Pembrokeshire · Wales

Bath Resealing for Coombs homes

Bath resealing in and around Coombs: a fixed quote from pictures, a tidy visit and a one-year guarantee.

  • Damp near the bath
  • Missing sealant behind the taps
  • Discoloured, yellow sealant
Surface Doctor technician refinishing the outside of a roll-top bath

Bath resealing in Coombs

Coombs and the surrounding area

Coombs is about 32 miles west of Carmarthen, in Pembrokeshire. Jobs in Coombs are booked in like any other job: a fixed quote from photos, and a technician at your door on the day. Coombs is one of 223 towns and villages in Pembrokeshire we cover.

All of SA73 is within our area. Jobs here include addresses on Pill Lane, Pill Road and Larch Road and the roads around them. Coombs is on the A4076, so it’s easy for us to reach. If you are just outside Coombs, we cover Pill (1 mile south-west), Milford Haven (1 mile west), Priory (1 mile north-west), Steynton (1 mile north) and Haven's Head (1 mile west). Further out, we also cover Haverfordwest (6 miles north), Pembroke (5 miles south-east), Pembroke Dock (4 miles south-east), The Marsh (6 miles north-east), Dinbych-y-Pysgod (14 miles east) and The Green (14 miles east).

Near you in Coombs

Typical jobs here are in homes near Milford Haven School, Sir Charles Whetham pub and Milford Haven Community Primary School, among other places. The closest station to Coombs is Milford Haven station, roughly 0.8 miles west. A little further out are South Pembrokeshire Hospital (3.2 miles south-east) and Castle Pill (less than half a mile east). For a walk, there is Hubberstown Pill and Boltonhill.

Map of Coombs © OpenStreetMap contributors

Bath resealing in Coombs, done in place

We reseal baths, shower trays, basins and worktops using mould-resistant silicone. Most jobs take a couple of hours, then it needs to cure. If you’re dealing with mould you can’t clean out and gaps by the taps, we can normally put it right.

You’re covered after we leave: our one-year guarantee applies to every job, and we will explain exactly what it covers when we quote.

Where
Coombs (SA73)
County
Pembrokeshire
Cover
12 months on all our work
Quotes
Free, fixed quote from pictures
Phone
0345 017 0787
Updated
23 October 2026
Roll-top bath being refinished by a Surface Doctor technician

Why reseal now?

A reseal is one of the cheapest bathroom jobs there is, and it protects everything around the bath. Failed sealant can lead to water damage that is much more expensive. Every job is a little different, so each one is priced on its own. The size and type of damage, the material and access all make a difference, and doing several things on one visit costs less than separate visits.

Why book with us

  • One-year guarantee on every repair
  • We will tell you if it’s not worth repairing
  • CHAS, Constructionline and SafeContractor accredited
  • Repair technicians who travel to you, UK-wide

See our pricing.

DIY repairs versus a professional job

You can buy a DIY kit for most repairs, and they can make a small mark look better. The trouble is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair will not last.

If you’ve already tried a DIY fix, that’s fine. We take the old repair out and do it properly, so it won’t stop us repairing it. Just mention it when you send pictures, as it can add time.

When to call us in Coombs

A bathroom without good ventilation is hard on sealant: damp hangs around, and mould takes hold.

Typical reasons for a call-out include:

  • An untidy old seal
  • Gaps by the taps
  • Discoloured, yellow sealant
  • Black mould in the sealant

Comparing quotes

  • Whether the price covers travel
  • Whether the colour is mixed to match
  • Is the price fixed, and does it include VAT?
  • What happens if the damage is worse than the pictures show

Our hiring checklist

Honest limits

We won’t take on work that won’t last, so here’s what a repair cannot put right:

  • Tiles that move, until they’re refixed
  • Gaps too big for silicone alone
  • A flexing bath

Not sure? Send photos and we’ll give you a straight answer before you book.

Surfaces we repair

  • Shower trays & enclosures
  • Kitchen worktops & sinks
  • Baths
  • Basins & vanity units
  • Wet rooms

How to care for the repair

A little care keeps the finish looking good. Our advice:

  • Store bottles on a shelf
  • Open a window after bathing
  • Keep the joints dry
  • Reseal at the first sign of lifting

Let it cure fully before using the bath or shower, normally about a day.

Don’t wait until water gets behind the bath. Split or lifting sealant is a sign it’s time.

What your bath or shower is made of matters

Baths

We fill the bath before sealing, so the joint is at its widest.

Sinks and worktops

We reseal basins, vanity tops and kitchen worktops, with the joint fully dried first.

How we price bath resealing

Quotes are free and the price is fixed. What we take into account:

  • How easy the damage is to reach
  • The type of damage
  • The material and finish
  • Previous DIY repairs that have to come out

The price depends on the type and amount of damage, the material and how many jobs we combine into one visit. We give a fixed price from your pictures, so you know the cost before booking.

Getting a price from photos

We price nearly every job from photos. This is what we need:

  • A coin or ruler next to the damage for scale
  • Your postcode, so we can check dates
  • One sharp close-up of the damage
  • Natural light rather than flash

Pricing is simple: take a close-up of the damage and a picture from further back, send them over with your postcode, and you will get a fixed quote back. There’s no charge for the quote and you’re under no obligation.

The process

The work is clean and fairly quiet. We protect the area first, then the job itself takes around two hours. Before we leave, we explain the curing time and the aftercare.

  1. We cut out all of the old sealant.
  2. We remove the residue and clean the joint.
  3. Any mould is treated and the joint dried.
  4. The bath is filled with water, or weight put on the tray.
  5. New mould-resistant silicone is applied and tooled neatly.

How to prepare

  • Let us know if it has been repaired before
  • Clear toiletries, mats and anything else from around the area
  • Ensure the area is dry

Ask for a price

A quote takes minutes to ask for: photograph the damage, then the whole bath or shower, add your postcode and send them to us. You will get a fixed price, not an estimate.

Get a fixed quote

Related advice

FAQs for Coombs

How long does a reseal take?

Around two hours for a bath, plus curing time.

Why does my sealant keep going mouldy?

Normally poor ventilation and moisture sitting on the joint. Mould-resistant silicone and good ventilation help.

Is it messy?

Dust sheets and masking go down before we start, and we clean up when we have finished.

Can landlords book you?

We do, regularly. We quote for multiple addresses and fit around tenancy changeovers.

What if the damage is worse than the pictures show?

The price is fixed for what the photos show. If there is more, we will tell you before starting.

Can you redo someone else’s repair?

Normally, yes. We remove the old repair before doing a new one, so mention it when you send pictures.

Are you accredited?

We’re accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.

Is it OK to have pets in the house?

On the day, the room should be kept clear of pets and children, so the repair isn’t disturbed while it cures.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.