North Somerset · England
Bath Repair for Kenn Moor Gate homes
We travel to Kenn Moor Gate for chip and crack repairs to enamel, acrylic and cast iron baths. Everything is done in place, with a one-year guarantee.
- Repairs from £95
- A chip where the taps sit
- Rust by the waste and overflow
Signs you need bath repair in Kenn Moor Gate
Most bath damage comes from something dropped: bottles, shower heads, tiles and tools. On enamelled baths, a chip that reaches the metal lets water in, and rust follows.
These are the problems we are asked about most:
- Chips on the rim or sides
- Scratches you can feel with a fingernail
- A chip where the taps sit
- Chips caused by builders
Comparing quotes
- What happens if the damage is worse than the pictures show
- Whether the price is fixed and includes VAT
- How the colour is matched
- Who turns up on the day
Bath repair in Kenn Moor Gate, done in place
A typical bath repair is a few hours’ work, and you can generally bathe again the next day. There is no need to book a plumber or tiler, because nothing is disconnected. We work on cast iron enamel, whirlpool & spa baths and acrylic, and people most frequently call us about impact holes in acrylic and rust spots around the plughole.
We guarantee the work for a year. If there’s a problem with the repair within the year, we return and sort it.
- Where
- Kenn Moor Gate (BS49)
- Area hub
- North Somerset
- Guarantee
- 12 months on all our work
- Quotes
- From £95. Fixed and free, based on photos
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
What affects the price in Kenn Moor Gate
Repairs from £95. There are no hourly rates or hidden extras. The price is based on:
- What kind of damage it is
- Doing more than one item at once
- Access to the area
- How many areas need work
The price depends on how much damage there is and what kind, what it’s made of and how many jobs we combine into one visit. We give a fixed price from your pictures, so there are no surprises on the day.
Quotes from your pictures
Photographing the damage takes a minute. Please include:
- Daylight if possible, and no flash reflection
- A close-up of the damage, in focus
- Your postcode, so we can check dates
- A picture taken from further back
Call 0345 017 0787 or use the quote form. With one close-up and one wider picture, we can price the job without visiting.
Should I try a DIY kit first?
If you do try a kit, read the instructions carefully and work on a clean, dry surface, and do not use it until it has fully cured. If it doesn’t work out, we can still repair it properly.
What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.
Our work in Kenn Moor Gate
Kenn Moor Gate is about 2 miles south-west of Nailsea, in North Somerset. Customers in Kenn Moor Gate get the same service as everywhere else we cover: a fixed price from your photos, then a visit to do the work. Kenn Moor Gate is one of 86 places in North Somerset where we work.
Our visits in BS49 work the same way as everywhere else we cover. Neighbouring places we cover include Chelvey (1 mile east), Brockley Elm (1 mile east), Chelvey Batch (2 miles east), Nailsea (2 miles north-east) and Backwell (2 miles east). We also work in nearby towns such as Weston-super-Mare (7 miles south-west), Portishead (6 miles north), Clevedon (3 miles north-west), Milton (7 miles south-west), Worle (6 miles south-west) and Locking (7 miles south-west).
Local landmarks in Kenn Moor Gate
Our clients here include homes close to Court-De-Wyck Church School and Church of St Barnabas, among other places. The nearest railway station is Yatton station, roughly 1.6 miles south-west of the centre. Nearby you will also find North Somerset Community Hospital (3.1 miles north-west). Green spaces nearby include Backwell Lake and Cadbury Hill.
How to care for the repair
A little care keeps the finish looking good. We recommend:
- Get any new chip repaired before it rusts
- Store metal items away from the bath
- Put a towel in the bath if you’re working above it
- Give the bath a quick rinse after use
For the first few days, keep heavy bottles off the repaired spot. After that, normal gentle cleaning is fine, avoiding abrasives.
Do not leave a chip on a steel or cast iron bath. Once water reaches the metal, rust begins, turning a quick repair into a bigger one.
When we’d advise against a repair
Honesty matters more than a booking, so here’s what a repair won’t do:
- A steel bath rusted through
- Cracks in parts of an acrylic bath we cannot get to from below
- A bath that flexes because its feet or cradle have failed (that needs fixing first)
Send us pictures and we’ll tell you honestly.
Materials we repair
- Roll-top & freestanding
- Acrylic
- Cast iron enamel
- Pressed steel enamel
- Whirlpool & spa baths
Questions from Kenn Moor Gate
What happens if you find more damage?
It’s rare, but if it happens we talk to you first. The price only changes if you agree.
What does bath repair cost?
Repairs from £95. Because every job differs, we price from photos. You know the full cost before anything is booked.
Are there extra charges for Kenn Moor Gate?
No. Our quotes include travel, with the same prices everywhere we work.
Will there be a smell?
There can be some smell while we work, so we ventilate the room. It clears as the materials cure.
Can you repair something that is been repaired before?
Generally, yes. Tell us what was done before.
Can you fix rust around the plughole?
Yes. We take out the rust and any loose enamel, seal and fill the area, then colour-match the finish.
Do you hold any accreditations?
Yes, including CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
When can I have a bath again?
Usually within a day, depending on the repair.
Work for landlords and builders
Letting agents often send us photos straight from the inventory. You can have a price before you arrange access, and we liaise with tenants about access if you’d like us to.
Hotels, guest houses and holiday lets need rooms back in use quickly, so we keep visits short and tidy. We can work around your bookings.
What we do, step by step
Once we are through the door, the aim is to do the job without disturbing the rest of your home. Surfaces nearby are masked off, the job takes a few hours, depending on the damage, depending on what we find, and we finish by cleaning up and talking you through the result.
- We start by cleaning the damage and taking out loose enamel and rust.
- We fill the damage and sand it flush with the surrounding surface.
- We tint the finish on the day to suit your bath’s shade of white or colour.
- We apply the finish coats and polish the repair so it blends in.
- We leave it to cure; you can generally use the bath the next day.
Preparing for the visit
- Tell us about parking, stairs or access
- Clear toiletries, mats and anything else from around the area
- Ensure the area is dry
Get a quote
You do not need a survey visit. Photos are enough for us to price nearly every job: we need a close-up, a wider picture and your postcode, and we will come back to you with a fixed figure.
Advice
Repairing versus replacing in Kenn Moor Gate
For damage in one or two places, a repair is the obvious choice. It costs far less than a new bath plus fitting, it’s done in one visit, and nothing else in the room changes. Repairs from £95, with every job priced individually. The price reflects the work involved, not where you live. You will see the full price before you book, with nothing added on the day.
Why book with us
- Free fixed quotes from pictures
- Straight answers about what a repair can do
- Same prices wherever you are
- A year’s guarantee on all work
Read our pricing and guide to resurfacing and replacement costs.
Also near Kenn Moor Gate
More services for Kenn Moor Gate
About our accreditations · Every repair comes with a one-year guarantee.
