Pembrokeshire · Wales
Bath & shower resealing (mastic) in Freshwater East, Pembrokeshire
Bath, shower and sink resealing with new mould-resistant silicone in Freshwater East, carried out at your home and guaranteed for a year.
- Water getting behind the bath or tray
- Stained silicone
- Silicone smeared on tiles
Bath resealing in Freshwater East, done in place
We reseal baths with them filled with water, so the joint opens fully, so the seal doesn’t tear when the bath is first used. We work on shower trays & enclosures, kitchen worktops & sinks and wet rooms, and common reasons people contact us are a messy previous reseal and black mould in the sealant.
All our work is covered by our one-year guarantee, wherever you are in Pembrokeshire.
- Area
- Freshwater East (SA71)
- Area hub
- Pembrokeshire
- Warranty
- One year on every repair
- Quotes
- Free and fixed, from your pictures
- Call
- 0345 017 0787
- Updated
- 23 October 2026
Do you need bath resealing in Freshwater East?
Most reseals are because of black mould. It grows into the sealant itself, so cleaning can’t get it all out.
The most common problems we are called about are:
- Stained silicone
- Unsealed corners
- Silicone smeared on tiles
- Black spots in the silicone
Questions to ask before you book
- How the colour is matched
- Whether a trained technician does the job
- What protection goes down before work starts
- What prep work is covered
Work for landlords and builders
Builders use us to fix snagging damage before handover, saving last-minute replacements. We can visit several plots in one trip to keep costs down.
We carry out planned and one-off repairs for housing associations and facilities teams in Pembrokeshire and across the UK. A repair avoids taking out and refitting, which matters when someone is living in the home.
Covering Freshwater East
Freshwater East is about 9 miles south-east of Milford Haven, in Pembrokeshire. From the centre of Freshwater East to the outlying streets, we offer exactly the same service: fixed prices, tidy work and a one-year guarantee. We work in all 223 towns and villages in Pembrokeshire.
Jobs in SA71 are booked in the same way as anywhere else. Whether you live on Matchbox Lane, Jason Road and Chapel Lane or anywhere nearby, we can come to you. We also travel to East Trewent (1 mile south-west), Llandyfai (1 mile north), Manorbier Newton (2 miles north-east), Bishop's Park (2 miles north-west) and Jameston (2 miles east). Further out, we also cover Haverfordwest (11 miles north-west), Milford Haven (9 miles north-west), Pembroke (3 miles north-west), Pembroke Dock (4 miles north-west), The Marsh (11 miles north) and Dinbych-y-Pysgod (7 miles east).
Near you in Freshwater East
In Freshwater East, that means homes near Freshwater Inn, Hodgeston Parish Church and Lamphey C.P. School. Freshwater East’s nearest station is Lamphey station, roughly 1.3 miles north of the centre. Further afield, we also cover the area around Museum of The Home (3 miles north-west) and South Pembrokeshire Hospital (5 miles north-west). Open spaces near Freshwater East include Stackpole Estate and Pembroke River upper.
- Parks and local facilities nearby include Pembroke: St Mary South (2.8 miles north-west)
When we’d advise against a repair
A few problems are outside what a surface repair can do:
- Gaps too big for silicone alone
- Hidden water damage
- A flexing bath
Send us pictures and we’ll tell you honestly before you book.
What we work on
- Shower trays & enclosures
- Baths
- Wet rooms
- Basins & vanity units
- Kitchen worktops & sinks
What bath resealing costs
We price every job individually, from your pictures. What matters most is:
- Previous DIY repairs that have to come out
- Unusual colours or finishes
- Access to the area
- How many areas need work
Compared with replacing, a repair is normally a fraction of the price, because there’s no removal, plumbing or making good. The quote lists exactly what you are paying for.
Quotes from your photos
Photographing the damage takes a minute, and it saves a visit. Try to send:
- A wider photo showing the entire bath or shower
- The material, if you know it
- A coin beside the damage so we can judge size
- Your postcode, so we can check dates
For most jobs, photos are all we need to give you a price. Tell us what happened and where you are, and we will send back a fixed quote and some dates.
Can I fix it myself?
Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is usually the cheaper route.
DIY kits are sold for most surfaces, and they can make a small mark look better. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair won’t last.
Why reseal now?
Resealing is a small job. Putting off a reseal lets water get behind the bath or tray, which costs far more to put right. It helps to know what pushes a price up or down: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Photos let us give you a fixed figure.
Why Freshwater East customers choose us
- Usually one visit, start to finish
- Fixed prices from your photos
- Work done at your home or business
- No extra charge for your area
See our full price list.
Questions from Freshwater East
How long does resealing take?
Around two hours for a bath, plus curing time.
Will there be a smell?
It depends on the job, but frequently a little. Ventilation keeps it to a minimum, and it soon fades.
Can I get a quote without a visit?
Nearly always. We only ask to see it in person if the pictures can’t show what we need.
Will the price change on the day?
It’s rare, but if it happens we talk to you first. You decide whether to go ahead.
Why does the silicone keep cracking?
Movement is the usual cause. We fill the bath before sealing it.
What happens next?
We check the damage, the material and your postcode, then reply with a quote with dates.
Is it messy?
We protect the room with dust sheets and masking first, and we clean up when we have finished.
Are you a vetted contractor?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
How it works
Once we’re through the door, the aim is to do the job without disturbing the rest of your home. Surfaces nearby are masked off, the work takes a couple of hours, and we finish with a tidy-up and a look at the finished work together.
- All the old sealant is cut out and removed.
- The joint is cleaned and any mould treated.
- We make sure the joint is completely dry.
- Baths are filled with water first, so the joint is at its widest.
- We run a new bead of mould-resistant silicone and smooth it neatly, taps included.
Getting ready for the visit
- Clear the area around the damage
- Keep pets and children out of the room while we work
- Ensure the room can be ventilated
Getting a price
Getting a quote takes a couple of minutes: photograph the damage, then the entire bath or shower, add your postcode and send them over. What comes back is a fixed quote, not a guess.
Read more
Towns and villages near Freshwater East
More services for Freshwater East
Aftercare tips
Most damage we see is avoidable. A few tips:
- Air the room after use
- Clean the joints with a mild cleaner
- Ventilate the bathroom well
- Dry the seal after bathing
Good ventilation is the best protection, and wipe the joints after use so mould struggles to take hold.
Don’t wait until water gets behind the bath. Gaps or lifting edges mean it needs doing.
About our accreditations · Every repair comes with a one-year guarantee.
