North Somerset · England

Bath & shower resealing (mastic) in Kenn Moor Gate, North Somerset

Our technicians come to Kenn Moor Gate for bath, shower and sink resealing with new mould-resistant silicone. Everything is done in place, with a one-year guarantee.

  • An untidy old seal
  • Mould you cannot clean out
  • Gaps by the taps
Surface Doctor technician refinishing the outside of a roll-top bath

Bath resealing for Kenn Moor Gate homes

How we handle bath resealing in Kenn Moor Gate

Baths, trays, basins and kitchen worktops all get resealed using mould-resistant silicone. A typical reseal takes a couple of hours. We are frequently asked to fix stained silicone and gaps in the seal, on shower trays & enclosures, baths and kitchen worktops & sinks.

You’re covered after we leave: each job carries a one-year guarantee, and we will explain exactly what it covers when we quote.

Surface Doctor technician refinishing the outside of a roll-top bath
Location
Kenn Moor Gate (BS49)
Area hub
North Somerset
Cover
12 months on all our work
Quote
Free, fixed quote from pictures
Phone
0345 017 0787
Last updated
23 October 2026

Questions from Kenn Moor Gate

Which areas do you work in?

We cover the entire UK, including Kenn Moor Gate and the rest of North Somerset. Just include your postcode and we will offer you dates.

How quickly can you book me in?

It depends on the time of year and where you are. Send pictures with your postcode and we’ll reply with the earliest dates.

Will it make a mess?

No. The work area is masked and covered, and we leave the room clean.

My seal keeps tearing. Why?

Movement is the usual cause, or it was sealed with the bath empty. We fill the bath before sealing it.

Can you reseal over the old silicone?

We always remove the old sealant completely. New silicone won’t bond to old.

How long does silicone take to cure?

Generally after around 24 hours. We’ll tell you the exact time.

Do you work for landlords and businesses?

We do, regularly. We quote for multiple addresses and fit around tenancy changeovers.

Does someone need to be in?

Someone needs to let us in and show us the job. You do not need to watch us work.

For landlords and businesses

We work for landlords, letting agents and housing providers in Kenn Moor Gate as well as householders. A repair between tenants keeps the property empty for less time, and it costs much less than replacing.

Builders use us to fix snagging damage before handover, so there’s no need to replace a damaged item at the last minute. Several plots can be done in one visit.

About Kenn Moor Gate

Kenn Moor Gate is about 2 miles south-west of Nailsea, in North Somerset. Anywhere in BS49, we carry out the work at your property. We cover all 86 towns and villages in North Somerset, from the larger towns to small villages.

Postcode districts we cover here: BS49. We also travel to Chelvey (1 mile east), Brockley Elm (1 mile east), Chelvey Batch (2 miles east), Nailsea (2 miles north-east) and Backwell (2 miles east). We also work in nearby towns such as Weston-super-Mare (7 miles south-west), Portishead (6 miles north), Clevedon (3 miles north-west), Milton (7 miles south-west), Worle (6 miles south-west) and Locking (7 miles south-west).

Around Kenn Moor Gate

We visit homes around Court-De-Wyck Church School and Church of St Barnabas and the streets around them. The nearest railway station is Yatton station, roughly 1.6 miles south-west. Other landmarks nearby include North Somerset Community Hospital (3.1 miles north-west). Open spaces near Kenn Moor Gate include Backwell Lake and Cadbury Hill.

Map of Kenn Moor Gate © OpenStreetMap contributors

Repairs by material

Baths

We fill the bath before sealing, to open the joint fully.

Shower trays

We put weight on a tray before sealing it, for the same reason.

The process

We agree an arrival time beforehand, so you know when to expect us. Once we’re there, the work takes around two hours for most jobs. The room is left tidy.

  1. We protect the area and mask the joint lines.
  2. We remove the old sealant and every trace of residue.
  3. We clean, treat and dry the joint.
  4. We run a continuous bead of new silicone.
  5. The bead is smoothed, the tape removed and the seal left to cure.

Getting ready for the visit

  • Mention any parking restrictions or tricky access
  • Point us to the nearest place to park
  • Make sure the room can be ventilated

Getting a price

Pricing is simple: snap the damage close up and then the whole item, send them to us with your postcode, and you’ll get a fixed price back. Quotes are free and no obligation.

Get a free quote

Read more

Resealing in Kenn Moor Gate: why it matters

Resealing is routine maintenance. Putting off a reseal can let water reach the walls and floor, and that damage costs much more to fix. We charge the same wherever you are, so there’s no premium for Kenn Moor Gate. What changes the price is the job itself: how much damage, what it’s made of and how many items.

Why book with us

  • Every repair guaranteed for a year
  • One price list for the entire UK
  • Honest advice, even when it means no job
  • CHAS and Constructionline accredited

See our pricing.

Do you need bath resealing in Kenn Moor Gate?

Black mould is the most common reason people reseal. It grows into the sealant itself, so cleaning only removes the surface.

It’s worth getting a quote if you see:

  • Sealant that’s split or lifting
  • Unsealed corners
  • Black spots in the silicone
  • Leaks at the edges

Questions to ask before booking

  • What the guarantee covers, and for how long
  • Whether cleaning and preparation are in the price
  • Who turns up on the day
  • What aftercare is recommended

Our hiring checklist

When we’d advise against a repair

A few problems are outside what a surface repair can do:

  • Gaps so wide they need filling or trims before sealing
  • Hidden water damage
  • Hollow or loose tiles

If in doubt, send photos and we’ll say what we think.

Materials we repair

  • Shower trays & enclosures
  • Basins & vanity units
  • Wet rooms
  • Kitchen worktops & sinks
  • Baths

How to look after the repair

To keep it looking its best:

  • Clean the joints with a mild cleaner
  • Dry the seal after bathing
  • Use the extractor fan
  • Air the room after use

Use the extractor fan, wipe the joints dry after use, and give them a regular clean with a mild cleaner to slow mould growth.

Reseal before water gets in. Gaps or lifting edges mean it needs doing.

Prices and what affects them

A fixed quote means you know the cost before you book. We take into account:

  • The material and finish
  • How many areas need work
  • How easy the damage is to reach
  • Doing more than one item at once

Instead of hourly rates, we fix the price before we start. Damage, material and access decide it.

Getting a price from photos

A couple of clear pictures is all it takes. Try to include:

  • A picture taken from further back
  • What it’s made of, if you know
  • A close-up of the damage, in focus
  • Any earlier repairs or coatings

The quickest way to a price is to send two or three pictures using our quote form or call us. We will tell you honestly if a repair is the right fix.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.