Kirklees · England

Bath Resealing in High Flatts

We travel to High Flatts for bath, shower and sink resealing with new mould-resistant silicone. Nothing is taken out, with a one-year guarantee.

  • Gaps in the seal
  • Leaks at the edges
  • Silicone smeared on tiles
Surface Doctor technician refinishing the outside of a roll-top bath

Bath resealing in High Flatts

About our bath resealing in High Flatts

A good reseal is all about preparation: old silicone removed, mould treated, the joint cleaned and dried. Only then does the new sealant go on, in a neat, continuous bead. If you are dealing with black mould in the sealant and silicone smeared on tiles, we can normally put it right.

Peace of mind is built in: our one-year guarantee applies to every job, and we’ll explain exactly what it covers when we quote.

Roll-top bath being refinished by a Surface Doctor technician
Where
High Flatts (HD8)
Region
Kirklees
Cover
12 months on all our work
Quote
Free and fixed, from your photos
Call
0345 017 0787
Last updated
23 October 2026

Common questions in High Flatts

What happens after I send photos?

We come back with a fixed price, normally with dates to choose from. There’s no obligation to book.

Do you work in High Flatts?

Yes. We cover the entire UK and come to High Flatts and the rest of Kirklees. Send photos and we’ll quote, or call 0345 017 0787.

How do I book?

Photos of the damage, a photo of the whole bath or shower and your postcode. After that, we just agree a date.

Can you price it without visiting?

Yes, almost always. Clear pictures let us give you a fixed quote without visiting.

Are you accredited?

We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.

Is my repair covered?

Yes: twelve months. If anything goes wrong with the repair within the year, we return to fix it.

Is it safe with children and pets around?

Yes, as long as they stay out of the room we are working in. We will let you know when it’s safe to use again.

Why does my sealant keep going mouldy?

Usually poor ventilation and moisture sitting on the joint. We use mould-resistant silicone, and ventilation helps it last.

How to look after the repair

Looking after the surface is easy:

  • Open a window after bathing
  • Replace the seal when mould sets in
  • Wipe the joints dry after use
  • Ventilate the bathroom well

Do not scrape the sealant with anything sharp, and keep shampoo bottles off the joints.

Don’t wait until water gets behind the bath. Gaps or lifting edges mean it needs doing.

Honest limits

Honesty matters more than a booking, so here’s what a repair will not do:

  • Tiles that move, until they’re refixed
  • Gaps too big for silicone alone
  • Movement in the bath or tray

Send us pictures and we will tell you honestly.

What we work on

  • Basins & vanity units
  • Kitchen worktops & sinks
  • Shower trays & enclosures
  • Baths
  • Wet rooms

Landlord and trade work in High Flatts

Hospitality businesses can’t afford rooms out of action for long, so most of our work is done in a single visit. We can work around your bookings.

We carry out planned and one-off repairs for housing associations and facilities teams. Repairing in place avoids the disruption of a replacement, which is easier on the people living there.

Our work in High Flatts

High Flatts is about 7 miles south-east of Huddersfield, in Kirklees. Book a date that suits you, and you’ll know when to expect us, so you’re not left waiting in all day. Our technicians cover 189 places in Kirklees. Our nearest city page is Leeds, about 18 miles away.

We work across the HD8 postcode area. Whether you live on Penistone Road and Windmill Lane or a nearby road, a technician can come to you. We also travel to Birds Edge (1 mile north-west), Upper Cumberworth (1 mile north), Ingbirchworth (1 mile south-east), Upper Denby (1 mile east) and Denby Dale (1 mile north-east). Within a short drive, we also cover Huddersfield (7 miles north-west), Dewsbury (9 miles north), Batley (11 miles north), Mirfield (8 miles north), Liversedge (10 miles north) and Cleckheaton (11 miles north).

Local landmarks in High Flatts

In High Flatts, that means homes near The Crown And Adjoining House, Church of St Nicholas and Shelley College. The closest station to High Flatts is Denby Dale station, about 1.1 miles north-east of the centre. Nearby you will also find Storthes Hall Hospital (3.8 miles north-west) and De Morgan Museum (3.9 miles east).

  • Parks and local facilities nearby include Cumberworth Half (1.3 miles north)
Map of High Flatts © OpenStreetMap contributors

What affects the price in High Flatts

We charge the same across the UK, including High Flatts. What changes the price is:

  • The size and number of damaged areas
  • Access to the area
  • Whether we combine several jobs
  • The material

Set against the cost of replacement, a repair is generally a fraction of the price, because nothing has to be taken out, refitted or made good. Your fixed quote shows exactly what’s included.

Getting a price from pictures

It only takes a minute to photograph the damage. Try to send:

  • Details of any past repairs
  • A clear, close picture of the problem area
  • Something in shot to show the size
  • A wider photo showing the entire bath or shower

Upload photos of the damage and one of the entire item, with your HD8 postcode, and we’ll come back with a fixed quote.

What your bath or shower is made of matters

Sinks and worktops

We reseal basins, vanity tops and kitchen worktops, with the joint fully dried first.

Shower trays

We put weight on a tray before sealing it, so the joint is at its widest.

What we do, step by step

Once we’re through the door, we keep the work contained to the one room. We mask off everything nearby, the work takes about two hours for a bath, and we finish by cleaning up and talking you through the result.

  1. We cut out and remove all of the old sealant.
  2. We clean the joint and treat any mould.
  3. The joint is dried thoroughly.
  4. We fill a bath with water before sealing so the gap is at its widest.
  5. New mould-resistant silicone goes on and is tooled to a neat finish, including around the taps.

How to prepare

  • Open a window if you can
  • Mention any parking restrictions or tricky access
  • Keep children and pets away from the room on the day

Get a quote

Most customers in High Flatts get their price from pictures. Add a line about what happened and your postcode, and we’ll send back a fixed quote and some dates.

Get a free quote

Related advice

DIY repairs versus a professional job

A DIY attempt isn’t a disaster. We remove the old filler and start again, so it will not stop us repairing it. Just mention it when you send pictures, as it can add time.

You can buy a DIY kit for most repairs, and they can make a small mark look better. The trouble is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair won’t last.

Is resealing worth it?

A professional reseal costs little compared with water damage. It’s quick, tidy and protects your home. There are no surprise extras on the day. The price we quote from your pictures is the price you pay, unless the damage turns out to be different, in which case we talk to you first.

Why book with us

  • Most jobs done in one visit
  • We come to you, anywhere in the UK
  • Every repair guaranteed for a year
  • No extra charge for your area

See our pricing.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.