Tameside · England
Bath & shower resealing (mastic) in Hattersley, Tameside
Bath, shower and sink resealing with new mould-resistant silicone for householders, landlords and businesses in Hattersley. Free, fixed quotes from your photos.
- Gaps in the seal
- Damp near the bath
- Old sealant that looks dirty
Bath resealing in Hattersley, done in place
Preparation is everything in a reseal: every bit of old silicone out, mould treated, the joint clean and dry. Then the fresh sealant goes on, in a neat, continuous bead. We’re frequently asked to fix water getting behind the bath or tray and sealant that’s split or lifting, on wet rooms, baths and kitchen worktops & sinks.
Your repair is guaranteed for a year, as with every job we do.
- Area
- Hattersley (SK14)
- Area hub
- Tameside
- Warranty
- A year, on every repair
- Quotes
- Free, fixed price from pictures
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
Landlords, agents and businesses in Hattersley
Letting agents frequently send us pictures straight from the inventory. You can have a price before you arrange access, and we can arrange access with the tenant directly if that helps.
Housing associations and facilities teams use us for planned and reactive repairs. Repairing in place avoids the disruption of a replacement, which is easier on the people living there.
How to look after the repair
A little care keeps the finish looking good. Our advice:
- Do not stand toiletries on the seal
- Reseal at the first sign of lifting
- Open a window after bathing
- Run the extractor fan during and after showers
Run the extractor fan, wipe the joints dry after use, and clean them regularly with a mild cleaner to slow mould growth.
Black mould in sealant isn’t just unsightly, it’s a sign moisture is sitting in the joint. An early reseal keeps water where it belongs.
DIY repairs versus a professional job
The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.
If you do try a kit, read the instructions carefully and work on a clean, dry surface, and give it the full curing time. If it does not work out, we can still repair it properly.
Where we work around Hattersley
Hattersley is about 2 miles east of Hyde, in Tameside. Jobs in Hattersley are booked in like any other job: a fixed price from your pictures, and a technician at your door on the day. Hattersley is one of 32 places in Tameside we cover. You can also see our page for Manchester, about 8 miles away.
Every address in SK14 is within our area, from the main roads to the quietest streets. Streets in the area include Great Field Road, Sgt Mark Stansfield Way and Lime Field. Nearby, we also work in Mottram in Longdendale (1 mile north-east), Broadbottom (1 mile south-east), Matley (1 mile north), The Hague (1 mile east) and Woodseats (2 miles south-east). Further out, we also cover Ashton-under-Lyne (4 miles north-west), Denton (3 miles west), Stalybridge (3 miles north), Droylsden (5 miles north-west), Dukinfield (3 miles north-west) and Audenshaw (4 miles north-west).
What’s near Hattersley
Locally, our jobs take us to homes close to Hyde Park, St Barnabas and Godley Hall Public House and the streets around them. You will also find St James Catholic Primary School (within half a mile north) and Alder Community High School (1.2 miles south-west). There is a railway station in Hattersley itself: Hattersley station. Other landmarks nearby include Portland Basin Museum (3.6 miles north-west) and Clarendon Square Shopping Centre (1.8 miles west). Green spaces nearby include Eastwood Nature Reserve and Werneth Low.
- Other local spots include Hyde Godley (0.9 miles west)
What we do, step by step
When we visit, we arrive at the time we have agreed, cover the area with dust sheets and masking, and set to work. The job normally takes about two hours for a bath. We clean up when we are done and tell you when it’s ready to use.
- The surrounding area is protected and the joints masked.
- We remove the old sealant and every trace of residue.
- The joint is cleaned, treated and dried.
- We run a continuous bead of new silicone.
- We smooth the bead, remove the tape and leave it to cure.
Getting ready for the visit
- Point us to the nearest place to park
- Ensure the room can be ventilated
- Tell us about any previous repairs or coatings
How to get a price
Getting a quote takes a couple of minutes: photograph the damage, then the whole bath or shower, add your postcode and send them over. You will get a fixed quote, not an estimate.
Advice
When we’d advise against a repair
Honesty matters more than a booking, so here’s what a repair won’t do:
- A bath or tray that moves, until its support is fixed
- Gaps too big for silicone alone
- Hollow or loose tiles
Not sure? Send pictures and we will give you a straight answer.
What we work on
- Kitchen worktops & sinks
- Basins & vanity units
- Baths
- Wet rooms
- Shower trays & enclosures
How we price bath resealing
You will not pay by the hour. The price is based on:
- Any earlier repairs that need removing first
- The size and number of damaged areas
- The material
- Whether it’s a chip, crack, burn or wear
Rather than charging by the hour, we fix the price before we start. Damage, material and access decide it, and doing several items at once reduces it.
Quotes from your photos
You can take the pictures on your phone. Just ensure we can see:
- Any details about the material
- Whether it’s been repaired or coated before
- Something in shot to show the size
- A wider photo showing the whole bath or shower
To get a price, send two or three photos using our quote form or ring us. We will say immediately if a repair is the right fix.
Hattersley questions
Is the work guaranteed?
All our work carries a one-year guarantee. We will explain what it covers when we quote.
Can I add another job to the visit?
Yes. Combining jobs on one visit brings the cost down. Include pictures of each item.
How long does a reseal take?
A bath or shower generally takes a couple of hours. It then needs time to cure.
Do you seal over the old sealant?
Never over old. The old sealant is cut out and the joint cleaned and dried.
Do you cover Hattersley?
We do. We send a technician to Hattersley for every job, and the price is the same as everywhere else.
Will the price change on the day?
The price is fixed for what the photos show. If there is more, we will tell you before starting.
How long does silicone take to cure?
You will get the curing time from us.
Will there be a smell?
There can be some smell while we work, so we ventilate the room. It fades as everything cures.
When to call us in Hattersley
A bathroom without good ventilation is hard on sealant: damp hangs around, and mould grows faster.
It’s worth getting a quote if you see:
- Black spots in the silicone
- Damp near the bath
- Gaps by the taps
- Sealant that is split or lifting
What your quote should include
- Whether cleaning and preparation are in the price
- How long it needs to cure
- What the guarantee covers, and for how long
- Is the price fixed, and does it include VAT?
Nearby places to Hattersley
Also in Hattersley
Different materials, different repairs
Shower trays
Trays are sealed with weight on them, for the same reason.
Sinks and worktops
We reseal basins, vanity tops and kitchen worktops, with the joint fully dried first.
About our accreditations · Every repair comes with a one-year guarantee.
