Lancashire · England

Bath Resealing for Gregson Lane homes

Bath, shower and sink resealing with new mould-resistant silicone for homeowners, landlords and businesses in Gregson Lane. Send pictures for a free, fixed quote.

  • Silicone coming away from the tiles
  • Unsealed corners
  • Discoloured, yellow sealant
Surface Doctor technician refinishing the outside of a roll-top bath

Trusted bath resealing in Gregson Lane

About our bath resealing in Gregson Lane

All of the old sealant is cut out, deal with any mould, and apply fresh mould-resistant silicone. We reseal baths, showers, sinks and worktops, including the awkward bits behind the taps. We are often asked to fix an untidy old seal and missing sealant behind the taps, on basins & vanity units, shower trays & enclosures and wet rooms.

We guarantee the work for a year. If there’s a problem with the repair within the year, we return and sort it.

Roll-top bath being refinished by a Surface Doctor technician
Location
Gregson Lane (PR5)
Region
Lancashire
Guarantee
One year on every repair
Price
Free and fixed, from your photos
Call
0345 017 0787
Last updated
23 October 2026

Keeping it looking good

Most damage we see is avoidable. These habits help:

  • Do not stand toiletries on the seal
  • Wipe the joints dry after use
  • Let steam out after showers
  • Clean the joints with a mild cleaner

Avoid scraping the joints, and do not stand bottles on the seal.

If you notice damp, stains on the ceiling below or loose tiles, act quickly. There may be more going on, and we will say if you need a builder or plumber.

Honest limits

We’ll always be straight with you, so here’s what a repair can’t fix:

  • Very wide gaps that need a trim
  • A flexing bath
  • Tiles that move, until they’re refixed

If in doubt, send pictures and we’ll say what we think.

What we work on

  • Wet rooms
  • Baths
  • Shower trays & enclosures
  • Kitchen worktops & sinks
  • Basins & vanity units

What happens on the day

Your technician turns up when we said we would and looks over the damage before anything else. The floor and nearby surfaces are covered before any work starts. The work itself takes about two hours for a bath, and the room is left clean and tidy.

  1. We cut out all of the old sealant.
  2. We remove the residue and clean the joint.
  3. We treat mould and dry the joint thoroughly.
  4. The bath is filled with water, or weight put on the tray.
  5. New mould-resistant silicone is applied and tooled neatly.

How to prepare

  • Move bottles, mats and clutter away from the area
  • Open a window if you can
  • Mention if the room is upstairs or in a flat

How to get a price

A quote takes minutes to ask for: photograph the damage, then the entire bath or shower, include your postcode and send them to us. You will get a fixed price, not an estimate.

Get a fixed price

Read more

What your bath or shower is made of matters

Sinks and worktops

Basins, vanity units and kitchen worktops are resealed too, once the joint is completely dry.

Shower trays

Trays are sealed with weight on them, so the joint is at its widest.

Should I try a DIY kit first?

A DIY attempt isn’t a disaster. We take the old repair out and do it properly, so it does not stop a professional repair. It does add a little time, so tell us about it when you send photos.

For a hairline mark somewhere you’ll never see, a kit may be enough. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.

When to call us in Gregson Lane

In time, even good sealant discolours. Steam, soap and movement all take their toll.

Signs it’s time to call us include:

  • Leaks at the edges
  • Gaps by the taps
  • Silicone coming away from the tiles
  • Mould you can’t clean out

Comparing quotes

  • What happens if the damage is worse than the pictures show
  • How long the guarantee is and what it covers
  • How your room will be protected
  • Whether there are any call-out or travel charges

10 questions to ask before booking

Where we work around Gregson Lane

Gregson Lane is about 2 miles east of Bamber Bridge, in Lancashire. Our work suits any type of property, old or new, large or small, as well as offices, shops and holiday lets. Gregson Lane is one of 482 towns and villages in Lancashire we cover. You can also see our page for Manchester, about 24 miles away.

We cover every part of PR5 and the streets around it. That includes homes on Larch Gate, Alma Row and Gregson Lane and the roads around them. We also cover the places around Gregson Lane: Coupe Green (1 mile north), Jack Green (1 mile south-east), Higher Walton (1 mile north-west), Pippin Street (1 mile south) and Roach Bridge (1 mile north). Within a short drive, we also cover Preston (4 miles north-west), Chorley (6 miles south), Accrington (11 miles east), Leyland (4 miles south-west), Fulwood (5 miles north-west) and Rawtenstall (14 miles east).

Around Gregson Lane

Around Gregson Lane, we work in homes near The Oak pub, Roman Catholic Church of St Joseph and Walton-le-Dale High School and the streets around them. Nearby too are Hoghton Tower park (1.8 miles east) and Brindle Gregson Lane Primary School (within half a mile south-east). The nearest railway station is Bamber Bridge station, about 1.7 miles west of the centre. A little further out are Penwortham Castle (4.4 miles west) and South Ribble Museum (0.5 miles north). The countryside around Gregson Lane includes Brockholes.

Map of Gregson Lane © OpenStreetMap contributors

Why it’s worth resealing in Gregson Lane

A professional reseal costs little compared with water damage. It’s a quick job that protects your walls and floors. We charge the same wherever you are, with no extra for Gregson Lane. The job itself decides the price: the material, the amount of damage and how many items.

Why book with us

  • Work done at your home or business
  • Every repair guaranteed for a year
  • No need to remove anything
  • Free fixed quotes from pictures

Read our prices page.

Prices and what affects them

Prices are worked out job by job, from your pictures. What matters most is:

  • How many items we do on one visit
  • Where the damage is and how we get to it
  • Any earlier repairs that need removing first
  • How much damage there is

Instead of hourly rates, we fix the price before we start. Damage, material and access decide it, and combining items on one visit brings it down.

Send photos for a quote

You can generally get a fixed quote without us visiting. To make it quick:

  • One picture of the entire bath or shower
  • A coin or ruler next to the damage for scale
  • A close-up of the damage, in focus
  • Any earlier repairs or coatings

The quickest way to a price is to send two or three photos using our quote form or call us. We will say immediately if a repair is the right fix.

Common questions in Gregson Lane

When can I use the bath after resealing?

You will get the curing time from us, usually around a day.

Is repairing better than replacing?

Usually, if the item is otherwise sound. A repair avoids removal and making good. If replacing would be better, we’ll say so.

How do I get a price for bath resealing in Gregson Lane?

Because every job differs, we price from pictures. You know the full cost before anything is booked.

Is there a call-out fee?

There is no separate call-out charge. The fixed quote covers the visit and the work.

How long will it take?

A bath or shower generally takes a couple of hours. It then needs time to cure.

Why does mould come back so fast?

Mould needs moisture. Run the fan, dry the joints and the new seal stays cleaner for longer.

My seal keeps tearing. Why?

Something is moving. Persistent splitting can mean the support needs attention.

Do you work for landlords and businesses?

Yes. We carry out repairs for homeowners, landlords, letting agents, builders and businesses in Gregson Lane.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.