Scottish Borders · Scotland

Bath Resealing in Ettrickbridge

Bath, shower and sink resealing with new mould-resistant silicone for householders, landlords and businesses in Ettrickbridge. Free, fixed quotes from your photos.

  • Old sealant that looks dirty
  • Black mould in the sealant
  • Sealant that is split or lifting
Surface Doctor technician refinishing the outside of a roll-top bath

Bath resealing in Ettrickbridge

About our bath resealing in Ettrickbridge

We reseal baths with them filled with water, so the joint opens fully, which stops the new seal tearing the first time the bath is used. We regularly repair basins & vanity units, kitchen worktops & sinks and shower trays & enclosures, and people most often call us about a messy previous reseal and stained silicone.

Every job is backed for twelve months, and the guarantee is the same wherever you live. We return to put right any problem with the work.

Area
Ettrickbridge (TD7)
Region
Scottish Borders
Cover
One year on every repair
Price
Free, fixed price from pictures
Phone
0345 017 0787
Page updated
23 October 2026
Technician in a mask working on a freestanding roll-top bath

Resealing in Ettrickbridge: why it matters

Compared with repairing water damage, resealing is cheap. It’s quick, tidy and protects your home. A repair typically costs much less than people expect, particularly next to the cost of replacement. Send photos and we will give you the exact figure.

What you get with us

  • No extra charge for your area
  • Work done at your home or business
  • Most jobs done in one visit
  • Nothing taken out or refitted

Take a look at our prices page.

Keeping it looking good

A little care keeps the finish looking good. Our advice:

  • Run the extractor fan during and after showers
  • Reseal when black spots won’t clean off
  • Dry the seal after bathing
  • Clean the sealant gently and regularly

Keep the room well ventilated, and dry the joints after bathing to keep mould away.

If you notice damp, stains on the ceiling below or loose tiles, act quickly. There may be more going on, so we will tell you if it needs a builder or plumber.

Ettrickbridge and the surrounding area

Ettrickbridge is about 9 miles north-west of Hawick, in the Scottish Borders. Wherever you are in the TD7 postcode area, we come to you. We cover all 89 towns and villages across the Scottish Borders. Our jobs stretch from Ettrickbridge to Edinburgh (31 miles away).

Every address in TD7 is covered. Ettrickbridge sits on or near the B7009, so getting to you is simple. Other places close to Ettrickbridge include Yarrowford (4 miles north), Broadmeadows (4 miles north), Woll (5 miles east), Ashkirk (5 miles east) and Selkirk (6 miles north-east). We also work in nearby towns such as Galashiels (10 miles north-east), Hawick (9 miles south-east), Peebles (13 miles north-west), Wilton (9 miles south-east), Innerleithen (8 miles north-west) and Melrose (11 miles north-east).

Near you in Ettrickbridge

Typical jobs here are in homes near Ettrickbridge Church and the streets around them. Open spaces near Ettrickbridge include Akermoor Loch.

Map of Ettrickbridge © OpenStreetMap contributors

Your questions about bath resealing in Ettrickbridge

Can pets and children be at home?

Yes, as long as they stay out of the room we are working in. We will let you know when it’s safe to use again.

How long before I can shower?

Normally after around 24 hours. We will tell you the exact time.

When can you do it?

It depends on the time of year and where you are. We will offer you dates when we send your quote.

Why does mould come back so fast?

Mostly moisture and poor ventilation. Mould-resistant silicone and good ventilation help.

How much does bath resealing cost in Ettrickbridge?

Every job gets a fixed price from your photos. Send a close-up and a photo of the whole item and your postcode.

Do you do work for letting agents?

Yes, often. We quote for multiple addresses and fit around tenancy changeovers.

Which areas do you work in?

All of the Scottish Borders, and the rest of the UK. Travel is included in the price.

Can you do more than one item on the same visit?

Yes. Doing several items on one visit usually costs less than separate visits. Include photos of each item.

Work for landlords and builders

We are used to working with agents and managing companies. Just send photos, the address and how to get access and we’ll arrange it.

Builders, developers and site managers book us for snagging repairs, putting right damage done during fitting. We hold CHAS, Constructionline and SafeContractor accreditations.

Should I try a DIY kit first?

If you do try a kit, read the instructions carefully, ensure the area is clean and completely dry, and do not use it until it has fully cured. If it fails, we can still put it right.

DIY kits are sold for most surfaces, and they can tidy up a tiny mark. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair will not last.

When a repair isn’t the answer

We’ll always be straight with you, so here’s what a repair will not do:

  • Gaps so wide they need filling or trims before sealing
  • A bath or tray that moves, until its support is fixed
  • Tiles that move, until they’re refixed

If in doubt, send photos and we will say what we think.

What we work on

  • Wet rooms
  • Basins & vanity units
  • Kitchen worktops & sinks
  • Baths
  • Shower trays & enclosures

Repairs by material

Shower trays

Trays are sealed with weight on them, for the same reason.

Sinks and worktops

Basins, vanity units and kitchen worktops are resealed too, with the joint fully dried first.

How the visit works

Visits start with a quick look at the job together, so you know exactly what we are doing. After that, protection goes down around the work area and the work begins. Allow about two hours for a bath, and we’ll tell you if anything changes.

  1. We cut out and remove all of the old sealant.
  2. Next we clean the joint and deal with mould.
  3. The joint is dried thoroughly.
  4. Baths are filled with water first, so the joint is at its widest.
  5. New mould-resistant silicone goes on and is tooled to a neat finish, including around the taps.

Before we arrive

  • Make sure the area is dry
  • Keep a parking space free if you can
  • Let us know if it has been repaired before

Getting a price

A quote takes minutes to ask for: take one close-up and one wider shot of the bath or shower, add your postcode and send them to us. What comes back is a fixed price, not a guess.

Send photos for a quote

Advice

What affects the price in Ettrickbridge

There’s no area surcharge for Ettrickbridge. The price reflects:

  • Any earlier repairs that need removing first
  • Access to the area
  • Unusual colours or finishes
  • The type of damage

Set against the cost of replacement, repairing typically costs far less, because there is no removal, plumbing or making good. Your fixed quote shows exactly what’s included.

Quotes from your pictures

You can typically get a fixed price without us visiting. To make it quick:

  • One sharp close-up of the damage
  • The material, if you know it
  • Daylight if possible, and no flash reflection
  • Details of any past repairs

There’s no need for us to visit first. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we will come back to you with a fixed figure.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.