Surrey · England
Bath & shower resealing (mastic) in Hale, Surrey
Bath resealing in Hale without the cost of replacing. Get a fixed quote from your photos, then book a visit.
- Leaks at the edges
- Gaps by the taps
- An untidy old seal
Hale questions
Will there be a smell?
A little, depending on the job. Open windows and an extractor fan help, and it soon fades.
Is a repair better than a new one?
In most cases, yes. A repair skips the removal, fitting and redecorating. If it isn’t worth repairing, we will tell you.
Does someone need to be in?
We need someone to let us in. You do not need to watch us work.
How long will it take?
A bath or shower generally takes a couple of hours. It then needs time to cure.
What information do you need?
Send pictures through the quote form or call 0345 017 0787, and we’ll take it from there.
When can I use the bath after resealing?
We will give you the curing time, typically around a day.
Can I add another job to the visit?
Yes. Combining jobs on one visit brings the cost down. Send pictures of everything you’d like done.
What happens next?
We look at the photos and reply with a fixed quote and some dates. If we need another angle, we will ask.
About our bath resealing in Hale
All of the old sealant is cut out, treat any mould, and apply fresh mould-resistant silicone. We do this for baths, showers, sinks and worktops, and that includes the awkward spots behind the taps. If you’re dealing with black mould in the sealant and discoloured, yellow sealant, we can normally put it right.
You get a one-year guarantee, the same in Hale as everywhere else we work.
- Area
- Hale (GU9)
- Area hub
- Surrey
- Warranty
- A year, on every repair
- Price
- Fixed and free, based on pictures
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
Also near Hale
Also in Hale
The process
Visits start with a quick look at the job together, so you know exactly what we’re doing. Then the area is sheeted and masked and the work begins. Allow around two hours, and we’ll keep you posted as we go.
- First we strip out every bit of the old mastic.
- Next we clean the joint and deal with mould.
- The joint is dried thoroughly.
- For a bath, we fill it with water first so the joint is at its widest.
- We run a new bead of mould-resistant silicone and smooth it neatly, taps included.
How to prepare
- Make sure the area is dry
- Mention any earlier repairs or resurfacing
- Clear toiletries, mats and anything else from around the area
Get a quote
A quote takes minutes to ask for: photograph the damage, then the whole bath or shower, add your postcode and send them to us. What comes back is a fixed quote, not a guess.
Advice
Repairs by material
Shower trays
Trays are sealed with weight on them, for the same reason.
Baths
We fill the bath before sealing, so the joint is at its widest.
Looking after it afterwards
A little care keeps the finish looking good. We recommend:
- Wipe the joints dry after use
- Clean the sealant gently and regularly
- Open a window after bathing
- Ventilate the bathroom well
Let it cure fully before using the bath or shower, normally about a day.
Reseal before water gets in. Gaps or lifting edges mean it needs doing.
Our work in Hale
Hale is about 1 mile north of Farnham, in Surrey. Book a date that suits you, and we will give you an arrival time in advance, so there is no waiting around. We work in all 395 towns and villages across Surrey. Our jobs stretch from Hale to London (about 35 miles away).
Our technicians cover all of GU9 and the streets around it. We regularly work on streets such as Fairview Gardens, Farnborough Road and White Cottage Close and the roads around them. Neighbouring places we cover include Heath End (1 mile north), Weybourne (1 mile north-east), Upper Hale (1 mile north-west), Badshot Lea (1 mile east) and Farnham (1 mile south). Larger places within reach include Guildford (9 miles east), Woking (11 miles north-east), Camberley (8 miles north), Frimley (6 miles north), Haslemere (10 miles south) and Cranleigh (15 miles south-east).
Near you in Hale
Our clients here include homes close to The Church of St John the Evangelist, William Cobbett Primary School and Weybourne LNR, among other places. Also close by are Prince Consort's Library (1.8 miles north), Farnham Heath End School (less than half a mile north-east) and The Six Bells pub (0.5 miles south). Hale’s nearest station is Farnham station, roughly 1.3 miles south. Nearby you’ll also find Museum of Farnham (1.4 miles south-west) and Fleet Community Hospital (4.8 miles north-west). For a walk, there’s Farnham Park and Aunt's Pool.
- Other local spots include Seale and Tongham (2.7 miles east)
Should I try a DIY kit first?
The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.
DIY kits are sold for most surfaces, and they can tidy up a tiny mark. The trouble is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair will not last.
When to call us in Hale
Sealant doesn’t last forever. Every bath or shower adds moisture and soap residue, which mould loves, and the joint flexes each time the bath fills.
Signs it’s time to call us include:
- Silicone smeared on tiles
- Old sealant that looks dirty
- Sealant that’s split or lifting
- Black spots in the silicone
Before booking anyone
- Whether they match the colour on site
- How long it needs to cure
- What the guarantee covers, and for how long
- How changes to the job are handled
What affects the price in Hale
Each job gets its own fixed price. These are the things that affect it:
- What kind of damage it is
- The material and finish
- The colour and finish to match
- How much damage there is
Every job is a little different, so we price each one individually. What’s damaged, how badly and how easy it is to reach all play a part, and combining jobs on one visit brings the cost down.
How to get a fixed price
You can typically get a fixed quote without us visiting. To help us price it:
- The postcode, so we can plan the visit
- Whether it’s been repaired or coated before
- Any details about the material
- Natural light rather than flash
If you’re in Hale and want a price, the easiest route is pictures: a close-up, a wider shot and your postcode. We reply with a fixed quote and our next available dates.
Honest limits
A few problems are outside what a surface repair can do:
- Water damage behind the bath that needs a builder
- Hollow or loose tiles
- Gaps too big for silicone alone
Send us photos and we’ll tell you honestly.
Materials we work on in Hale
- Kitchen worktops & sinks
- Baths
- Basins & vanity units
- Shower trays & enclosures
- Wet rooms
Resealing in Hale: why it matters
Sealing over old silicone is a false economy. It soon peels, and mould stays trapped behind it. We remove the old sealant completely. Set against the cost of replacement, a repair is usually a fraction of the price, because there’s no removal, plumbing or making good. Your fixed quote shows exactly what’s included.
Why Hale customers choose us
- We will tell you if it’s not worth repairing
- A fixed quote before booking
- CHAS, Constructionline and SafeContractor accredited
- No extra charge for your area
Take a look at our prices page.
About our accreditations · Every repair comes with a one-year guarantee.
