Shropshire · England
Bath Resealing for Grindleforge homes
We travel to Grindleforge for bath, shower and sink resealing with new mould-resistant silicone. Nothing is taken out, and the work is guaranteed.
- Unsealed corners
- An untidy old seal
- Black spots in the silicone
FAQs for Grindleforge
How long will it take?
A bath or shower generally takes a couple of hours. It then needs time to cure.
Do you do work for letting agents?
Yes. We work for landlords, agents, builders and businesses as well as householders across Shropshire.
Which areas do you work in?
We work UK-wide, and that includes Grindleforge. Our prices are the same everywhere.
How quickly can you book me in?
That depends on our diary for your area. We’ll offer you dates when we send your quote.
Can you quote from photos?
In nearly every case. If pictures don’t show enough, we will ask for another angle.
What happens once I’ve sent photos?
We come back with a fixed quote, plus dates. There’s no obligation to book.
Will it make a mess?
No. The work area is masked and covered, and we leave the room clean.
Can pets and children be at home?
We ask you to keep children and pets out of the room while we work and until it has cured. The rest of the house is unaffected.
Bath resealing in Grindleforge without replacing anything
Preparation is everything in a reseal: old silicone removed, mould treated, the joint cleaned and dried. Then the fresh sealant goes on, as one neat, continuous bead. If you are dealing with gaps by the taps and gaps in the seal, we can normally put it right, on shower trays & enclosures, wet rooms and kitchen worktops & sinks alike.
A one-year guarantee comes with the work, just as it does everywhere we cover.
- Location
- Grindleforge (TF11)
- Area hub
- Shropshire
- Guarantee
- A year, on every repair
- Quote
- Fixed and free, based on pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
For landlords and businesses
Builders, developers and site managers book us for snagging repairs, fixing chips and scratches before handover. We hold CHAS, Constructionline and SafeContractor accreditations.
We regularly work with letting and managing agents. Just send pictures, the address and how to get access.
Looking after it afterwards
Most damage we see is avoidable. These habits help:
- Use the extractor fan
- Reseal when black spots will not clean off
- Give the seal a regular clean
- Open a window after bathing
Leave the sealant to cure for the time we give you, usually around 24 hours.
Don’t wait until water gets behind the bath. Split or lifting sealant is a sign it’s time.
Why it’s worth resealing in Grindleforge
Resealing costs very little, and it protects everything around the bath. Leaving failed sealant can let water cause damage that costs far more to fix. No two jobs are quite the same, so each one is priced on its own. The size and type of damage, the material and access all make a difference, and doing several things on one visit costs less than separate visits.
What you get with us
- Repair technicians who travel to you, UK-wide
- Dust sheets down, tidy finish
- We’ll tell you if it’s not worth repairing
- Same prices wherever you are
See our prices page.
Common problems we fix in Grindleforge
Even good sealant eventually discolours, especially in a busy family bathroom. Steam, soap and movement all wear it down.
You may need us if you’ve spotted:
- Water getting behind the bath or tray
- Stained silicone
- Silicone coming away from the tiles
- Black spots in the silicone
Questions to ask before you book
- When it can be used again
- How changes to the job are handled
- What aftercare is recommended
- What the guarantee covers, and for how long
What bath resealing costs
A fixed quote means you know the cost before booking. We take into account:
- How much damage there is
- Where the damage is and how we get to it
- The material
- The colour and finish to match
Our prices are the same across the UK, so there is no premium for Grindleforge. The job itself decides the price: the material, the amount of damage and how many items.
Getting a price from photos
You can take the photos on your phone. Just ensure we can see:
- Good light, ideally daylight, without flash glare
- A clear, close picture of the problem area
- A picture taken from further back
- Whether it’s been repaired or coated before
You don’t need a survey visit. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we will reply with a fixed price.
What we can’t put right
A repair is not right for every job, including:
- A flexing bath
- Hollow or loose tiles
- Rotten walls or floors behind the bath
Send us photos and we will tell you honestly.
Materials we work on in Grindleforge
- Baths
- Basins & vanity units
- Kitchen worktops & sinks
- Shower trays & enclosures
- Wet rooms
Covering Grindleforge
Grindleforge is about 6 miles south-east of Telford, in Shropshire. We agree a date that works for you, and we will give you an arrival time in advance, so there is no waiting around. Our repair technicians cover 433 places across Shropshire, from the larger towns to small villages. We work right across the region, from Grindleforge to Birmingham (about 23 miles away).
Here we cover the TF11 postcode area. We also cover the places around Grindleforge: Grindle (1 mile south), Ryton (1 mile south-east), Kemberton (1 mile north-west), Beckbury (1 mile south-east) and Shifnal (3 miles north). Further out, we also cover Madeley (3 miles west), Bridgnorth (7 miles south), Broseley (5 miles west), Albrighton (4 miles east), Much Wenlock (8 miles west) and Highley (12 miles south).
Local landmarks in Grindleforge
Our customers here include homes close to St Andrew's Church and the streets around them. The closest station to Grindleforge is Shifnal station, roughly 2.6 miles north. Other landmarks nearby include Museum of The Post Office In The Community (3.5 miles west) and RAF Hospital Cosford (3.6 miles north-east).
What happens on the day
A typical visit goes like this: we arrive at the agreed slot, sheet and mask the area around the job, do the job and clear up. Allow around two hours from start to finish. Before we go, we will explain how long to leave it and how to care for it.
- We protect the area and mask the joint lines.
- We remove the old sealant and every trace of residue.
- The joint is cleaned, treated and dried.
- Fresh silicone is applied in a continuous bead.
- We smooth the bead, remove the tape and leave it to cure.
Preparing for the visit
- Tell us about parking, stairs or access
- Keep a parking space free if you can
- Let us know which floor the room is on
How to get a price
Getting a price is easy: snap the damage close up and then the entire item, send them over with your postcode, and you’ll get a fixed price back. There’s no charge for the quote and you’re under no obligation.
Related advice
DIY kit or professional repair?
If you do try a kit, read the instructions carefully and work on a clean, dry surface, and give it the full curing time. If it fails, we can still put it right.
You can buy a DIY kit for most repairs, and they can tidy up a tiny mark. The trouble is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair won’t last.
More services for Grindleforge
About our accreditations · Every repair comes with a one-year guarantee.
