Dumfries and Galloway · Scotland

Bath Resealing in Kelhead

Bath, shower and sink resealing with new mould-resistant silicone for homeowners, landlords and businesses in Kelhead. Free, fixed quotes from your pictures.

  • Sealant that’s split or lifting
  • Black mould in the sealant
  • An untidy old seal
Surface Doctor technician refinishing the outside of a roll-top bath

Bath resealing for Kelhead homes

Looking after it afterwards

So the finish stays in good condition:

  • Run the extractor fan during and after showers
  • Keep the joints dry
  • Open a window after bathing
  • Keep bottles off the joints

Run the extractor fan, wipe the joints dry after use, and clean them regularly with a mild cleaner to slow mould growth.

Don’t wait until water gets behind the bath. Gaps or lifting edges mean it needs doing.

Bath resealing in Kelhead without replacing anything

A fresh seal protects your bathroom. Failed sealant lets water get where it shouldn’t, and resealing puts a stop to that. Whether it’s gaps by the taps and silicone smeared on tiles, we can help, on wet rooms, shower trays & enclosures and kitchen worktops & sinks alike.

Your repair is guaranteed for a year, as with every job we do.

Surface Doctor technician refinishing the outside of a roll-top bath
Where
Kelhead (DG12)
County
Dumfries and Galloway
Cover
One year on every repair
Quote
Free, fixed quote from pictures
Phone
0345 017 0787
Updated
23 October 2026

Common problems we fix in Kelhead

Even good sealant eventually discolours, especially in a busy family bathroom. Steam, soap and movement all wear it down.

Look out for any of the following:

  • Silicone smeared on tiles
  • Gaps in the seal
  • Black mould in the sealant
  • Water getting behind the bath or tray

Before booking anyone

  • Is the price fixed, and does it include VAT?
  • What happens if they find more damage
  • How the colour is matched
  • What the guarantee covers, and for how long

How to compare quotes

What your bath or shower is made of matters

Sinks and worktops

We reseal basins, vanity tops and kitchen worktops, once the joint is completely dry.

Shower trays

We put weight on a tray before sealing it, for the same reason.

What we do, step by step

We turn up at the time we agreed with you and checks the damage against your pictures first. Dust sheets and masking tape go down before any work starts. Most visits take a couple of hours, and we leave the room as we found it.

  1. We protect the area and mask the joint lines.
  2. Old sealant and residue are removed.
  3. We clean, treat and dry the joint.
  4. Fresh silicone is applied in a continuous bead.
  5. We smooth the bead, remove the tape and leave it to cure.

Getting ready for the visit

  • Plan for the room to be out of bounds to pets and children
  • Let us know if it has been repaired before
  • Clear the area around the damage

Ask for a price

If you are in Kelhead and want a price, the easiest route is photos: a close-up, a wider shot and your postcode. We reply with a fixed quote and our next available dates.

Get a free quote

Advice

FAQs for Kelhead

Do you do work for letting agents?

Yes, often. We can quote for several properties together and work between tenancies.

Is repairing better than replacing?

Usually, if the item is otherwise sound. A repair avoids removal and making good. We’ll tell you honestly if replacement makes more sense.

Do you cover the entire of Dumfries and Galloway?

We work UK-wide, and that includes Kelhead. Our prices are the same everywhere.

Are you a vetted contractor?

We are accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.

Why does mould come back so fast?

Damp is the cause. Run the fan, dry the joints and the new seal stays cleaner for longer.

Can you price it without visiting?

Normally, yes. A close-up and a wider photo are enough to give a fixed price.

How long before I can shower?

We will give you the curing time, normally around a day.

Can you repair several things at once?

Yes. Combining jobs on one visit brings the cost down. Send photos of everything you’d like done.

Can I fix it myself?

If you’re set on a kit, follow its instructions closely and work on a clean, dry surface, and give it the full curing time. If it doesn’t work out, we can still repair it properly.

We understand the appeal of fixing it yourself. The trouble is that kit repairs often look fine at first and then fail, and then the old filler has to be removed first.

Honest limits

A few problems are outside what a surface repair can do:

  • Gaps so wide they need filling or trims before sealing
  • Hidden water damage
  • Hollow or loose tiles

Not sure? Send pictures and we will give you a straight answer.

Materials we work on in Kelhead

  • Baths
  • Shower trays & enclosures
  • Basins & vanity units
  • Kitchen worktops & sinks
  • Wet rooms

Prices and what affects them

Prices are worked out job by job. What matters most is:

  • Where the damage is and how we get to it
  • Doing more than one item at once
  • How many areas need work
  • Whether old repairs or coatings need taking off

Compared with replacing, a repair is normally a fraction of the price, because there’s no removal, plumbing or making good. The quote lists exactly what you’re paying for.

Getting a price from photos

You can take the photos on your phone. Just ensure we can see:

  • Something in shot to show the size
  • A wider photo showing the entire bath or shower
  • Any earlier repairs or coatings
  • Natural light rather than flash

For most jobs, photos are all we need to give you a price. Tell us what happened and where you are, and we will send back a fixed quote and some dates.

Landlord and trade work in Kelhead

We’re used to working with agents and managing companies. Send the address, pictures and access details and we’ll handle the rest.

We carry out planned and one-off repairs for housing associations and facilities teams. A repair avoids taking out and refitting, which matters when someone is living in the home.

About Kelhead

Kelhead is about 11 miles east of Dumfries, in Dumfries and Galloway. We travel to clients in Kelhead and nearby villages, so there’s no workshop to go to. Kelhead is one of 138 towns and villages in Dumfries and Galloway where we work. Our jobs stretch from Kelhead to Edinburgh (about 65 miles away).

We cover every part of DG12 and the streets around it. Other places close to Kelhead include Cummertrees (2 miles south), Powfoot (2 miles south), Brydekirk (3 miles east), Howes (3 miles south-east) and Newbie (3 miles south-east). Larger places within reach include Dumfries (11 miles west), Annan (4 miles south-east), Lockerbie (8 miles north), Heathhall (11 miles north-west), Newbridge Drive (13 miles north-west) and Gretna (11 miles east).

Local landmarks in Kelhead

The closest station to Kelhead is Annan station, roughly 3.6 miles south-east of the centre. Further afield, we also cover the area around Ruthwell Museum (3 miles south-west) and Annan Hospital (4 miles south-east).

Map of Kelhead © OpenStreetMap contributors
CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.