What happens if the damage is worse than the pictures show
- How long it needs to cure
Work for landlords and builders
We regularly work with letting and managing agents. Send the address, pictures and access details and we’ll arrange it.
We carry out planned and one-off repairs for housing associations and facilities teams. A repair avoids taking out and refitting, which is easier on the people living there.
Should I try a DIY kit first?
A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.
You can buy a DIY kit for most repairs, and they can tidy up a tiny mark. The trouble is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair will not last.
How to look after the repair
Once the work has cured, treat it gently:
- Wipe the joints dry after use
- Keep bottles off the joints
- Run the extractor fan during and after showers
- Clean the joints with a mild cleaner
Avoid scraping the joints, and keep shampoo bottles off the joints.
Damp below or loose tiles need checking quickly. There may be more going on, so we will tell you if it needs a builder or plumber.
Resealing in Cold Higham: why it matters
Resealing is routine maintenance. Leaving split or mouldy sealant lets water get behind the bath or tray, which costs far more to put right. Instead of hourly rates, we fix the price before we start. Damage, material and access decide it.
Why Cold Higham customers choose us
- Dust sheets down, tidy finish
- Straight answers about what a repair can do
- Work done at your home or business
- One visit for most repairs
Read our pricing.
What bath resealing costs
Each job gets its own fixed price. These are the things that affect it:
- Doing more than one item at once
- The type of damage
- How much damage there is
- Unusual colours or finishes
We charge the same wherever you are, so there’s no premium for Cold Higham. What changes the price is the job itself: the material, the amount of damage and how many items.
Send pictures for a quote
You can take the photos on your phone, there’s no need for anything special. Make sure they show:
- A wider photo showing the entire bath or shower
- Where you are, by postcode
- What it’s made of, if you know
- A coin beside the damage so we can judge size
Pricing is simple: snap the damage close up and then the entire item, send them to us with your postcode, and we will reply with a fixed price. There’s no charge for the quote and no obligation.
What your bath or shower is made of matters
Sinks and worktops
We reseal basins, vanity tops and kitchen worktops, once the joint is completely dry.
Shower trays
Trays are sealed with weight on them, for the same reason.
About our accreditations · Every repair comes with a one-year guarantee.
