Hampshire · England
Bath & shower resealing (mastic) in Deadwater, Hampshire
Our technicians come to Deadwater for bath, shower and sink resealing with new mould-resistant silicone. Nothing is taken out, and the work is guaranteed.
- Unsealed corners
- Stained silicone
- A messy previous reseal
Should I try a DIY kit first?
The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.
If you do try a kit, read the instructions carefully and work on a clean, dry surface, and give it the full curing time. If it fails, we can still put it right.
About our bath resealing in Deadwater
A good reseal is all about preparation: every bit of old silicone out, mould treated, the joint clean and dry. Then the fresh sealant goes on, in a neat, continuous bead. Our repair technicians work on shower trays & enclosures, wet rooms and kitchen worktops & sinks, and the jobs we see most are missing sealant behind the taps and stained silicone.
You get a one-year guarantee, the same in Deadwater as everywhere else we work.
- Where
- Deadwater (GU35)
- Region
- Hampshire
- Guarantee
- One year on every repair
- Quote
- Fixed and free, based on photos
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
How we price bath resealing
A fixed quote means you know the cost before you book. We take into account:
- What kind of damage it is
- Previous DIY repairs that have to come out
- Whether we combine several jobs
- What the surface is made of
Rather than charging by the hour, we price the entire job up front. Damage, material and access decide it, and combining items on one visit brings it down.
Getting a price from photos
You can take the pictures on your phone, there’s no need for anything special. Just ensure we can see:
- Your postcode, so we can check dates
- A wider photo showing the whole bath or shower
- Details of any past repairs
- The material, if you know it
Getting a quote takes a couple of minutes: take one close-up and one wider shot of the bath or shower, add your postcode and send them over. You’ll get a fixed quote, not an estimate.
Our work in Deadwater
Deadwater is about 1 mile east of Bordon, in Hampshire. Clients in Deadwater get the same service as everywhere else we cover: a fixed quote from photos, then a visit to do the work. We work in 683 places in Hampshire. We work right across the region, from Deadwater to London (about 42 miles away).
Jobs in GU35 are booked in the same way as anywhere else. Streets in the area include Alma Road, Varna Road and Rowan Road. We also cover the places around Deadwater: Lindford (1 mile north-east), Bordon (1 mile west), Hollywater (1 mile south), Standford (1 mile south-east) and Pinewood Village (1 mile north-west). Larger places within reach include Basingstoke (15 miles north-west), Farnborough (13 miles north), Fleet (11 miles north), Aldershot (10 miles north-east), Alton (6 miles north-west) and Petersfield (8 miles south-west).
Local landmarks in Deadwater
Typical jobs here are in homes near Weyford Nursery and Primary School, Mill Chase Academy and St Mark's Sacred Church. The nearest railway station is Liphook station, roughly 3.6 miles south-east. Nearby you’ll also find Chase Community Hospital (0.7 miles south-west). Green spaces nearby include Deadwater Valley and Selborne Hill.
Keeping it looking good
Most damage we see is avoidable. A few tips:
- Clean the sealant gently and regularly
- Ventilate the bathroom well
- Wipe the joints dry after use
- Don’t stand toiletries on the seal
Good ventilation is the best protection, and wipe the joints after use.
Damp below or loose tiles need checking quickly. There may be more going on, and we will say if you need a builder or plumber.
Questions from Deadwater
How soon can you come?
We’ll give you dates with your quote. Tell us if you need it done quickly.
Do you hold any accreditations?
We are accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
How long will it take?
Most reseals take about two hours. It then needs time to cure.
What happens after I send pictures?
You will get a fixed quote back. You’re under no obligation.
What do you need from me?
Send pictures through the quote form or call 0345 017 0787, and we’ll take it from there.
Do you work for landlords and businesses?
Yes. We carry out repairs for householders, landlords, letting agents, builders and businesses in Deadwater.
Will it make a mess?
Very little mess: we sheet and mask everything nearby, and we take our waste away with us.
Is a repair better than a new one?
Generally, yes. Replacement brings removal, refitting and making good, which a repair avoids. If it isn’t worth repairing, we’ll tell you.
Why reseal now?
A reseal is one of the cheapest bathroom jobs there is. Failed sealant can lead to water damage that is much more expensive. The price reflects the work involved, not your postcode. The full price is agreed before you book, with nothing added on the day.
Why choose Surface Doctor in Deadwater
- We will tell you if it’s not worth repairing
- Most jobs done in one visit
- No extra charge for your area
- Every repair guaranteed for a year
Take a look at our prices page.
Honest limits
To be straight with you, there are a few things a repair won’t fix:
- Water damage behind the bath that needs a builder
- Very wide gaps that need a trim
- Tiles that move, until they’re refixed
Send us photos and we will tell you honestly before you book.
Materials we work on in Deadwater
- Wet rooms
- Shower trays & enclosures
- Kitchen worktops & sinks
- Basins & vanity units
- Baths
Also near Deadwater
Also in Deadwater
Do you need bath resealing in Deadwater?
Joints split if the bath or tray moves, frequently because it was sealed while the bath was empty.
It’s worth getting a quote if you see:
- Gaps in the seal
- Gaps by the taps
- Leaks at the edges
- Black mould in the sealant
Before you book anyone
- What the guarantee covers, and for how long
- What prep work is covered
- How the colour is matched
- Aftercare advice
Landlord and trade work in Deadwater
We regularly price jobs from inventory or check-out pictures. That means we can quote before you even visit the property, and we liaise with tenants about access if you’d like us to.
We regularly work with letting and managing agents. Send the address, pictures and access details and we will arrange it.
What we do, step by step
On the day itself, there is little for you to do. Let us in and show us the room, and we will get on with it. The job generally runs to about two hours for a bath.
- First we strip out every bit of the old mastic.
- Next we clean the joint and deal with mould.
- We dry the joint thoroughly.
- Baths are filled with water first, so the joint is at its widest.
- We run a new bead of mould-resistant silicone and smooth it neatly, including around the taps.
Preparing for the visit
- Mention if the room is upstairs or in a flat
- Keep pets and children out of the room while we work
- Mention any earlier repairs or resurfacing
Getting a price
Most customers in Deadwater get their price from photos. Add a line about what happened and your postcode, and we will send back a fixed quote and some dates.
Read more
About our accreditations · Every repair comes with a one-year guarantee.
