Hampshire · England

Bath & shower resealing (mastic) in East Anton, Hampshire

Our technicians come to East Anton for bath, shower and sink resealing with new mould-resistant silicone. Everything is done in place, and the work is guaranteed.

  • Gaps by the taps
  • Silicone coming away from the tiles
  • Discoloured, yellow sealant
Surface Doctor technician refinishing the outside of a roll-top bath

Book bath resealing in East Anton

How we handle bath resealing in East Anton

A fresh seal protects your bathroom. Old, split or mouldy sealant lets water get behind the bath or tray, and resealing puts a stop to that. Whether it’s water getting behind the bath or tray and silicone coming away from the tiles, we can generally put it right.

A one-year guarantee comes with the work, just as it does everywhere we cover.

Location
East Anton (SP11)
Area hub
Hampshire
Cover
12 months on all our work
Quote
Free and fixed, from your pictures
Phone
0345 017 0787
Last updated
23 October 2026
Roll-top bath being refinished by a Surface Doctor technician

FAQs for East Anton

Do you hold any accreditations?

Yes, including CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.

Why does my sealant keep going mouldy?

Mostly moisture and poor ventilation. We use mould-resistant silicone, and ventilation helps it last.

How much does bath resealing cost in East Anton?

Every job gets a fixed price from your photos. Send a close-up and a picture of the whole item with your SP11 postcode.

When can I use the bath after resealing?

Usually after around 24 hours. We will tell you the exact time.

What happens if you find more damage?

Your quote covers the damage in the photos. If there is more, we’ll tell you before starting.

Is it safe with children and pets around?

Keep pets and children away from the work area on the day, mainly so nothing gets touched before it has cured.

Is there a call-out fee?

No. Our quotes include travel, with the same prices everywhere we work.

My seal keeps tearing. Why?

Movement is the usual cause, or it was sealed with the bath empty. We fill the bath before sealing it.

Covering East Anton

East Anton is about 1 mile north-east of Andover, in Hampshire. Jobs in East Anton are booked in like any other job: a fixed quote from pictures, and a technician at your door on the day. East Anton is one of 683 places in Hampshire we cover. You can also see our page for London, about 62 miles away.

Every address in SP11 is within our area, from the main roads to the quietest streets. That includes homes on Cobb Drive, Long Barn Road and Pasture Walk and the roads around them. If you’re just outside East Anton, we cover Knights Enham (1 mile north-west), Finkley (1 mile north-east), Finkley Down (1 mile south-east), Smannell (1 mile north-east) and Enham Alamein (1 mile north). Within a short drive, we also cover Winchester (13 miles south-east), Hyde (13 miles south-east), Tidworth (9 miles west), Weeke (12 miles south-east), Kempshott (14 miles east) and Stanmore (13 miles south-east).

Landmarks near East Anton

Our customers here include homes close to St Paul Church Centre, Winton Community Academy and Winton Community Academy. Nearby too are Endeavour Primary School (under half a mile north) and The Oak pub (0.9 miles north-east). The closest station to East Anton is Andover station, about 1.6 miles south-west of the centre. Other landmarks nearby include Andover War Memorial Hospital (1.5 miles south-west) and Finkley Down Farm Museum (0.6 miles south-east). Not far away are Mill Lake and Anton Lakes.

Map of East Anton © OpenStreetMap contributors

Why it’s worth resealing in East Anton

Compared with repairing water damage, resealing is cheap. It’s a quick job that protects your walls and floors. A few things move the price: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Photos let us give you a fixed figure.

What you get with us

  • Every repair guaranteed for a year
  • Same prices wherever you are
  • Honest advice, even when it means no job
  • Nothing taken out or refitted

Take a look at our prices page.

DIY kit or professional repair?

If you’re set on a kit, follow its instructions closely and work on a clean, dry surface, and do not use it until it has fully cured. If it does not work out, we can still repair it properly.

DIY kits are sold for most surfaces, and they can tidy up a tiny mark. The trouble is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair will not last.

What we cannot put right

A repair is not right for every job, for example:

  • A bath or tray that moves, until its support is fixed
  • Gaps too big for silicone alone
  • Tiles that move, until they’re refixed

Not sure? Send pictures and we will give you a straight answer.

What we work on

  • Wet rooms
  • Kitchen worktops & sinks
  • Shower trays & enclosures
  • Baths
  • Basins & vanity units

How the visit works

From the moment we arrive, the aim is to do the job without disturbing the rest of your home. Surfaces nearby are masked off, the job takes a couple of hours, and we finish with a tidy-up and a look at the finished work together.

  1. First we strip out every bit of the old mastic.
  2. Next we clean the joint and deal with mould.
  3. The joint is dried thoroughly.
  4. For a bath, we fill it with water first so the joint is at its widest.
  5. We apply new mould-resistant silicone and tool it to a neat finish, including around the taps.

Preparing for the visit

  • Tell us about any previous repairs or coatings
  • Mention any parking restrictions or tricky access
  • Point us to the nearest place to park

Get a quote

Getting a price is easy: snap the damage close up and then the entire item, send them over with your postcode, and you’ll get a fixed price back. Quotes are free and no obligation.

Send photos for a quote

Read more

What we are called out for in East Anton

Black mould is the most common reason people reseal. It grows into the silicone, so cleaning only removes the surface.

Most people contact us when they notice one of these:

  • Mould you can’t clean out
  • Discoloured, yellow sealant
  • An untidy old seal
  • Gaps by the taps

What your quote should include

  • Who turns up on the day
  • How long the guarantee is and what it covers
  • Aftercare advice
  • When it can be used again

10 questions to ask before booking

Materials and what they mean for the repair

Baths

Baths are resealed with water in them, so the joint is at its widest.

Shower trays

We put weight on a tray before sealing it, for the same reason.

For landlords and businesses

Rented homes see more wear and tear, and replacing items every time a tenant leaves is expensive. A repair between tenancies is a cheaper way to keep the property in good order.

We’re used to working with agents and managing companies. Send the address, pictures and access details.

Keeping it looking good

Looking after the surface is easy, and it makes a real difference:

  • Clean the joints with a mild cleaner
  • Ventilate the bathroom well
  • Replace the seal when mould sets in
  • Dry the seal after bathing

Avoid scraping the joints, and keep shampoo bottles off the joints.

Reseal before water gets in. Gaps or lifting edges mean it needs doing.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.