Aberdeen · Scotland

Bath & shower resealing (mastic) in Kingseat, Aberdeen

Bath resealing in Kingseat without the cost of replacing. Send us pictures for a fixed quote, then we come to you.

  • Discoloured, yellow sealant
  • A messy previous reseal
  • Black spots in the silicone
Surface Doctor technician refinishing the outside of a roll-top bath

Bath resealing near Kingseat

When we’d advise against a repair

Honesty matters more than a booking, so here’s what a repair cannot fix:

  • Tiles that move, until they’re refixed
  • Gaps too big for silicone alone
  • A bath or tray that moves, until its support is fixed

If in doubt, send photos and we will say what we think.

Surfaces we repair

  • Wet rooms
  • Baths
  • Shower trays & enclosures
  • Kitchen worktops & sinks
  • Basins & vanity units

Bath resealing in Kingseat, done in place

A reseal is a small job that makes a big difference. Clean, white joints make a bathroom look cared for, and they keep water out. We work on kitchen worktops & sinks, basins & vanity units and shower trays & enclosures, and people most often call us about unsealed corners and a messy previous reseal.

Every job is backed for twelve months in Kingseat and everywhere else. If something goes wrong with the work, we come back.

Where
Kingseat (AB21)
Area hub
Aberdeen
Cover
12 months on all our work
Quotes
Fixed and free, based on pictures
Call
0345 017 0787
Last updated
23 October 2026
Surface Doctor technician refinishing the outside of a roll-top bath

Kingseat and the surrounding area

Kingseat is about 8 miles north of Aberdeen, in Aberdeen. Wherever you are in the AB21 postcode area, we come to you. We cover all 63 towns and villages across Aberdeen, from the larger towns to small villages.

All of AB21 is covered. Local streets include Bacchante Way, Kingseat Avenue and Malcolm Crescent, all of which we cover. Close by, we cover Whitecairns (1 mile south-east), Newmachar (1 mile west), Kinmundy (1 mile south-west), Corsehill (2 miles south) and Hill of Keir (3 miles east). We also work in nearby towns such as Aberdeen (8 miles south), Rosemount (8 miles south), Berryden (7 miles south), Ferryhill (9 miles south), New Aberdeen (8 miles south) and Dyce (4 miles south).

Near you in Kingseat

Around Kingseat, we work in homes near Newmachar Church and New Machar Primary School, among other places. The nearest railway station is Dyce station, about 4 miles south of the centre. Further afield, we also cover the area around Kingseat Hospital (within half a mile north). Open spaces near Kingseat include Corby Loch and Badgers' Hill.

Map of Kingseat © OpenStreetMap contributors

What your bath or shower is made of matters

Shower trays

We put weight on a tray before sealing it, for the same reason.

Sinks and worktops

Basins, vanity units and kitchen worktops are resealed too, with the joint fully dried first.

What we’re called out for in Kingseat

A bathroom without good ventilation is hard on sealant: damp hangs around, and mould grows faster.

Clients normally contact us about:

  • Water getting behind the bath or tray
  • Old sealant that looks dirty
  • Black mould in the sealant
  • An untidy old seal

Questions to ask before booking

  • Is the price fixed, and does it include VAT?
  • If travel is included in the price
  • When it can be used again
  • How long the guarantee is and what it covers

How to compare quotes

The process

It’s a tidy, low-fuss visit. We agree the arrival time in advance, cover and mask the work area, and get on with the job, which generally takes about two hours for a bath. If we find something your photos didn’t show, we will explain it before carrying on.

  1. The surrounding area is protected and the joints masked.
  2. Old sealant and residue are removed.
  3. The joint is cleaned, treated and dried.
  4. Fresh silicone is applied in a continuous bead.
  5. The bead is smoothed, the tape removed and the seal left to cure.

Before we arrive

  • Tell us about parking, stairs or access
  • Clear the area around the damage
  • Keep children and pets away from the room on the day

Ask for a price

The quickest way to a price is to send a couple of photos through our quote form or call us. We’ll say straight away whether it can be repaired.

Send photos for a quote

Advice

Can I fix it myself?

What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.

For a hairline mark somewhere you will never see, a kit may be enough. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.

For landlords and businesses

We regularly price jobs from inventory or check-out pictures. You can have a price before you arrange access, and we liaise with tenants about access if you’d like us to.

If you manage property in Kingseat, we can repair and quote for several addresses together. Just send photos for each address and we’ll price them together.

How we price bath resealing

Each job gets its own fixed quote. This is what makes a difference:

  • Where the damage is and how we get to it
  • Whether old repairs or coatings need taking off
  • What kind of damage it is
  • The material and finish

The price reflects the work involved, not your postcode. You’ll see the full price before booking.

How to get a fixed quote

You can typically get a fixed price without us visiting. To make it quick:

  • Your postcode, so we can check dates
  • A coin or ruler next to the damage for scale
  • Any earlier repairs or coatings
  • Daylight if possible, and no flash reflection

Getting a price is easy: snap the damage close up and then the entire item, send them over with your postcode, and you will get a fixed quote back. Quotes are free and you’re under no obligation.

Looking after it afterwards

Nothing complicated is needed, just a few sensible habits:

  • Use the extractor fan
  • Air the room after use
  • Give the seal a regular clean
  • Reseal at the first sign of lifting

Run the extractor fan, wipe the joints dry after use, and clean them regularly with a mild cleaner to slow mould growth.

Reseal before water gets in. Gaps or lifting edges mean it needs doing.

Your questions about bath resealing in Kingseat

Do I need to be at home?

Someone needs to let us in and show us the job. After that, you can carry on with your day.

When can you do it?

Your quote comes with available dates. If it’s urgent, say so and we will do what we can.

Do you hold any accreditations?

Yes, including CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.

When can I use the bath after resealing?

We will give you the curing time, typically around a day.

What areas do you cover?

We cover the entire UK, including Kingseat and the rest of Aberdeen. Send your postcode with your pictures and we’ll offer you dates.

Is there a guarantee?

Yes: twelve months. If anything goes wrong with the repair within the year, we return to fix it.

What do you need from me?

Use the quote form or ring 0345 017 0787, and we’ll do the rest.

Why does my sealant keep going mouldy?

Damp is the cause. Ventilation and drying keep it clean longer.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.