Somerset · England
Bath Resealing in Holcombe Rogus
Bath, shower and sink resealing with new mould-resistant silicone for householders, landlords and businesses in Holcombe Rogus. Free, fixed quotes from your pictures.
- Missing sealant behind the taps
- Black mould in the sealant
- Gaps in the seal
How we handle bath resealing in Holcombe Rogus
All of the old sealant is cut out, deal with any mould, and apply fresh mould-resistant silicone. We do this for baths, showers, sinks and worktops, and that includes the awkward spots behind the taps. If you’re dealing with discoloured, yellow sealant and sealant that’s split or lifting, we can typically put it right, on basins & vanity units, wet rooms and shower trays & enclosures alike.
We stand behind the work with a one-year guarantee, so you are not left on your own once we have gone.
- Location
- Holcombe Rogus (TA21)
- Area hub
- Somerset
- Warranty
- One year on every repair
- Price
- Fixed and free, based on pictures
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
How we price bath resealing
Quotes are free and the price is fixed. What we look at:
- How hard the colour is to match
- Where the damage is and how we get to it
- The size and number of damaged areas
- Whether we combine several jobs
Our prices are the same across the UK, so there is no premium for Holcombe Rogus. The job itself decides the price: the material, the amount of damage and how many items.
Quotes from your photos
Almost every job we do is priced from pictures. This is what to send:
- Good light, ideally daylight, without flash glare
- A coin beside the damage so we can judge size
- Whether it’s been repaired or coated before
- What it’s made of, if you know
Call 0345 017 0787 or use the quote form. With one close-up and one wider picture, we can give you a fixed price without visiting.
Nearby places to Holcombe Rogus
Also in Holcombe Rogus
Holcombe Rogus and the surrounding area
Holcombe Rogus is about 5 miles west of Wellington, in Somerset. Wherever you are in the TA21 postcode area, a technician comes to you. We work in all 640 towns and villages across Somerset.
Our visits in TA21 are booked in the same way as anywhere else. Jobs here include addresses on Fore Street, Frog Lane and South Street and the roads around them. We also cover the places around Holcombe Rogus: Westleigh (1 mile south), Burlescombe (1 mile south-east), Great Fossend (1 mile south-east), Greenham (2 miles north-east) and Ashbrittle (2 miles north). Larger places within reach include Taunton (11 miles east), Wellington (5 miles east), Wilton (11 miles east), Comeytrowe (10 miles east), Watchet (15 miles north) and Monkton Heathfield (13 miles north-east).
What’s near Holcombe Rogus
Our clients here include homes close to Prince of Wales pub, Webber's Church of England Primary School and Church of All Saints, among other places. For rail, the closest station is Tiverton Parkway station, about 3.2 miles south of the centre. Well-known places in the area include Huntsham Castle (3.7 miles west).
Materials and what they mean for the repair
Sinks and worktops
Basins, vanity units and kitchen worktops are resealed too, with the joint fully dried first.
Baths
We fill the bath before sealing, so the joint is at its widest.
Is resealing worth it?
A professional reseal costs little compared with water damage. It’s a quick job that protects your walls and floors. No two jobs are quite the same, so we price each one individually. What’s damaged, how badly and how easy it is to reach all make a difference, and combining jobs on one visit brings the cost down.
Why book with us
- A year’s guarantee on all work
- Honest advice, even when it means no job
- No extra charge for your area
- Work done at your home or business
Read our prices page.
Signs you need bath resealing in Holcombe Rogus
Poor ventilation speeds things up: moisture sits on the joints longer, and mould grows faster.
You may need us if you’ve spotted any of these:
- Discoloured, yellow sealant
- Black mould in the sealant
- Leaks at the edges
- Silicone smeared on tiles
What to look for in a quote
- What protection goes down before work starts
- How the colour is matched
- What happens if the damage is worse than the photos show
- How soon you can use it again
What happens on the day
Here’s how a visit usually runs: we arrive at the agreed slot, sheet and mask the area around the job, do the job and tidy away. Allow around two hours from start to finish. Before we go, we will explain how long to leave it and what to avoid for the first few days.
- First we strip out every bit of the old mastic.
- We clean the joint and treat any mould.
- We ensure the joint is completely dry.
- Baths are filled with water first, so the joint is at its widest.
- New mould-resistant silicone goes on and is tooled to a neat finish, taps included.
How to prepare
- Tell us about any previous repairs or coatings
- Make sure the area is dry
- Have somewhere for us to park nearby if possible
Ask for a price
No survey visit is needed: we price from pictures. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and you’ll get a fixed figure back.
Read more
Should I try a DIY kit first?
We understand the appeal of fixing it yourself. The trouble is that kit repairs often look fine at first and then fail, and the old filler has to come out before a proper repair.
What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.
Aftercare tips
Good habits make a big difference to how long a repair lasts. Here’s what we suggest:
- Run the extractor fan during and after showers
- Let steam out after showers
- Replace the seal when mould sets in
- Keep the joints dry
Let it cure fully before using the bath or shower, normally around 24 hours.
Reseal before water gets in. Split or lifting sealant is a sign it’s time.
Common questions in Holcombe Rogus
Can you price it without visiting?
Generally, yes. Clear pictures let us give you a fixed price without visiting.
My seal keeps tearing. Why?
Movement is the usual cause, or it was sealed with the bath empty. We fill the bath before sealing it.
Is it worth repairing rather than replacing?
Generally, yes. Replacement brings removal, refitting and making good, which a repair avoids. If it is not worth repairing, we’ll tell you.
When can you do it?
Your quote comes with available dates. Tell us if you need it done quickly.
Do you do work for letting agents?
Yes. We work for landlords, agents, builders and businesses as well as householders across Somerset.
How much does bath resealing cost in Holcombe Rogus?
Because every job differs, we price from pictures. You will get a fixed figure before booking.
Will there be a smell?
There may be a mild smell during the work that clears as it cures.
Will you leave a mess?
No. The work area is masked and covered, and we leave the room clean.
Honest limits
We won’t take on work that won’t last, so here’s what a repair can’t put right:
- Movement in the bath or tray
- Gaps too big for silicone alone
- Loose tiles, which need refixing first
Send us photos and we will tell you honestly before you book.
Materials we repair
- Wet rooms
- Basins & vanity units
- Shower trays & enclosures
- Baths
- Kitchen worktops & sinks
About our accreditations · Every repair comes with a one-year guarantee.
