Derbyshire · England
Bath & shower resealing (mastic) in Curbar, Derbyshire
Fixed-price bath resealing in Curbar and the surrounding area, done in a single visit in most cases and guaranteed for a year.
- Silicone smeared on tiles
- Gaps by the taps
- Black mould in the sealant
When a repair is not the answer
Not everything can be repaired, and we would rather say so up front. We can’t fix:
- A bath or tray that moves, until its support is fixed
- Hollow or loose tiles
- Very wide gaps that need a trim
Not sure? Send pictures and we will give you a straight answer.
Materials we work on in Curbar
- Wet rooms
- Kitchen worktops & sinks
- Basins & vanity units
- Shower trays & enclosures
- Baths
Bath resealing at your home in Curbar
Baths, trays, basins and kitchen worktops all get resealed, with mould-resistant sanitary silicone. A typical reseal takes a couple of hours, plus curing time. Common call-outs are for discoloured, yellow sealant and gaps in the seal, across basins & vanity units, baths and wet rooms.
You get a one-year guarantee, the same in Curbar as everywhere else we work.
- Where
- Curbar (S32)
- Region
- Derbyshire
- Warranty
- A year, on every repair
- Quotes
- Fixed and free, based on pictures
- Call
- 0345 017 0787
- Updated
- 23 October 2026
Also in Curbar
Covering Curbar
Curbar is about 7 miles west of Dronfield, in Derbyshire. Across the S32 area, a technician comes to you. Curbar is one of 532 towns and villages in Derbyshire we cover. Our jobs stretch from Curbar to Manchester (28 miles away).
Our technicians cover all of the S32 postcode area and the streets around it. We regularly work on streets such as Pinfold Hill, The Hillock and Curbar Hill. We also travel to Calver (1 mile west), Froggatt (1 mile north), Bubnell (1 mile south), Baslow (1 mile south) and Stoney Middleton (1 mile west). Within a short drive, we also cover Chesterfield (8 miles east), Buxton (12 miles west), Dronfield (7 miles east), Bolsover (14 miles east), Staveley (11 miles east) and Matlock (9 miles south).
Near you in Curbar
Typical jobs here are in homes near Curbar Primary School, All Saints' Church and The Eyre Arms and the streets around them. For rail, the closest station is Grindleford station, roughly 2.6 miles north of the centre. Well-known places in the area include Castle Hill (1.3 miles north-west) and David Mellor Design Museum (3.7 miles north). For a walk, there’s Blacka Moor Nature Reserve and Eyam Moor.
Common questions in Curbar
What do you need from me?
Use the quote form or ring 0345 017 0787, and we’ll take it from there.
Do you hold any accreditations?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
I rent my home. Can I book you?
We are happy to deal with the tenant, landlord or agent. Get your landlord’s agreement first.
How long will it take?
Most reseals take about two hours. Leave it to cure before use.
Do you charge for travel?
No. Our quotes include travel, with the same prices everywhere we work.
Can you redo someone else’s repair?
Most of the time. Tell us what was done before.
Why does the silicone keep cracking?
Something is moving. If it keeps happening, the support may need fixing.
Do you cover the entire of Derbyshire?
Across the UK, so Curbar is covered. Prices don’t change with location.
Why reseal now?
Compared with repairing water damage, resealing is cheap. It’s quick, tidy and protects your home. Compared with replacing, repairing typically costs far less, because there is no removal, plumbing or making good. Your fixed quote shows exactly what’s included.
Why Curbar clients choose us
- Honest advice, even when it means no job
- No extra charge for your area
- A year’s guarantee on all work
- CHAS and Constructionline accredited
See our full price list.
For landlords and businesses
Hotels, guest houses and holiday lets need rooms back in use quickly, so we keep visits short and tidy. We’ll fit around changeovers where we can.
Rented homes see more wear and tear, and replacing items every time a tenant leaves is expensive. Repairing between tenants keeps the property presentable for less.
Aftercare tips
A little care keeps the finish looking good. We recommend:
- Dry the seal after bathing
- Give the seal a regular clean
- Let steam out after showers
- Reseal when black spots won’t clean off
Avoid scraping the joints, and do not stand bottles on the seal.
Mouldy sealant is more than a cosmetic problem; it shows moisture is getting in. An early reseal keeps water where it belongs.
How we price bath resealing
Prices are worked out job by job. What matters most is:
- How easy the damage is to reach
- Unusual colours or finishes
- How much damage there is
- Whether old repairs or coatings need taking off
The price depends on the type and amount of damage, what it’s made of and how many jobs we combine into one visit. We give a fixed price from your pictures, so there are no surprises on the day.
How to get a fixed quote
Good pictures mean an accurate price. Here’s what helps:
- One picture of the whole bath or shower
- Details of any past repairs
- Your postcode, so we can check dates
- Good light, ideally daylight, without flash glare
For most jobs, photos are all we need to give you a price. Tell us what happened and where you are, and we will send back a fixed quote and some dates.
Different materials, different repairs
Baths
We fill the bath before sealing, so the joint is at its widest.
Shower trays
Trays are sealed with weight on them, so the joint is at its widest.
DIY repairs versus a professional job
You can buy a DIY kit for most repairs, and they can make a small mark look better. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.
A DIY attempt isn’t a disaster. We take the old repair out and do it properly, so it won’t stop us repairing it. Just mention it when you send pictures, as it can add time.
What we do, step by step
We work cleanly and quietly, so you can stay at home while we are there. Protection goes down first, then the work takes around two hours. At the end we talk you through how soon it can be used and how to care for it.
- First we strip out every bit of the old mastic.
- The joint is cleaned and any mould treated.
- The joint is dried thoroughly.
- For a bath, we fill it with water first so the joint is at its widest.
- We run a new bead of mould-resistant silicone and smooth it neatly, including around the taps.
Getting ready for the visit
- Let the surface dry out before the visit
- Clear toiletries, mats and anything else from around the area
- Have a window or extractor fan available
Get a quote
Call 0345 017 0787 or use the quote form. With one close-up and one wider picture, we can price the job the same day in most cases.
Read more
About our accreditations · Every repair comes with a one-year guarantee.
