Lincolnshire · England
Bath Resealing for Kelby homes
We travel to Kelby for bath, shower and sink resealing with new mould-resistant silicone. Nothing is taken out, and the work is guaranteed.
- Black spots in the silicone
- Stained silicone
- Sealant that is split or lifting
About our bath resealing in Kelby
All of the old sealant is cut out, deal with any mould, and reseal with new mould-resistant silicone. We reseal baths, showers, sinks and worktops, and that includes the awkward spots behind the taps. Typical jobs include gaps in the seal and mould you can’t clean out, on baths, shower trays & enclosures and wet rooms.
Peace of mind is built in: our one-year guarantee applies to every job, and we explain what it covers before booking.
- Where
- Kelby (NG32)
- Region
- Lincolnshire
- Cover
- A year, on every repair
- Price
- Fixed and free, based on pictures
- Call
- 0345 017 0787
- Updated
- 23 October 2026
Kelby and nearby
Kelby is about 5 miles south-west of Sleaford, in Lincolnshire. Wherever you are in the NG32 postcode area, we come to you. Kelby is one of 732 towns and villages in Lincolnshire we cover. Our nearest city page is Birmingham, about 67 miles away.
We work across NG32 and the streets around it. We also travel to Wilsford (1 mile north), Barkston Heath (2 miles west), Ancaster (2 miles north-west), Welby (3 miles south-west) and West Willoughby (3 miles north-west). Within a short drive, we also cover Grantham (7 miles south-west), Sleaford (5 miles north-east), Bourne (15 miles south), Austerby (15 miles south-east), Waddington (15 miles north) and Spittlegate (7 miles south-west).
Landmarks near Kelby
Around Kelby, we work in homes near Parish Church of St Andrew. Kelby’s nearest station is Ancaster station, roughly 2.2 miles north-west of the centre. A little further out are Sleaford Castle (4.5 miles north-east) and Rauceby Hospital (2.8 miles north-east).
Landlord and trade work in Kelby
Hospitality businesses need rooms back in use quickly, so most of our work is done in a single visit. We will fit around changeovers where we can.
Housing associations and facilities teams use us for planned and reactive repairs in Lincolnshire and across the UK. Repairing in place avoids the disruption of a replacement, which is easier on the people living there.
Your questions about bath resealing in Kelby
How long will it take?
Most reseals take about two hours. Leave it to cure before use.
What happens if you find more damage?
We will show you and explain before doing anything extra. Nothing extra is done without your say-so.
How do I book?
Photos of the damage, a photo of the entire bath or shower and your postcode. After that, we just agree a date.
Can you price it without visiting?
Usually, yes. A close-up and a wider photo are enough to give a fixed quote.
Is a repair better than a new one?
Typically, when the rest is in good condition. Repairing avoids the cost and disruption of replacing. We will tell you honestly if replacement makes more sense.
Do you do work for letting agents?
Yes. We carry out repairs for householders, landlords, letting agents, builders and businesses.
Is my repair covered?
Yes: twelve months. If anything goes wrong with the repair within the year, we return to fix it.
Are you accredited?
Yes, including CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
Resealing in Kelby: why it matters
A professional reseal costs little compared with water damage. It’s a quick job that protects your walls and floors. A repair is priced on what needs doing, not where you live. The full price is agreed before booking, with no extras added later.
Why us?
- Rooms protected and left tidy
- One visit for most repairs
- Every repair guaranteed for a year
- Fixed prices from your photos
See our pricing.
What your bath or shower is made of matters
Shower trays
Trays are sealed with weight on them, for the same reason.
Sinks and worktops
Basins, vanity units and kitchen worktops are resealed too, once the joint is completely dry.
How to look after the repair
Once the work has cured, treat it gently:
- Keep bottles off the joints
- Give the seal a regular clean
- Air the room after use
- Run the extractor fan during and after showers
Keep the room well ventilated, and wipe the joints after use to keep mould away.
If you notice damp, stains on the ceiling below or loose tiles, act quickly. There may be more going on, and we’ll say if you need a builder or plumber.
What we can’t put right
Some problems need a builder, plumber or fitter rather than us:
- Tiles that move, until they’re refixed
- Rotten walls or floors behind the bath
- Movement in the bath or tray
If in doubt, send photos and we will say what we think.
Materials we repair
- Kitchen worktops & sinks
- Shower trays & enclosures
- Baths
- Basins & vanity units
- Wet rooms
What we do, step by step
Arrival times are agreed in advance, so you know when to expect us. On site, it takes around two hours for most jobs. We leave the room clean and ready to use once it has cured.
- We protect the area and mask the joint lines.
- We remove the old sealant and every trace of residue.
- We clean, treat and dry the joint.
- Fresh silicone is applied in a continuous bead.
- The bead is smoothed, the tape removed and the seal left to cure.
Preparing for the visit
- Let the surface dry out before the visit
- Plan for the room to be out of bounds to pets and children
- Tell us about parking, stairs or access
Get a quote
Getting a quote takes a couple of minutes: photograph the damage, then the entire bath or shower, add your postcode and send them over. What comes back is a fixed price, not a guess.
Advice
What bath resealing costs
There are no hourly rates or hidden extras. The price is based on:
- The material
- How hard the colour is to match
- How easy the damage is to reach
- How many areas need work
A repair typically costs much less than people expect, especially compared with replacing and refitting. Send photos and we will give you the exact figure.
How to get a fixed quote
A couple of clear pictures is all it takes. It helps if you send:
- Good light, ideally daylight, without flash glare
- Something in shot to show the size
- One sharp close-up of the damage
- Any details about the material
The quickest way to a price is to send two or three photos through our quote form or ring us. We’ll say right away if a repair is the right fix.
Should I try a DIY kit first?
Kits are cheap and easy to find, but the repairs we redo most often are DIY ones that have discoloured or lifted. Doing it properly first is generally the cheaper route.
A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.
Places near Kelby
More services for Kelby
About our accreditations · Every repair comes with a one-year guarantee.
