Herefordshire · England

Bath Resealing for Holme Marsh homes

Fixed-price bath resealing in Holme Marsh and the surrounding area, generally in one visit and guaranteed for a year.

  • Discoloured, yellow sealant
  • Mould you can’t clean out
  • Leaks at the edges
Surface Doctor technician refinishing the outside of a roll-top bath

Bath resealing for Holme Marsh homes

Why reseal now?

Resealing is a small job. Putting off a reseal can let water reach the walls and floor, which costs far more to put right. What it costs depends on the type and amount of damage, what it’s made of and how many items we do on one visit. We give a fixed quote from your pictures, so you know the cost before you book.

Why us?

  • Fixed prices from your pictures
  • Accredited with CHAS, Constructionline and SafeContractor
  • Same prices wherever you are
  • Typically one visit, start to finish

See our prices page.

About our bath resealing in Holme Marsh

Baths are resealed with water in them, so the joint is at its widest, which stops the new seal tearing the first time the bath is used. We work on shower trays & enclosures, wet rooms and basins & vanity units, and common reasons people get in touch are mould you can’t clean out and damp near the bath.

The work is covered for a year after we finish. If anything isn’t right, ring us and we will come back.

Location
Holme Marsh (HR5)
Area hub
Herefordshire
Guarantee
12 months on all our work
Quotes
Free and fixed, from your pictures
Phone
0345 017 0787
Updated
23 October 2026
Surface Doctor technician refinishing the outside of a roll-top bath

Covering Holme Marsh

Holme Marsh is about 10 miles west of Leominster, in Herefordshire. Across the HR5 area, a technician comes to you. Holme Marsh is one of 255 towns and villages in Herefordshire where we work. We work right across the region, from Holme Marsh to Birmingham (about 49 miles away).

We work across the HR5 postcode area. Close by, we cover Woonton Ash (1 mile east), Lyonshall (1 mile north-west), Moorcot (1 mile north-east), Lower Broxwood (1 mile east) and Hopley's Green (1 mile south). Further out, we also cover Hereford (14 miles south-east), Leominster (10 miles east), Redhill (14 miles south-east), Newton Farm (14 miles south-east), Whitecross (13 miles south-east) and Eign Hill (15 miles south-east).

Landmarks near Holme Marsh

Typical jobs here are in homes near Church of St Michael and All Angels and The Royal George pub, among other places. Other landmarks nearby include Lyonshall Castle (1.1 miles north-west) and Kington Museum and History Centre (3 miles west). The countryside around Holme Marsh includes Titley Pool and Bradnor Hill.

Map of Holme Marsh © OpenStreetMap contributors

The process

On the day itself, there is little for you to do. Show us the job, point us to the room, and we’ll get on with it. The job generally runs to a couple of hours.

  1. The old silicone is cut out completely.
  2. Residue is removed and the joint cleaned.
  3. We treat mould and dry the joint thoroughly.
  4. The bath is filled with water, or weight put on the tray.
  5. We apply fresh mould-resistant silicone and tool a neat bead.

How to prepare

  • Have somewhere for us to park nearby if possible
  • Tell us about any previous repairs or coatings
  • Let us know about parking or access

How to get a price

Call 0345 017 0787 or use the quote form. With a clear picture of the damage and one of the entire bath or shower, we can give you a fixed quote the same day in most cases.

Get a free quote

Read more

Looking after it afterwards

Looking after the surface is easy:

  • Give the seal a regular clean
  • Keep bottles off the joints
  • Reseal when black spots will not clean off
  • Keep the joints dry

Keep the room well ventilated, and dry the joints after bathing to keep mould away.

If you notice damp, stains on the ceiling below or loose tiles, act quickly. There may be more going on, so we will tell you if it needs a builder or plumber.

Repairs by material

Baths

Baths are resealed with water in them, so the joint is at its widest.

Shower trays

We put weight on a tray before sealing it, so the joint is at its widest.

Work for landlords and builders

Housing associations and facilities teams use us for planned and reactive repairs. Repairing in place avoids the disruption of a replacement, which is easier on the people living there.

Hotels, guest houses and holiday lets cannot afford rooms out of action for long, so most of our work is done in a single visit. We can work around your bookings.

Common problems we fix in Holme Marsh

Even good sealant eventually discolours. Steam, soap and movement all take their toll.

Look out for these signs:

  • Silicone smeared on tiles
  • Discoloured, yellow sealant
  • Silicone coming away from the tiles
  • Black mould in the sealant

What to look for in a quote

  • How soon you can use it again
  • The length of the guarantee and what it covers
  • Whether the price covers travel
  • How your room will be protected

Our hiring checklist

What bath resealing costs

Each job gets its own fixed price. This is what makes a difference:

  • How many items we do on one visit
  • What kind of damage it is
  • Previous DIY repairs that have to come out
  • Access to the area

Every job is a little different, so we price each one individually. The size and type of damage, the material and access all play a part, and combining jobs on one visit brings the cost down.

Getting a price from photos

Most quotes are done from photos alone. To help us price it:

  • Where you are, by postcode
  • A clear, close picture of the problem area
  • A wider photo showing the whole bath or shower
  • Daylight if possible, and no flash reflection

Upload a photo of the damage and a wider shot of the entire item, with your HR5 postcode, and we will come back with a fixed quote.

Holme Marsh questions

Does someone need to be in?

Yes. The technician needs access to the room for the visit, at a time that suits you.

Can you reseal over the old silicone?

Never over old. It’s removed, cleaned off and the joint dried first.

What happens once I’ve sent photos?

We review the pictures and send a fixed quote with dates.

Will the price change on the day?

It’s rare, but if it happens we talk to you first. The price only changes if you agree.

Is repairing better than replacing?

Generally, yes. Replacement brings removal, refitting and making good, which a repair avoids. If it isn’t worth repairing, we will tell you.

Can you repair several things at once?

Of course, and it typically saves money. Send pictures of everything together and we will quote them together.

Do you cover Holme Marsh?

We do. Technicians travel to Holme Marsh from across the region, and the price is the same as everywhere else.

Is it messy?

Dust sheets and masking go down before we start, and we clean up when we have finished.

Honest limits

A repair isn’t right for every job, including:

  • Water damage behind the bath that needs a builder
  • A bath or tray that moves, until its support is fixed
  • Hollow or loose tiles

If in doubt, send pictures and we will say what we think before booking.

Materials we repair

  • Basins & vanity units
  • Baths
  • Kitchen worktops & sinks
  • Wet rooms
  • Shower trays & enclosures
CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.