Derbyshire · England
Bath Resealing for Froggatt homes
Bath, shower and sink resealing with new mould-resistant silicone for householders, landlords and businesses in Froggatt. Send pictures for a free, fixed quote.
- Discoloured, yellow sealant
- Gaps in the seal
- Missing sealant behind the taps

Common problems we fix in Froggatt
Even good sealant eventually discolours, especially in a busy family bathroom. Steam, soap and movement all wear it down.
The most common problems we’re called about are:
- Damp near the bath
- Unsealed corners
- Silicone coming away from the tiles
- Mould you cannot clean out
Comparing quotes
- A fixed price, and whether VAT is included
- What the guarantee covers, and for how long
- How the room is protected while they work
- How to care for the finish
How we handle bath resealing in Froggatt
We cut out all of the old sealant, treat any mould, and apply fresh mould-resistant silicone. We reseal baths, showers, sinks and worktops, and that includes the awkward spots behind the taps. Typical jobs include a messy previous reseal and missing sealant behind the taps, on basins & vanity units, kitchen worktops & sinks and wet rooms.
Every job is backed for twelve months, and the guarantee is the same wherever you live. If something goes wrong with the work, we come back.
- Where
- Froggatt (S32)
- County
- Derbyshire
- Guarantee
- A year, on every repair
- Quote
- Free and fixed, from your pictures
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026

DIY kit or professional repair?
It’s natural to want to try a repair yourself. The trouble is that kit repairs often look fine at first and then fail, and then the old filler has to be removed first.
If you do try a kit, read the instructions carefully and work on a clean, dry surface, and don’t use it until it has fully cured. If it fails, we can still put it right.
Honest limits
A repair isn’t always the answer, and we will tell you before we start. We cannot fix:
- Gaps too big for silicone alone
- Water damage behind the bath that needs a builder
- A bath or tray that moves, until its support is fixed
If in doubt, send photos and we will say what we think.
What we work on
- Wet rooms
- Kitchen worktops & sinks
- Baths
- Shower trays & enclosures
- Basins & vanity units
Also near Froggatt
More services for Froggatt
Is resealing worth it?
Resealing is a small job. Putting off a reseal lets water get behind the bath or tray, which costs far more to put right. No two jobs are quite the same, so each one is priced on its own. What’s damaged, how badly and how easy it is to reach all make a difference, and doing several things on one visit costs less than separate visits.
Why choose Surface Doctor in Froggatt
- We leave the room as we found it
- CHAS and Constructionline accredited
- No need to remove anything
- We come to you, anywhere in the UK
Read our full price list.
The process
We work cleanly and quietly, so you can stay at home while we are there. We protect the area first, then the work takes about two hours for a bath. Before we leave, we explain how soon it can be used and how to look after it.
- We cut out all of the old sealant.
- Residue is removed and the joint cleaned.
- Any mould is treated and the joint dried.
- The bath is filled with water, or weight put on the tray.
- We apply fresh mould-resistant silicone and tool a neat bead.
Getting ready for the visit
- Have a window or extractor fan available
- Let us know which floor the room is on
- Have somewhere for us to park nearby if possible
Get a quote
The quickest way to a price is to send a couple of photos through our quote form or ring us. We’ll tell you honestly whether it can be repaired.
Advice
Froggatt and the surrounding area
Froggatt is about 7 miles west of Dronfield, in Derbyshire. Across the S32 area, we carry out the work at your property. Froggatt is one of 532 places in Derbyshire we cover. You can also see our page for Manchester, about 28 miles away.
Every address in S32 is covered. Whether you live on The Green, Hollowgate and Moorlands Lane or a nearby road, we can come to you. We also travel to Stoke (1 mile north-west), Calver (1 mile south), Stoney Middleton (1 mile south-west), Curbar (1 mile south) and Grindleford (1 mile north). We also work in nearby towns such as Chesterfield (9 miles east), Buxton (12 miles west), Dronfield (7 miles east), Bolsover (15 miles east), Staveley (11 miles east) and Matlock (10 miles south).
Landmarks near Froggatt
Around Froggatt, we work in homes near Grindleford Primary School, Church of St Martin and The Chequers Inn and attached outbuildings. The closest station to Froggatt is Grindleford station, about 1.6 miles north. A little further out are David Mellor Design Museum (2.7 miles north) and Castle Hill (1 mile south-west). Green spaces nearby include Eyam Moor and Blacka Moor Nature Reserve.
Froggatt: your questions answered
Do you cover the whole of Derbyshire?
Everywhere in the UK, Froggatt included. There’s no extra charge for travel.
Will it make a mess?
No. The work area is masked and covered, and we leave the room clean.
How long does a reseal take?
Most reseals take about two hours. Leave it to cure before use.
Why does the silicone keep cracking?
Something is moving. Persistent splitting can mean the support needs attention.
What information do you need?
Send photos through the quote form or call 0345 017 0787, and we will take it from there.
Is it OK to have pets in the house?
Please keep children and pets out of the room during the visit. Everywhere else in the home is fine.
Can you repair something that’s been repaired before?
In most cases. We remove the old repair before doing a new one, so let us know about it.
When can you do it?
We’ll give you dates with your quote. If it’s urgent, say so and we will do what we can.
Different materials, different repairs
Sinks and worktops
Basins, vanity units and kitchen worktops are resealed too, with the joint fully dried first.
Baths
We fill the bath before sealing, to open the joint fully.
Aftercare tips
So the finish stays in good condition:
- Wipe the joints dry after use
- Store bottles on a shelf
- Clean the sealant gently and regularly
- Replace the seal when mould sets in
Let it cure fully before using the bath or shower, normally about a day.
Black mould in sealant isn’t just unsightly, it’s a sign moisture is sitting in the joint. Resealing early keeps water out of the walls and floor.
Prices and what affects them
You will not pay by the hour. The price depends on:
- The material and finish
- How easy the damage is to reach
- Doing more than one item at once
- How hard the colour is to match
We charge the same wherever you are, so there’s no premium for Froggatt. The job itself decides the price: the material, the amount of damage and how many items.
Send photos for a quote
Two or three clear photos are typically enough. Try to include:
- The material, if you know it
- Any earlier repairs or coatings
- A coin or ruler next to the damage for scale
- A clear, close picture of the problem area
For most jobs, photos are all we need to give you a price. Tell us what happened and where you are, and we’ll send back a fixed quote and some dates.
About our accreditations · Every repair comes with a one-year guarantee.

