Rhondda Cynon Taff · Wales
Bath Resealing in Glyntaff
Bath, shower and sink resealing with new mould-resistant silicone for homes and businesses in Glyntaff and across Rhondda Cynon Taff. Send photos for a free, fixed quote.
- Silicone smeared on tiles
- Sealant that’s split or lifting
- Water getting behind the bath or tray
How to look after the repair
To keep it looking its best:
- Air the room after use
- Keep bottles off the joints
- Dry the seal after bathing
- Run the extractor fan during and after showers
Do not scrape the sealant with anything sharp, and keep shampoo bottles off the joints.
If you notice damp, stains on the ceiling below or loose tiles, act quickly. It may be more than a reseal, so we’ll tell you if it needs a builder or plumber.
Bath resealing in Glyntaff, done in place
Baths are resealed with water in them, so the joint opens fully, which stops the new seal tearing the first time the bath is used. Typical jobs include an untidy old seal and sealant that’s split or lifting, on baths, kitchen worktops & sinks and shower trays & enclosures.
The work is covered for a year after we finish. Just call us if there is a problem and we will sort it.
- Area
- Glyntaff (CF37)
- Area hub
- Rhondda Cynon Taff
- Cover
- A year, on every repair
- Price
- Free and fixed, from your photos
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
Covering Glyntaff
Glyntaff is about 1 mile south-east of Pontypridd, in Rhondda Cynon Taff. Wherever you are in the CF37 postcode area, we carry out the work at your property. Glyntaff is one of 133 towns and villages in Rhondda Cynon Taff where we work.
Our visits in CF37 work the same way as everywhere else we cover. That includes homes on Wood Road, Gwaun Road and Forest Road. Glyntaff sits on or near the A470 and A4054, so getting to you is simple. If you’re just outside Glyntaff, we cover Pontypridd Town (1 mile north), Pontypridd (1 mile north-west), Treforest (1 mile south), Rhydyfelin (1 mile south-east) and Graig (1 mile west). Larger places within reach include Aberdare (10 miles north-west), Mountain Ash (6 miles north), Tonypandy (6 miles west), Rhondda (8 miles north-west), Porth (4 miles west) and Mountain Ash East (7 miles north).
Landmarks near Glyntaff
In Glyntaff, that means homes near Parclewis Primary School, Pick & Shovel pub and Cardinal Newman RC School, among other places. Also close by are St Mary's Church (less than half a mile north-east) and Ynysangharad Park (0.6 miles north-west). There’s a railway station in Glyntaff itself: Trefforest station. Further afield, we also cover the area around University of South Wales Art Collection Museum (0.6 miles south) and Crege Castle (4.3 miles south). Not far away are Cefn Eglwysilan.
DIY kit or professional repair?
A DIY attempt isn’t a disaster. We remove the old filler and start again, so it doesn’t stop a professional repair. Just mention it when you send photos, as it can add time.
If you do try a kit, read the instructions carefully and work on a clean, dry surface, and give it the full curing time. If it doesn’t work out, we can still repair it properly.
Landlord and trade work in Glyntaff
Hospitality businesses need rooms back in use quickly, so most of our work is done in a single visit. We will fit around changeovers where we can.
Rental properties take more wear, and replacing items every time a tenant leaves is expensive. Repairing between tenants keeps the property presentable for less.
Towns and villages near Glyntaff
More services for Glyntaff
Honest limits
We will always be straight with you, so here’s what a repair won’t do:
- A bath or tray that moves, until its support is fixed
- Tiles that move, until they’re refixed
- Gaps so wide they need filling or trims before sealing
Send us photos and we’ll tell you honestly before you book.
What we work on
- Wet rooms
- Shower trays & enclosures
- Basins & vanity units
- Baths
- Kitchen worktops & sinks
What we’re called out for in Glyntaff
No sealant lasts for ever. Every bath or shower adds moisture and soap residue, which mould loves, and the joint moves slightly every time the bath is filled.
Signs it’s time to call us include:
- Silicone coming away from the tiles
- Leaks at the edges
- Silicone smeared on tiles
- Mould you can’t clean out
What your quote should include
- When it can be used again
- If travel is included in the price
- How to care for the finish
- How the colour is matched
How it works
Arrival times are agreed in advance, so you know when to expect us. Once we’re there, the work takes about two hours for a bath. The room is left tidy and ready to use once it has cured.
- First we strip out every bit of the old mastic.
- The joint is cleaned and any mould treated.
- The joint is dried thoroughly.
- For a bath, we fill it with water first so the joint is at its widest.
- New mould-resistant silicone goes on and is tooled to a neat finish, including around the taps.
How to prepare
- Keep a parking space free if you can
- Ensure the room can be ventilated
- Tell us about parking, stairs or access
Getting a price
A quote takes minutes to ask for: take one close-up and one wider shot of the bath or shower, include your postcode and send them over. You will get a fixed price, not an estimate.
Read more
How we price bath resealing
We charge the same across the UK, including Glyntaff. The price reflects:
- The colour and finish to match
- What kind of damage it is
- Previous DIY repairs that have to come out
- Access to the area
Instead of hourly rates, we price the whole job up front. It depends on the damage, the material and access.
Send pictures for a quote
We price nearly every job from pictures. This is what we need:
- Daylight if possible, and no flash reflection
- The postcode, so we can plan the visit
- Something in shot to show the size
- One sharp close-up of the damage
For a price in Glyntaff, pictures are the quickest way: one close up, one from further back, plus your postcode. We reply with a fixed quote and our next available dates.
What your bath or shower is made of matters
Shower trays
Trays are sealed with weight on them, so the joint is at its widest.
Sinks and worktops
Basins, vanity units and kitchen worktops are resealed too, once the joint is completely dry.
Glyntaff questions
Do you do work for letting agents?
Yes, often. We quote for multiple addresses and fit around tenancy changeovers.
What if the damage is worse than the photos show?
Your quote covers the damage in the pictures. If there’s more, we will tell you before starting.
Is a repair better than a new one?
Normally, if the item is otherwise sound. Repairing avoids the cost and disruption of replacing. If replacing would be better, we’ll say so.
Why does my sealant keep splitting?
Generally because the bath or tray moves, or it was sealed with the bath empty. We seal baths full of water.
Is there a call-out fee?
We don’t add a call-out fee. Your fixed price includes everything.
What happens after I send photos?
We review the pictures and send a fixed quote and the next dates we have.
Can you redo someone else’s repair?
Yes, regularly. Removing the old work can add time, and that’s in the quote.
Why does my sealant keep going mouldy?
Mostly moisture and poor ventilation. Mould-resistant silicone and good ventilation help.
About our accreditations · Every repair comes with a one-year guarantee.
