Walsall · England
Bath & shower resealing (mastic) in Highgate, Walsall
Fixed-price bath resealing in Highgate and the surrounding area, generally in one visit.
- An untidy old seal
- Damp near the bath
- Mould you cannot clean out
How we handle bath resealing in Highgate
We reseal baths, shower trays, basins and worktops. Most jobs take a couple of hours, plus curing time. We work on baths, shower trays & enclosures and wet rooms, and common reasons people contact us are gaps in the seal and mould you can’t clean out.
The work is covered for a year after we finish. If anything isn’t right, ring us and we will come back.
- Location
- Highgate (WS1)
- Region
- Walsall
- Cover
- One year on every repair
- Quote
- Free, fixed price from pictures
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
What your bath or shower is made of matters
Sinks and worktops
Basins, vanity units and kitchen worktops are resealed too, with the joint fully dried first.
Baths
Baths are resealed with water in them, so the joint is at its widest.
What else we do in Highgate
What we do, step by step
Nothing needs to be moved out of the room beforehand. We bring everything we need with us, put protection down and start once you are happy with the plan. Most jobs take around two hours, and you’re welcome to carry on with your day while we work.
- The surrounding area is protected and the joints masked.
- We remove the old sealant and every trace of residue.
- The joint is cleaned, treated and dried.
- We run a continuous bead of new silicone.
- We smooth the bead, remove the tape and leave it to cure.
Getting ready for the visit
- Clear the area around the damage
- Let us know if it has been repaired before
- Let us know about parking or access
Ask for a price
Ring 0345 017 0787, or send us photos through the quote form. With one close-up and one wider picture, we can give you a fixed quote without visiting.
Read more
Our work in Highgate
Highgate is about 1 mile south of Walsall, in Walsall. Whether you’re in the middle of Highgate or on the outskirts, the service is the same: a fixed quote, a tidy visit and a guarantee. Highgate is one of 39 places in Walsall where we work. Our nearest city page is Birmingham, about 8 miles away.
Jobs in WS1 are booked in the same way as anywhere else. From Bath Road, Love Lane and Bott Lane or anywhere nearby, a technician can come to you. We also cover the places around Highgate: Walsall (1 mile north), Caldmore (1 mile west), Chuckery (1 mile north-east), Palfrey (1 mile south-west) and The Delves (1 mile south). We also work in nearby towns such as Willenhall (3 miles north-west), Bloxwich (3 miles north), Brownhills (5 miles north-east), Aldridge (3 miles north-east), Pelsall (4 miles north) and Blakenall Heath (3 miles north).
Local landmarks in Highgate
Typical jobs here are in homes near St Mary's The Mount Catholic Primary School, Church of St Michael and All Angels and Walsall Arboretum, among other places. You’ll also find Blue Coat Church of England Academy (less than half a mile north), The White Lion pub (within half a mile south-west) and Blue Coat Church of England Academy (less than half a mile north). The closest station to Highgate is Walsall station, roughly 0.6 miles north-west of the centre. Other landmarks nearby include Jerome K Jerome Birthplace Museum (0.5 miles north-west) and Walsall Castle (1.1 miles north-west). The countryside around Highgate includes Gorse Farm Wood and Forge Mill Lake.
How we price bath resealing
We charge the same across the UK, including Highgate. What changes the price is:
- Whether old repairs or coatings need taking off
- The colour and finish to match
- How much damage there is
- Access to the area
It helps to know what pushes a price up or down: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send pictures and you’ll get a fixed figure.
How to get a fixed price
A couple of clear pictures is all it takes. It helps if you send:
- Good light, ideally daylight, without flash glare
- A clear, close picture of the problem area
- Any earlier repairs or coatings
- A picture taken from further back
For most jobs, pictures are all we need to give you a price. Add a line about what happened and your postcode, and we will send back a fixed quote and some dates.
Resealing in Highgate: why it matters
Resealing is routine maintenance. Leaving split or mouldy sealant lets water get behind the bath or tray, which costs far more to put right. We do not add extras on the day. What we quote from your pictures is what you pay, and if the damage turns out to be different, we discuss it before starting.
Why Highgate clients choose us
- Work done at your home or business
- We leave the room as we found it
- Usually one visit, start to finish
- One price list for the whole UK
Read our full price list.
DIY repairs versus a professional job
A DIY attempt is not a disaster. We remove the old filler and start again, so it does not stop a professional repair. Just mention it when you send photos, as it can add time.
What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.
When to call us in Highgate
Sealant splits when the bath or tray moves, frequently because it was sealed with the bath empty.
You may need us if you’ve spotted:
- Unsealed corners
- Discoloured, yellow sealant
- Black mould in the sealant
- An untidy old seal
What to look for in a quote
- How to look after the finish
- Whether a trained technician does the job
- What happens if they find more damage
- The length of the guarantee and what it covers
Your questions about bath resealing in Highgate
How long does resealing take?
Around two hours for a bath, then it needs to cure.
How long does silicone take to cure?
Normally after around 24 hours. We confirm before we leave.
Can you repair something that’s been repaired before?
In most cases. The old repair comes out first, so mention it when you send photos.
Why does mould come back so fast?
Mostly moisture and poor ventilation. We use mould-resistant silicone, and ventilation helps it last.
Will you leave a mess?
We protect the room with dust sheets and masking first, and we clean up when we’ve finished.
Is my repair covered?
All our work carries our one-year guarantee. Ask us what it covers when you get your quote.
Do you seal over the old sealant?
Never over old. It’s removed, cleaned off and the joint dried first.
Does someone need to be in?
Yes. The technician needs access to the room for the visit, at a time that suits you.
Landlords, agents and businesses in Highgate
Builders use us to fix snagging damage before handover, saving last-minute replacements. Several plots can be done in one visit to keep costs down.
We also carry out snagging repairs for builders and developers, fixing chips and scratches before handover. We hold CHAS, Constructionline and SafeContractor accreditations.
Aftercare tips
It’s all simple stuff:
- Let steam out after showers
- Do not stand toiletries on the seal
- Clean the joints with a mild cleaner
- Reseal at the first sign of lifting
Avoid scraping the joints, and don’t stand bottles on the seal.
Don’t wait until water gets behind the bath. Gaps or lifting edges mean it needs doing.
About our accreditations · Every repair comes with a one-year guarantee.
