Staffordshire · England

Bath Resealing in Fole

Bath resealing in and around Fole: photo quotes, tidy work and a year’s guarantee.

  • Gaps in the seal
  • Water getting behind the bath or tray
  • Missing sealant behind the taps
Surface Doctor technician refinishing the outside of a roll-top bath

Need bath resealing in Fole?

Covering Fole

Fole is about 3 miles north-west of Uttoxeter, in Staffordshire. We work in every kind of home, old or new, large or small, plus businesses and rented homes. Fole is one of 512 towns and villages in Staffordshire we cover. You can also see our page for Birmingham, about 32 miles away.

Every address in ST14 is within our area. Neighbouring places we cover include Checkley (1 mile west), Beamhurst (1 mile south-east), Hollington (1 mile north-east), Withington (2 miles south-west) and Church Leigh (2 miles south-west). Further out, we also cover Stafford (12 miles south-west), Newcastle-under-Lyme (14 miles north-west), Burton upon Trent (15 miles south-east), Longton (9 miles north-west), Rugeley (12 miles south) and Stone (9 miles west).

Local landmarks in Fole

We visit homes around St Mary's and All Saints' Church and Hutchinson Memorial CofE First School and the streets around them. Fole’s nearest station is Uttoxeter station, about 4.2 miles south-east of the centre. A little further out are Redfern's Cottage (3.8 miles south-east) and Alton Castle (3.6 miles north-east).

Map of Fole © OpenStreetMap contributors

Bath resealing in Fole without replacing anything

A proper reseal starts with removing every trace of the old silicone. Fresh sealant doesn’t stick to old, which is why many DIY jobs peel. Whether it’s an untidy old seal and mould you can’t clean out, we can usually put it right, whatever the material.

Your repair is guaranteed for a year, as with every job we do.

Roll-top bath being refinished by a Surface Doctor technician
Area
Fole (ST14)
Region
Staffordshire
Cover
A year, on every repair
Quote
Free and fixed, from your photos
Telephone
0345 017 0787
Page updated
23 October 2026

Your questions about bath resealing in Fole

What information do you need?

Some pictures, your postcode and how to reach you. On the day, we only need access to the room.

How quickly can you book me in?

It depends on the time of year and where you are. Send pictures with your postcode and we will reply with the earliest dates.

Is it OK to have pets in the house?

On the day, the room should be kept clear of pets and children.

Is there a guarantee?

Yes, for a year. If anything goes wrong with the repair within the year, we return to fix it.

What does bath resealing cost?

We give a fixed price from your pictures. Send a close-up and a picture of the whole item and your postcode.

What areas do you cover?

We cover the entire UK, including Fole and the rest of Staffordshire. Send your postcode with your pictures and we will offer you dates.

How long will it take?

A bath or shower typically takes a couple of hours. Leave it to cure before use.

Will it make a mess?

Dust sheets and masking go down before we start, and we clean up when we have finished.

What bath resealing costs

Each job gets its own fixed quote. This is what makes a difference:

  • Whether it’s a chip, crack, burn or wear
  • The material
  • Unusual colours or finishes
  • Any earlier repairs that need removing first

Most people are surprised how affordable a repair is, especially compared with replacing and refitting. Send photos and we’ll give you the exact figure.

Send pictures for a quote

It only takes a minute to photograph the damage. Please include:

  • A clear, close picture of the problem area
  • Any earlier repairs or coatings
  • Where you are, by postcode
  • Daylight if possible, and no flash reflection

Call 0345 017 0787 or use the quote form. With a clear picture of the damage and one of the entire bath or shower, we can give you a fixed price.

Repairs by material

Sinks and worktops

Basins, vanity units and kitchen worktops are resealed too, with the joint fully dried first.

Shower trays

We put weight on a tray before sealing it, so the joint is at its widest.

Honest limits

A repair is not always the answer, and we’ll tell you before we start. We cannot fix:

  • Gaps too big for silicone alone
  • Loose tiles, which need refixing first
  • Rotten walls or floors behind the bath

Send us pictures and we will tell you honestly.

Surfaces we repair

  • Baths
  • Wet rooms
  • Basins & vanity units
  • Kitchen worktops & sinks
  • Shower trays & enclosures

DIY kit or professional repair?

DIY kits are sold for most surfaces, and they can tidy up a tiny mark. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.

It’s tempting to reach for a kit, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Getting it right first time is typically cheaper.

The process

The work is clean and fairly quiet. Protection goes down first, then the work takes a couple of hours. At the end we talk you through the curing time and the aftercare.

  1. The old silicone is cut out completely.
  2. We remove the residue and clean the joint.
  3. Any mould is treated and the joint dried.
  4. We fill the bath, or weight the tray, to open the joint.
  5. We apply fresh mould-resistant silicone and tool a neat bead.

Before we arrive

  • Mention if the room is upstairs or in a flat
  • Keep a parking space free if you can
  • Plan for the room to be out of bounds to pets and children

Ask for a price

To get a price, send two or three photos through our quote form or call us. We will tell you honestly if a repair is the right fix.

Get a fixed quote

Related advice

Resealing in Fole: why it matters

Resealing is routine maintenance. Putting off a reseal can let water reach the walls and floor, which costs far more to put right. Instead of hourly rates, we price the whole job up front. Damage, material and access decide it, and doing several items at once reduces it.

Why book with us

  • CHAS, Constructionline and SafeContractor accredited
  • Fixed prices from your pictures
  • We leave the room as we found it
  • We come to you, anywhere in the UK

See our full price list.

For landlords and businesses

For developers and builders, we fix damage before handover. Several plots can be done in one visit.

We regularly price jobs from inventory or check-out pictures. You can have a price before you arrange access, and we can arrange access with the tenant directly if that helps.

Do you need bath resealing in Fole?

No sealant lasts for ever. Every bath or shower adds moisture and soap residue, which mould loves, and the joint flexes each time the bath fills.

You may need us if you’ve spotted any of these:

  • Discoloured, yellow sealant
  • Water getting behind the bath or tray
  • Black mould in the sealant
  • Gaps by the taps

Questions to ask before you book

  • What happens if the damage is worse than the pictures show
  • How your room will be protected
  • A fixed price, and whether VAT is included
  • Who will actually do the work

Our hiring checklist

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.