Staffordshire · England
Bath Resealing in Great Gate
Bath resealing for Great Gate, without a refit. Get a fixed price from your photos, then we come to you.
- Silicone smeared on tiles
- Silicone coming away from the tiles
- Unsealed corners

Bath resealing in Great Gate, done in place
We reseal baths with them filled with water, so the joint is at its widest, which stops the new seal tearing the first time the bath is used. If you are dealing with gaps by the taps and damp near the bath, we can typically put it right, whatever the material.
We guarantee the work for a year. If something isn’t right in that time, we come back and put it right.

- Area
- Great Gate (ST10)
- Region
- Staffordshire
- Warranty
- 12 months on all our work
- Quote
- Free, fixed price from pictures
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
Great Gate and the surrounding area
Great Gate is about 3 miles south-east of Cheadle, in Staffordshire. Our work suits any type of property, old or new, large or small, plus businesses and rented homes. We work in all 512 towns and villages in Staffordshire. You can also see our page for Birmingham, about 34 miles away.
Jobs in ST10 work the same way as everywhere else we cover. We also cover the places around Great Gate: Hollington (1 mile south), Fole (2 miles south), Checkley (2 miles south-west), Threapwood (2 miles north-west) and Beamhurst (2 miles south). Further out, we also cover Stafford (13 miles south-west), Newcastle-under-Lyme (14 miles west), Longton (9 miles west), Rugeley (14 miles south), Stone (10 miles south-west) and Leek (11 miles north-west).
Near you in Great Gate
Our customers here include homes close to The Raddle Inn and Church of St Giles, among other places. For rail, the closest station is Uttoxeter station, about 5 miles south-east. Nearby you will also find Alton Castle (1.8 miles north-east) and Cheadle Hospital (3.5 miles north-west). Open spaces near Great Gate include Cotton Dell.
Also near Great Gate
What else we do in Great Gate
Why it’s worth resealing in Great Gate
Resealing is a small job. Putting off a reseal can let water reach the walls and floor, and that damage costs much more to fix. Set against the cost of replacement, repairing typically costs far less, because nothing has to be taken out, refitted or made good. Your fixed quote shows exactly what’s included.
Why book with us
- Every repair guaranteed for a year
- Most jobs done in one visit
- CHAS, Constructionline and SafeContractor accredited
- Rooms protected and left tidy
Read our prices page.
How we price bath resealing
There’s no charge for travel to Great Gate. The price depends on:
- Previous DIY repairs that have to come out
- Whether it’s a chip, crack, burn or wear
- The size and number of damaged areas
- Whether we combine several jobs
Most people are surprised how affordable a repair is, particularly next to the cost of replacement. Photos let us give you the exact figure.
How to get a fixed quote
You can take the photos on your phone, there is no need for anything special. Ensure they show:
- Daylight if possible, and no flash reflection
- One picture of the whole bath or shower
- A coin beside the damage so we can judge size
- Any details about the material
No survey visit is needed: we price from photos. Use the quote form, or ring 0345 017 0787 to talk it through, and we will come back with a fixed figure.
Your questions about bath resealing in Great Gate
Can pets and children be at home?
Just keep them out of the work area. We will tell you when the room can be used again.
What if the damage is worse than the photos show?
The price is fixed for what the photos show. Anything extra is discussed before we begin.
Can you do more than one item on the same visit?
Yes. Combining jobs on one visit brings the cost down. Send photos of everything you’d like done.
Is it messy?
No. The work area is masked and covered, and we take our waste away with us.
How soon can you come?
That depends on our diary for your area. We’ll offer you dates when we send your quote.
Can new silicone go over old?
We always remove the old sealant completely. Fresh silicone does not stick to old.
Do you hold any accreditations?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
How do I book?
A close-up, a wider photo and your postcode. Then we’ll agree a date.
What we do, step by step
There’s not much you need to do on the day. Let us in and show us the room, and we will take it from there. The job generally runs to about two hours for a bath, tidy-up included.
- All the old sealant is cut out and removed.
- The joint is cleaned and any mould treated.
- We ensure the joint is completely dry.
- For a bath, we fill it with water first so the joint is at its widest.
- New mould-resistant silicone goes on and is tooled to a neat finish, taps included.
How to prepare
- Mention any earlier repairs or resurfacing
- Have somewhere for us to park nearby if possible
- Mention any parking restrictions or tricky access
How to get a price
Ring 0345 017 0787, or send us photos through the quote form. With a clear picture of the damage and one of the whole bath or shower, we can give you a fixed quote the same day in most cases.
Advice
Materials and what they mean for the repair
Sinks and worktops
We reseal basins, vanity tops and kitchen worktops, with the joint fully dried first.
Baths
We fill the bath before sealing, so the joint is at its widest.
Do you need bath resealing in Great Gate?
Black mould is the most common reason people reseal. It grows into the sealant itself, so cleaning cannot get it all out.
Contact us if you’ve noticed:
- An untidy old seal
- Silicone coming away from the tiles
- Stained silicone
- Gaps by the taps
What your quote should include
- What the guarantee covers, and for how long
- Is the price fixed, and does it include VAT?
- Whether the colour is mixed to match
- Whether cleaning and preparation are in the price
DIY kit or professional repair?
DIY kits are sold for most surfaces, and they can make a small mark look better. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair will not last.
It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is normally the cheaper route.
Keeping it looking good
It’s all simple stuff:
- Clean the joints with a mild cleaner
- Dry the seal after bathing
- Air the room after use
- Replace the seal when mould sets in
Use the extractor fan, dry the joints after bathing, and clean them regularly with a mild cleaner to slow mould growth.
Black mould in sealant is not just unsightly; it shows moisture is getting in. Resealing early keeps water out of the walls and floor.
Work for landlords and builders
If you manage property in Great Gate, we can repair and quote for several addresses together. Just send pictures for each address and we’ll price them together.
We’re used to working with agents and managing companies. Send the address, pictures and access details and we will arrange it.
About our accreditations · Every repair comes with a one-year guarantee.

