Hampshire · England

Bath & shower resealing (mastic) in Deane, Hampshire

Bath, shower and sink resealing with new mould-resistant silicone for homes and businesses in Deane and across Hampshire. Send photos for a free, fixed quote.

  • An untidy old seal
  • Gaps in the seal
  • Leaks at the edges
Surface Doctor technician refinishing the outside of a roll-top bath

Bath resealing for Deane homes

Where we work around Deane

Deane is about 5 miles west of Basingstoke, in Hampshire. Our work suits any type of property, old or new, large or small, plus businesses and rented homes. We cover 683 places in Hampshire. Our nearest city page is London, about 51 miles away.

Our repair technicians cover all of RG25. Close by, we cover Oakley (2 miles east), Overton (2 miles west), Quidhampton (2 miles west), Newfound (2 miles east) and North Waltham (2 miles south-east). Within a short drive, we also cover Basingstoke (5 miles east), Winchester (14 miles south), Andover (12 miles west), Alton (12 miles south-east), Tadley (8 miles north-east) and Hook (12 miles east).

Around Deane

Our clients here include homes close to Church of All Saints and the streets around them. Deane’s nearest station is Overton station, roughly 2 miles west. A little further out are Park Prewett Hospital (4.8 miles north-east). For a walk, there’s Farleigh Hill.

Map of Deane © OpenStreetMap contributors

How we handle bath resealing in Deane

Baths, trays, basins and kitchen worktops all get resealed using mould-resistant silicone. Most jobs take a couple of hours, plus curing time. We are often asked to fix old sealant that looks dirty and missing sealant behind the taps, across shower trays & enclosures, baths and basins & vanity units.

You get a one-year guarantee, the same in Deane as everywhere else we work.

Location
Deane (RG25)
Region
Hampshire
Cover
A year, on every repair
Price
Free and fixed, from your pictures
Phone
0345 017 0787
Updated
23 October 2026
Surface Doctor technician refinishing the outside of a roll-top bath

Different materials, different repairs

Shower trays

We put weight on a tray before sealing it, for the same reason.

Sinks and worktops

We reseal basins, vanity tops and kitchen worktops, with the joint fully dried first.

Do you need bath resealing in Deane?

Sealant splits when the bath or tray moves, often because it was sealed while the bath was empty.

Common reasons people in Deane contact us include:

  • Stained silicone
  • Unsealed corners
  • Black spots in the silicone
  • Sealant that’s split or lifting

Comparing quotes

  • If travel is included in the price
  • Who will actually do the work
  • What the guarantee covers, and for how long
  • How soon you can use it again

How to compare quotes

The process

We begin by going over the job with you, so you know exactly what we are doing. After that, protection goes down around the work area and the work begins. You can expect it to take about two hours for a bath.

  1. The old silicone is cut out completely.
  2. We remove the residue and clean the joint.
  3. Any mould is treated and the joint dried.
  4. We fill the bath, or weight the tray, to open the joint.
  5. We apply fresh mould-resistant silicone and tool a neat bead.

How to prepare

  • Mention any parking restrictions or tricky access
  • Keep pets and children out of the room while we work
  • Tell us if there are stairs or a lift

Ask for a price

For most jobs, pictures are all we need to give you a price. Tell us what happened and where you are, and we will send back a fixed quote and some dates.

Send pictures for a quote

Related advice

Honest limits

A repair is not right for every job, including:

  • Hollow or loose tiles
  • Movement in the bath or tray
  • Rotten walls or floors behind the bath

If in doubt, send photos and we’ll say what we think before booking.

What we work on

  • Kitchen worktops & sinks
  • Wet rooms
  • Shower trays & enclosures
  • Baths
  • Basins & vanity units

How to care for the repair

Aftercare is simple:

  • Give the seal a regular clean
  • Let steam out after showers
  • Keep bottles off the joints
  • Ventilate the bathroom well

Let it cure fully before using the bath or shower, typically around 24 hours.

If you notice damp, stains on the ceiling below or loose tiles, act quickly. It may be more than a reseal, and we will say if you need a builder or plumber.

Deane: your questions answered

Can you redo someone else’s repair?

Generally, yes. Let us know what was used before.

How long does silicone take to cure?

Normally about a day later. We’ll tell you the exact time.

Do you work for landlords and businesses?

We do, regularly. We can quote for several properties together and work between tenancies.

Can new silicone go over old?

All the old sealant comes out. New silicone won’t bond to old.

What does bath resealing cost?

Every job gets a fixed price based on photos of the damage. Send a close-up of the damage and a wider photo and your postcode.

Do the materials smell?

Expect a mild smell while we’re working that clears as it cures.

How long will it take?

Around two hours for a bath, plus curing time.

How do I book?

A close-up, a wider photo and your postcode. After that, we just agree a date.

Is resealing worth it?

A professional reseal costs little compared with water damage. It’s quick, tidy and protects your home. The price reflects the work involved, not where you live. The full price is agreed before booking.

Why us?

  • A year’s guarantee on all work
  • We’ll tell you if it’s not worth repairing
  • Most jobs done in one visit
  • CHAS and Constructionline accredited

See our pricing.

DIY kit or professional repair?

A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.

If you do try a kit, read the instructions carefully, ensure the area is clean and completely dry, and don’t use it until it has fully cured. If it does not work out, we can still repair it properly.

How we price bath resealing

Quotes are free and the price is fixed. What we look at:

  • Previous DIY repairs that have to come out
  • Whether we combine several jobs
  • What kind of damage it is
  • The material and finish

Set against the cost of replacement, repairing usually costs far less, because there’s no removal, plumbing or making good. Your fixed quote shows exactly what’s included.

How to get a fixed price

The better the photos, the more accurate the price. Here’s what we find most useful:

  • Any earlier repairs or coatings
  • A close-up of the damage, in focus
  • A wider photo showing the whole bath or shower
  • A coin beside the damage so we can judge size

For a price in Deane, the easiest route is pictures: one close up, one from further back, plus your postcode. We reply with a fixed quote and our next available dates.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.