Pembrokeshire · Wales
Bath & shower resealing (mastic) in Hill, Pembrokeshire
Bath, shower and sink resealing with new mould-resistant silicone for homeowners, landlords and businesses in Hill. Send photos for a free, fixed quote.
- A messy previous reseal
- Water getting behind the bath or tray
- Stained silicone
Bath resealing in Hill without replacing anything
We reseal baths, shower trays, basins and worktops, with mould-resistant sanitary silicone. A typical reseal takes a couple of hours, then it needs to cure. Whether it’s stained silicone and black mould in the sealant, we can normally put it right, on baths, kitchen worktops & sinks and wet rooms alike.
You’re covered for a year from the day of the repair. Just call us if there’s a problem and we will come back.
- Area
- Hill (SA68)
- County
- Pembrokeshire
- Warranty
- One year on every repair
- Price
- Free, fixed price from pictures
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
What bath resealing costs
There’s no charge for travel to Hill. The price depends on:
- Whether it’s a chip, crack, burn or wear
- How easy the damage is to reach
- How many items we do on one visit
- Unusual colours or finishes
No two jobs are quite the same, so each one is priced on its own. The size and type of damage, the material and access all make a difference, and doing several things on one visit costs less than separate visits.
How to get a fixed price
You can take the pictures on your phone, there’s no need for anything special. Make sure they show:
- Natural light rather than flash
- The postcode, so we can plan the visit
- Any earlier repairs or coatings
- One sharp close-up of the damage
Getting a price is easy: snap the damage close up and then the entire item, send them over with your postcode, and you’ll get a fixed price back. There is no charge for the quote and no obligation.
Signs you need bath resealing in Hill
A bathroom without good ventilation is hard on sealant: damp hangs around, and mould takes hold.
If you can see any of these, send us a picture:
- Unsealed corners
- Old sealant that looks dirty
- Damp near the bath
- Sealant that is split or lifting
Comparing quotes
- Whether they match the colour on site
- When it can be used again
- If travel is included in the price
- Who will actually do the work
Hill and the surrounding area
Hill is about 12 miles south-east of Haverfordwest, in Pembrokeshire. Clients in Hill get the same service as everywhere else we cover: a fixed quote from pictures, then a visit to do the work. We work in all 223 towns and villages across Pembrokeshire, from the larger towns to small villages.
Our visits in SA68 are booked in the same way as anywhere else. If you’re just outside Hill, we cover Kingsmoor (1 mile north-east), Pentlepoir (1 mile south-west), Begeli (1 mile north-west), The Valley (1 mile south) and Cilgeti (1 mile north-east). We also work in nearby towns such as Haverfordwest (12 miles north-west), Milford Haven (13 miles west), Pembroke (9 miles south-west), Pembroke Dock (10 miles west), The Marsh (12 miles north-west) and Dinbych-y-Pysgod (4 miles south).
Near you in Hill
In Hill, that means homes near Stepaside C.P. School, Church Of St. Mary and Begelly Arms, among other places. Hill has its own railway station: Saundersfoot station. A little further out are Castle Ring (0.6 miles north-west) and Tenby Museum and Art Gallery (3.8 miles south). For a walk, there is Pentlepoir Hill.
Can I fix it myself?
If you are set on a kit, follow its instructions closely, and give it the full curing time. If it fails, we can still put it right.
DIY kits are sold for most surfaces, and they can make a small mark look better. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair won’t last.
Materials and what they mean for the repair
Baths
Baths are resealed with water in them, so the joint is at its widest.
Shower trays
We put weight on a tray before sealing it, for the same reason.
Questions from Hill
How do I book?
Photos of the damage, a picture of the entire bath or shower and your postcode. After that, we just agree a date.
How quickly can you book me in?
Your quote comes with available dates. If it’s urgent, say so and we will do what we can.
What happens after I send pictures?
You will get a fixed quote back, normally with dates to choose from. There is no obligation to book.
Is the work guaranteed?
All our work carries our one-year guarantee. Ask us what it covers when you get your quote.
What if the damage is worse than the photos show?
If we find something the pictures didn’t show, we explain it first. The price only changes if you agree.
Do you work in Hill?
Yes. We work across the UK and travel to Hill and the rest of Pembrokeshire. Send pictures and we will quote, or call 0345 017 0787.
Are you accredited?
We’re accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
How long will it take?
Typically a couple of hours, then it needs to cure.
Nearby places to Hill
More services for Hill
What we can’t put right
A repair isn’t right for every job, for example:
- Tiles that move, until they’re refixed
- Very wide gaps that need a trim
- Hidden water damage
Not sure? Send photos and we will give you a straight answer.
Surfaces we repair
- Basins & vanity units
- Wet rooms
- Shower trays & enclosures
- Baths
- Kitchen worktops & sinks
Landlord and trade work in Hill
Housing associations and facilities teams use us for planned and reactive repairs in Pembrokeshire and across the UK. A repair avoids taking out and refitting, which is easier on the people living there.
We regularly work with letting and managing agents. Send the address, pictures and access details.
How the visit works
Here’s how a visit generally runs: we arrive at the agreed slot, protect everything around the work area, carry out the work and tidy away. Allow a couple of hours from start to finish. Before we go, we will explain when it can be used and how to look after it.
- We cut out and remove all of the old sealant.
- Next we clean the joint and deal with mould.
- We dry the joint thoroughly.
- Baths are filled with water first, so the joint is at its widest.
- We apply new mould-resistant silicone and tool it to a neat finish, including around the taps.
How to prepare
- Let us know if it has been repaired before
- Clear toiletries, mats and anything else from around the area
- Have somewhere for us to park nearby if possible
Get a quote
Call 0345 017 0787 or use the quote form. With one close-up and one wider picture, we can give you a fixed quote the same day in most cases.
Advice
Looking after it afterwards
It’s all simple stuff:
- Do not stand toiletries on the seal
- Keep the joints dry
- Clean the joints with a mild cleaner
- Reseal when black spots will not clean off
Avoid scraping the joints, and keep shampoo bottles off the joints.
Do not wait until water gets behind the bath. Split or lifting sealant is a sign it’s time.
About our accreditations · Every repair comes with a one-year guarantee.
