Devon · England

Bath Resealing for High Bray homes

Bath resealing for High Bray, without a refit. Send us photos for a fixed quote, then we come to you.

  • Leaks at the edges
  • Mould you can’t clean out
  • An untidy old seal
Surface Doctor technician refinishing the outside of a roll-top bath

Bath resealing in High Bray

Bath resealing in High Bray, done in place

We cut out all of the old sealant, treat any mould, and apply fresh mould-resistant silicone. We reseal baths, showers, sinks and worktops, including the awkward bits behind the taps. We regularly repair wet rooms, shower trays & enclosures and basins & vanity units, and people most frequently call us about mould you can’t clean out and gaps by the taps.

Peace of mind is built in: our one-year guarantee applies to every job, and we will explain exactly what it covers when we quote.

Area
High Bray (EX32)
Area hub
Devon
Cover
A year, on every repair
Price
Fixed and free, based on pictures
Phone
0345 017 0787
Last updated
23 October 2026
Technician in a mask working on a freestanding roll-top bath

About High Bray

High Bray is about 8 miles east of Newport, in Devon. Whether you are in the middle of High Bray or on the outskirts, we offer exactly the same service: a fixed quote, a tidy visit and a guarantee. We cover 586 places across Devon.

Every address in EX32 is covered. We regularly work on streets such as Mill Lane and Littlebray Lane and the roads around them. Close by, we cover Brayford (1 mile north), Charles (1 mile south), East Buckland (2 miles south-west), Benton (2 miles north-west) and West Buckland (3 miles south-west). Further out, we also cover Barnstaple (8 miles west), Ilfracombe (13 miles north-west), Braunton (13 miles west), Newport (8 miles west), South Molton (5 miles south) and Roundswell (10 miles west).

Landmarks near High Bray

Locally, our jobs take us to homes close to Church of All Saints and Brayford Academy and the streets around them. Further afield, we also cover the area around South Molton Hospital (5.4 miles south) and Bratton Fleming Mound (3.6 miles north-west). Open spaces near High Bray include Five Burrows Hill.

Map of High Bray © OpenStreetMap contributors

Aftercare tips

Once the work has cured, treat it gently:

  • Dry the seal after bathing
  • Keep bottles off the joints
  • Give the seal a regular clean
  • Run the extractor fan during and after showers

Use the extractor fan, wipe the joints dry after use, and give them a regular clean with a mild cleaner to slow mould growth.

Damp below or loose tiles need checking quickly. There may be more going on, and we will say if you need a builder or plumber.

High Bray questions

Can you repair something that is been repaired before?

Yes, we frequently do. Removing the old work can add time, and that is in the quote.

Can tenants book a repair?

Yes. Ask your landlord first, and we can send them the quote if that helps.

Do I have to be there?

Yes. The technician needs access to the room for the visit, at a time we agree with you.

Are you accredited?

Yes, including CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.

Do you come to High Bray?

Yes. We work across the UK and travel to High Bray. Send pictures and we’ll quote, or call 0345 017 0787.

What happens if you find more damage?

We’ll show you and explain before doing anything extra. Nothing extra is done without your say-so.

Are there extra charges for High Bray?

Travel is included in the price, and we charge the same wherever you are.

What happens next?

You’ll get a fixed quote back. You’re under no obligation.

What a repair can’t fix

Before you book, it’s worth knowing the limits:

  • Very wide gaps that need a trim
  • A bath or tray that moves, until its support is fixed
  • Tiles that move, until they’re refixed

Not sure? Send photos and we will give you a straight answer.

What we work on

  • Basins & vanity units
  • Baths
  • Shower trays & enclosures
  • Wet rooms
  • Kitchen worktops & sinks

Can I fix it myself?

The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.

DIY kits are sold for most surfaces, and they can make a small mark look better. The trouble is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair won’t last.

What affects the price in High Bray

You won’t pay by the hour. The price is based on:

  • The material and finish
  • What kind of damage it is
  • How easy the damage is to reach
  • How many areas need work

Most people are surprised how affordable a repair is, particularly next to the cost of replacement. Send photos and we’ll give you the exact figure.

How to get a fixed quote

Most quotes are done from photos alone. To make it quick:

  • A coin beside the damage so we can judge size
  • A clear, close picture of the problem area
  • Details of any past repairs
  • Natural light rather than flash

The quickest way to a price is to send a couple of pictures using our quote form or call us. We will say immediately whether it can be repaired.

What we are called out for in High Bray

Most reseals are because of black mould. It grows into the silicone, so cleaning only removes the surface.

You may need us if you’ve spotted:

  • Leaks at the edges
  • Silicone smeared on tiles
  • Gaps in the seal
  • Missing sealant behind the taps

Questions to ask before you book

  • Whether they match the colour on site
  • What preparation is included
  • What happens if they find more damage
  • How long the guarantee is and what it covers

10 questions to ask before booking

The process

On the day, we arrive at the time we have agreed, cover the area with dust sheets and masking, and set to work. Expect it to take around two hours. We tidy up before we leave and tell you when it’s ready to use.

  1. We protect the area and mask the joint lines.
  2. We remove the old sealant and every trace of residue.
  3. The joint is cleaned, treated and dried.
  4. Fresh silicone is applied in a continuous bead.
  5. We smooth the bead, remove the tape and leave it to cure.

Getting ready for the visit

  • Let the surface dry out before the visit
  • Have a window or extractor fan available
  • Clear toiletries, mats and anything else from around the area

Ask for a price

Send us a photo of the damage and a wider shot of the whole item, with your EX32 postcode, and we will reply with a fixed price.

Get a fixed quote

Related advice

Work for landlords and builders

We carry out planned and one-off repairs for housing associations and facilities teams. Repairing in place avoids the disruption of a replacement, which is easier on the people living there.

Landlords, letting agents and housing providers in High Bray use us as well as householders. A repair between tenants keeps the property empty for less time, and it typically costs far less than a refit.

What your bath or shower is made of matters

Baths

We fill the bath before sealing, so the joint is at its widest.

Sinks and worktops

We reseal basins, vanity tops and kitchen worktops, once the joint is completely dry.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.