Northamptonshire · England
Bath Resealing in Kelmarsh
Bath, shower and sink resealing with new mould-resistant silicone for householders, landlords and businesses in Kelmarsh. Free, fixed quotes from your photos.
- Mould you cannot clean out
- Missing sealant behind the taps
- Silicone smeared on tiles
Kelmarsh and nearby
Kelmarsh is about 5 miles south of Market Harborough, in Northamptonshire. We work in every kind of home, old or new, large or small, plus businesses and rented homes. We work in all 364 towns and villages across Northamptonshire, from the larger towns to small villages. Our jobs stretch from Kelmarsh to Birmingham (about 41 miles away).
Every address in NN6 is covered, from the main roads to the quietest streets. We also cover the places around Kelmarsh: Clipston (2 miles north-west), Great Oxendon (3 miles north), East Farndon (4 miles north), Little Bowden (5 miles north) and Market Harborough (5 miles north). Larger places within reach include Northampton (11 miles south), Corby (10 miles north-east), Kettering (8 miles east), Wellingborough (12 miles south-east), Daventry (15 miles south-west) and Desborough (5 miles north-east).
What’s near Kelmarsh
Around Kelmarsh, we work in homes near Church of St Denys and the streets around them. The closest station to Kelmarsh is Market Harborough station, roughly 5 miles north. Nearby you will also find Draughton (2.8 miles south-east) and Carpetbagger Aviation Museum (1.9 miles east). The countryside around Kelmarsh includes Rothwell Gullet.
How we handle bath resealing in Kelmarsh
We reseal baths with them filled with water, so the joint is at its widest, which stops the new seal tearing the first time the bath is used. We are frequently asked to fix old sealant that looks dirty and sealant that’s split or lifting, across wet rooms, shower trays & enclosures and kitchen worktops & sinks.
We stand behind the work with a one-year guarantee.
- Where
- Kelmarsh (NN6)
- Area hub
- Northamptonshire
- Warranty
- One year on every repair
- Price
- Fixed and free, based on pictures
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
What affects the price in Kelmarsh
You will know the full cost before booking. We take into account:
- Where the damage is and how we get to it
- How much damage there is
- What kind of damage it is
- The colour and finish to match
A repair typically costs much less than people expect, especially compared with replacing and refitting. Photos let us give you the exact figure.
How to get a fixed price
Most quotes are done from photos alone. To make it quick:
- The material, if you know it
- A close-up of the damage, in focus
- Any earlier repairs or coatings
- The postcode, so we can plan the visit
To get a price, send a couple of photos using our quote form or ring us. We will tell you honestly if a repair is the right fix.
Nearby places to Kelmarsh
Other services in Kelmarsh
What we do, step by step
Expect a friendly, tidy visit. We confirm the time with you beforehand, cover and mask the work area, and get on with the job, which usually takes about two hours for a bath. If we find something your photos didn’t show, we will explain it before carrying on.
- First we strip out every bit of the old mastic.
- We clean the joint and treat any mould.
- The joint is dried thoroughly.
- Baths are filled with water first, so the joint is at its widest.
- New mould-resistant silicone goes on and is tooled to a neat finish, including around the taps.
Getting ready for the visit
- Tell us if there are stairs or a lift
- Keep a parking space free if you can
- Have a window or extractor fan available
Getting a price
For a price in Kelmarsh, the easiest route is photos: one close up, one from further back, plus your postcode. You’ll get a fixed quote with dates to choose from.
Advice
Work for landlords and builders
We also carry out snagging repairs for builders and developers, putting right damage done during fitting so nothing needs replacing. We’re CHAS, Constructionline and SafeContractor accredited.
We regularly price jobs from inventory or check-out pictures. You can have a price before you arrange access, and we liaise with tenants about access if you’d like us to.
Should I try a DIY kit first?
You can buy a DIY kit for most repairs, and they can tidy up a tiny mark. The trouble is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair will not last.
If you’re set on a kit, follow its instructions closely, ensure the area is clean and completely dry, and give it the full curing time. If it fails, we can still put it right.
Kelmarsh questions
Why does my sealant keep going mouldy?
Mostly moisture and poor ventilation. We use mould-resistant silicone, and ventilation helps it last.
Do you hold any accreditations?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
Is there a call-out fee?
Travel is included in the price, and we charge the same wherever you are.
How do I get a price for bath resealing in Kelmarsh?
We give a fixed price from your photos. Send a close-up and a photo of the entire item with your NN6 postcode.
What happens once I’ve sent pictures?
We come back with a fixed quote. There’s no obligation to book.
Can tenants book a repair?
We can work for tenants, landlords or agents. Get your landlord’s agreement first.
Do the materials smell?
Some materials have a smell while they’re applied, which is why we ventilate. It fades as everything cures.
Do I have to be there?
Yes. The technician needs access to the room for the visit, at a time that suits you.
Why it’s worth resealing in Kelmarsh
A professional reseal costs little compared with water damage. It’s a quick job that protects your walls and floors. Rather than charging by the hour, we fix the price before we start. Damage, material and access decide it.
Why book with us
- We come to you, anywhere in the UK
- Fixed prices from your pictures
- Most jobs done in one visit
- Honest advice, even when it means no job
Read our full price list.
What a repair can’t fix
It helps to know what we can’t do:
- Gaps too big for silicone alone
- A flexing bath
- Tiles that move, until they’re refixed
If in doubt, send photos and we will say what we think.
Materials we repair
- Basins & vanity units
- Kitchen worktops & sinks
- Shower trays & enclosures
- Baths
- Wet rooms
Signs you need bath resealing in Kelmarsh
In time, even good sealant discolours particularly in a well-used bathroom. Steam, soap and movement all take their toll.
Most people get in touch after spotting something like this:
- Sealant that’s split or lifting
- Discoloured, yellow sealant
- Damp near the bath
- Black spots in the silicone
Before booking anyone
- How the room is protected while they work
- What happens if they find more damage
- How the colour is matched
- Aftercare advice
Aftercare tips
Aftercare is simple, and it makes a real difference:
- Do not stand toiletries on the seal
- Let steam out after showers
- Replace the seal when mould sets in
- Clean the joints with a mild cleaner
Don’t scrape the sealant with anything sharp, and keep shampoo bottles off the joints.
Do not wait until water gets behind the bath. Gaps or lifting edges mean it needs doing.
About our accreditations · Every repair comes with a one-year guarantee.
