Gloucestershire · England

Bath & shower resealing (mastic) in Ebrington, Gloucestershire

Bath resealing across Ebrington and nearby, done in a single visit in most cases.

  • A messy previous reseal
  • Leaks at the edges
  • Gaps in the seal
Surface Doctor technician refinishing the outside of a roll-top bath

Bath resealing near Ebrington

Bath resealing in Ebrington, done in place

Baths, trays, basins and kitchen worktops all get resealed using mould-resistant silicone. A typical reseal takes a couple of hours, then it needs to cure. We’re frequently asked to fix missing sealant behind the taps and black mould in the sealant, in kitchen worktops & sinks, baths and basins & vanity units.

You’re covered for a year from the day of the repair. Just call us if there’s a problem and we’ll come back.

Where
Ebrington (GL55)
Area hub
Gloucestershire
Cover
One year on every repair
Price
Free and fixed, from your photos
Phone
0345 017 0787
Page updated
23 October 2026
Technician in a mask working on a freestanding roll-top bath

Prices and what affects them

You won’t pay by the hour. The price is based on:

  • Any earlier repairs that need removing first
  • Access to the area
  • Whether it’s a chip, crack, burn or wear
  • How many areas need work

We charge the same wherever you are, with no extra for Ebrington. What changes the price is the job itself: the material, the amount of damage and how many items.

Getting a price from pictures

You can take the pictures on your phone, there’s no need for anything special. Make sure they show:

  • A close-up of the damage, in focus
  • One picture of the whole bath or shower
  • Good light, ideally daylight, without flash glare
  • Details of any past repairs

Most clients in Ebrington get their price from pictures. Tell us what happened and where you are, and we’ll reply with a fixed quote and the earliest dates we have.

Questions from Ebrington

How do I stop mould in sealant?

Typically poor ventilation and moisture sitting on the joint. Mould-resistant silicone and good ventilation help.

Can you quote from photos?

Nearly always. If pictures do not show enough, we will ask for another angle.

How quickly can you book me in?

That depends on our diary for your area. We will offer you dates when we send your quote.

What happens after I send pictures?

We review the pictures and send a fixed quote with dates.

When can I use the bath after resealing?

Usually after around 24 hours. We confirm before we leave.

What if the damage is worse than the pictures show?

Your quote covers the damage in the pictures. If there’s more, we’ll tell you before starting.

I’m a tenant. Can you help?

Yes. Check with your landlord; we can send the quote to them too.

How long does resealing take?

Usually a couple of hours, plus curing time.

Covering Ebrington

Ebrington is about 9 miles east of Evesham, in Gloucestershire. We visit homes and businesses in Ebrington and nearby villages, so nothing has to leave your home. We cover all 470 towns and villages in Gloucestershire. We work right across the region, from Ebrington to Birmingham (about 29 miles away).

All of GL55 is covered. Streets in the area include Saxon Fields, Nash's Lane and New Road. If you are just outside Ebrington, we cover Paxford (2 miles south), Broad Campden (2 miles south-west), Chipping Campden (2 miles west), Northwick Park (2 miles south-west) and Draycott (3 miles south). We also work in nearby towns such as Moreton-in-Marsh (5 miles south), Winchcombe (12 miles south-west), Bourton-on-the-Water (12 miles south), Stow-on-the-Wold (9 miles south), Upper Rissington (13 miles south) and Mickleton (3 miles north-west).

Landmarks near Ebrington

Our clients here include homes close to Chipping Campden School and Church of St Eadburga, among other places. The nearest railway station is Moreton-In-Marsh station, roughly 4.8 miles south. Well-known places in the area include Court Barn (2.1 miles west) and Ellen Badger Hospital (4.5 miles east). Green spaces nearby include Dover's Hill.

Map of Ebrington © OpenStreetMap contributors

What we’re called out for in Ebrington

Even good sealant eventually discolours, especially in a busy family bathroom. Steam, soap and movement all wear it down.

Most people get in touch after spotting one of these:

  • Unsealed corners
  • Water getting behind the bath or tray
  • Black spots in the silicone
  • Old sealant that looks dirty

Comparing quotes

  • How the room is protected while they work
  • How the colour is matched
  • What preparation is included
  • What aftercare is recommended

How to compare quotes

For landlords and businesses

Landlords, letting agents and housing providers in Ebrington use us as well as householders. A repair between tenants keeps the property empty for less time, and it costs much less than replacing.

For anyone letting property in or around Ebrington, we will quote for several properties at once. Just send pictures for each address and we’ll price them together.

What we can’t put right

A repair is not always the answer, and we’ll tell you before we start. We can’t fix:

  • A flexing bath
  • Loose tiles, which need refixing first
  • Water damage behind the bath that needs a builder

If in doubt, send photos and we will say what we think before you book.

Materials we repair

  • Baths
  • Kitchen worktops & sinks
  • Basins & vanity units
  • Wet rooms
  • Shower trays & enclosures

DIY repairs versus a professional job

You can buy a DIY kit for most repairs, and they can make a small mark look better. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair won’t last.

For a hairline mark somewhere you’ll never see, a kit may be enough. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.

Aftercare tips

Most damage we see is avoidable. A few tips:

  • Reseal when black spots won’t clean off
  • Give the seal a regular clean
  • Air the room after use
  • Wipe the joints dry after use

Avoid scraping the joints, and keep shampoo bottles off the joints.

Don’t wait until water gets behind the bath. Split or lifting sealant is a sign it’s time.

The process

From the moment we arrive, we keep the work contained to the one room. Surfaces nearby are masked off, the job takes about two hours for a bath, and we finish with a tidy-up and a look at the finished work together.

  1. We cut out and remove all of the old sealant.
  2. The joint is cleaned and any mould treated.
  3. We dry the joint thoroughly.
  4. Baths are filled with water first, so the joint is at its widest.
  5. We apply new mould-resistant silicone and tool it to a neat finish, including around the taps.

Preparing for the visit

  • Tell us about any previous repairs or coatings
  • Ensure the room can be ventilated
  • Let the surface dry out before the visit

How to get a price

There’s no need for us to visit first. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we will reply with a fixed quote.

Get a free quote

Advice

Different materials, different repairs

Shower trays

We put weight on a tray before sealing it, so the joint is at its widest.

Sinks and worktops

Basins, vanity units and kitchen worktops are resealed too, with the joint fully dried first.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.