Greater London · England
Bath & shower resealing (mastic) in Coombe Hill, Greater London
Our technicians come to Coombe Hill for bath, shower and sink resealing with new mould-resistant silicone. Nothing is taken out, and the work is guaranteed.
- Unsealed corners
- Black mould in the sealant
- Gaps in the seal
Coombe Hill: your questions answered
How long does silicone take to cure?
Normally about a day later. We’ll tell you the exact time.
Will it make a mess?
Dust sheets and masking go down before we start, and we clean up when we’ve finished.
What if the damage is worse than the pictures show?
Your quote covers the damage in the photos. If there’s more, we will tell you before starting.
Does someone need to be in?
Yes. The technician needs access to the room for the visit, at a time we agree with you.
Is it OK to have pets in the house?
Just keep them out of the work area. We will tell you when the room can be used again.
Why does the silicone keep cracking?
Movement is the usual cause, or it was sealed with the bath empty. We seal baths full of water.
Can you repair something that is been repaired before?
Most of the time. Tell us what was done before and we will plan for it.
What does bath resealing cost?
We give a fixed price from your pictures. Send a close-up and a photo of the whole item and your postcode.
About our bath resealing in Coombe Hill
All of the old sealant is cut out, treat any mould, and apply fresh mould-resistant silicone. We reseal baths, showers, sinks and worktops, and that includes the awkward spots behind the taps. Common call-outs are for mould you can’t clean out and old sealant that looks dirty, across basins & vanity units, baths and kitchen worktops & sinks.
We stand behind the work with a one-year guarantee, so you’re not left on your own once we’ve gone.
- Where
- Coombe Hill (SW15, KT2)
- Region
- Greater London
- Guarantee
- A year, on every repair
- Quotes
- Free, fixed price from pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
Different materials, different repairs
Baths
Baths are resealed with water in them, so the joint is at its widest.
Shower trays
We put weight on a tray before sealing it, for the same reason.
Why reseal now?
A reseal is one of the cheapest bathroom jobs there is. Failed sealant can lead to water damage that is much more expensive. There are no surprise extras on the day. The price we quote from your pictures is the price you pay, and if the damage turns out to be different, we discuss it before starting.
Why us?
- We come to you, anywhere in the UK
- Accredited with CHAS, Constructionline and SafeContractor
- Nothing taken out or refitted
- Every repair guaranteed for a year
Take a look at our prices page.
How it works
On the day, we arrive at the time we’ve agreed, cover the area with dust sheets and masking, and set to work. Expect it to take about two hours for a bath. We tidy up before we leave and tell you when it’s ready to use.
- We protect the area and mask the joint lines.
- Old sealant and residue are removed.
- The joint is cleaned, treated and dried.
- Fresh silicone is applied in a continuous bead.
- The bead is smoothed, the tape removed and the seal left to cure.
Before we arrive
- Move bottles, mats and clutter away from the area
- Let us know which floor the room is on
- Tell us about any previous repairs or coatings
Ask for a price
There’s no need for us to visit first. Nearly every job can be priced from photos: send a close-up, a wider shot and your postcode, and we will reply with a fixed price.
Related advice
Honest limits
A repair isn’t always the answer, and we will tell you before we start. We can’t fix:
- Hidden water damage
- Gaps too big for silicone alone
- A flexing bath
If in doubt, send photos and we will say what we think.
What we work on
- Kitchen worktops & sinks
- Shower trays & enclosures
- Basins & vanity units
- Wet rooms
- Baths
Landlord and trade work in Coombe Hill
Builders, developers and site managers book us for snagging repairs, putting right damage done during fitting so nothing needs replacing. We hold CHAS, Constructionline and SafeContractor accreditations.
We work for landlords, letting agents and housing providers in Coombe Hill as well as householders. A repair between tenants keeps the property empty for less time, and it costs much less than replacing.
Our work in Coombe Hill
Coombe Hill is about 2 miles north-east of Kingston upon Thames, in Greater London. We work in every kind of home, from flats and terraces to detached houses and new builds, plus businesses and rented homes. Coombe Hill is one of 764 towns and villages in Greater London we cover. We work right across the region, from Coombe Hill to London (about 9 miles away).
Here we cover the SW15 and KT2 postcode area. You will find streets such as Keswick Avenue, Derwent Avenue and Robin Hood Lane. Coombe Hill is on the A308, which makes it straightforward to reach. If you are just outside Coombe Hill, we cover Kingston Vale (1 mile east), Putney Vale (1 mile east), Coombe (1 mile south), Norbiton (2 miles south-west) and Motspur Park (2 miles south-east). Further out, we also cover London (9 miles north-east), City of Westminster (7 miles north-east), Marylebone (8 miles north-east), Kensington (5 miles north-east), St Pancras (9 miles north-east) and Shoreditch (10 miles north-east).
Landmarks near Coombe Hill
Typical jobs here are in homes near Robin Hood Primary School, Richmond Park and Coombe Girls' School, among other places. Nearby too are Duke of Cambridge pub (within half a mile north-east), Canbury School (0.7 miles south-west) and St John the Baptist (within half a mile north-east). The nearest railway station is Norbiton station, about 1.6 miles south-west of the centre. Other landmarks nearby include Coombe (0.7 miles south) and Bentall Centre (2.2 miles south-west). Green spaces nearby include Kingston Hill Road area and Fishpond Wood and Beverley Meads.
When to call us in Coombe Hill
A bathroom without good ventilation is hard on sealant: moisture sits on the joints longer, and mould takes hold.
The most common problems we’re called about are:
- Discoloured, yellow sealant
- Black mould in the sealant
- Unsealed corners
- Silicone smeared on tiles
Questions to ask before booking
- When it can be used again
- How your room will be protected
- How changes to the job are handled
- Who will actually do the work
Nearby places to Coombe Hill
What else we do in Coombe Hill
Can I fix it myself?
DIY kits are sold for most surfaces, and they can tidy up a tiny mark. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair will not last.
If you’re set on a kit, follow its instructions closely and work on a clean, dry surface, and do not use it until it has fully cured. If it fails, we can still put it right.
How to care for the repair
Simple care helps the repair last. Our advice:
- Use the extractor fan
- Don’t stand toiletries on the seal
- Open a window after bathing
- Clean the sealant gently and regularly
Run the extractor fan, dry the joints after bathing, and give them a regular clean with a mild cleaner to slow mould growth.
Don’t wait until water gets behind the bath. Split or lifting sealant is a sign it’s time.
About our accreditations · Every repair comes with a one-year guarantee.
