Shropshire · England
Bath & shower resealing (mastic) in Kingswood, Shropshire
Bath, shower and sink resealing with new mould-resistant silicone for homeowners, landlords and businesses in Kingswood. Send pictures for a free, fixed quote.
- Damp near the bath
- Black spots in the silicone
- Missing sealant behind the taps

Repairs by material
Sinks and worktops
We reseal basins, vanity tops and kitchen worktops, once the joint is completely dry.
Baths
Baths are resealed with water in them, to open the joint fully.
Bath resealing in Kingswood, done in place
A reseal is a small job that makes a big difference. Fresh joints make the whole room look cleaner, and they protect the walls and floor. Whether it’s sealant that’s split or lifting and silicone smeared on tiles, we can help, on wet rooms, baths and kitchen worktops & sinks alike.
The work is guaranteed for twelve months. If there’s a problem with the repair within the year, we return and sort it.

- Area
- Kingswood (WV7)
- Area hub
- Shropshire
- Guarantee
- A year, on every repair
- Quotes
- Free and fixed, from your photos
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
Why it’s worth resealing in Kingswood
Resealing costs very little and protects the walls and floor. Leaving failed sealant can let water cause damage that costs far more to fix. We charge the same wherever you are, so there’s no premium for Kingswood. The job itself decides the price: how much damage, what it’s made of and how many items.
What you get with us
- We’ll tell you if it’s not worth repairing
- No extra charge for your area
- A fixed quote before you book
- One-year guarantee on every repair
Take a look at our pricing.
Aftercare tips
Good habits make a big difference to how long a repair lasts:
- Keep the joints dry
- Replace the seal when mould sets in
- Do not stand toiletries on the seal
- Ventilate the bathroom well
Don’t scrape the sealant with anything sharp, and don’t stand bottles on the seal.
Black mould in sealant is not just unsightly, it’s a sign moisture is sitting in the joint. An early reseal keeps water where it belongs.
Kingswood and the surrounding area
Kingswood is about 5 miles north-west of Wolverhampton, in Shropshire. Book a date that suits you, and we’ll give you an arrival time in advance, so there is no waiting around. Kingswood is one of 433 towns and villages in Shropshire we cover. We work right across the region, from Kingswood to Birmingham (about 18 miles away).
All of WV7 is within our area. That includes homes on Newport Road, County Lane and Holyhead Road and the roads around them. Neighbouring places we cover include Oaken (1 mile east), Boningale (1 mile west), Codsall Wood (1 mile north-east), Albrighton (2 miles north-west) and Donington (2 miles north-west). Within a short drive, we also cover Madeley (9 miles west), Bridgnorth (10 miles south-west), Shifnal (6 miles north-west), Broseley (10 miles west), Much Wenlock (13 miles west) and Highley (13 miles south-west).
What’s near Kingswood
Our clients here include homes close to Codsall Community High School. The closest station to Kingswood is Albrighton station, about 1.5 miles north-west. Well-known places in the area include Tettenhall Transport Heritage Centre (3.8 miles south-east) and RAF Hospital Cosford (2.7 miles north-west).
What we’re called out for in Kingswood
In time, even good sealant discolours. Steam, soap and movement all take their toll.
Send us a picture if you notice any of these:
- Missing sealant behind the taps
- Black spots in the silicone
- Leaks at the edges
- Old sealant that looks dirty
Before booking anyone
- Whether cleaning and preparation are in the price
- When it can be used again
- How the room is protected while they work
- Whether the price covers travel
Prices and what affects them
Each job gets its own fixed quote. This is what makes a difference:
- Any earlier repairs that need removing first
- How much damage there is
- How easy the damage is to reach
- The type of damage
A repair typically costs much less than people expect, particularly next to the cost of replacement. Send photos and we will give you the exact figure.
Send photos for a quote
Phone photos are fine, there’s no need for anything special. Make sure they show:
- Daylight if possible, and no flash reflection
- One picture of the whole bath or shower
- A coin or ruler next to the damage for scale
- Whether it’s been repaired or coated before
Pricing is simple: snap the damage close up and then the whole item, send them over with your postcode, and we will reply with a fixed price. There is no charge for the quote and no obligation.
Should I try a DIY kit first?
Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is generally cheaper.
For a hairline mark somewhere you’ll never see, a kit may be enough. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.
Kingswood questions
What if the damage is worse than the pictures show?
We stop, show you and agree any change before carrying on. Nothing extra is done without your say-so.
Why does the silicone keep cracking?
Generally because the bath or tray moves. We seal baths full of water.
It’s been repaired before. Can you still fix it?
Generally, yes. Let us know what was used before and we’ll plan for it.
Do I have to be there?
Someone needs to let us in and show us the job. After that, you can carry on with your day.
How do I get a price for bath resealing in Kingswood?
Because every job differs, we price from photos. You know the full cost before anything is booked.
Do you cover the entire of Shropshire?
Across the UK, so Kingswood is covered. Prices don’t change with location.
Is it safe with children and pets around?
Yes, as long as they stay out of the room we are working in. We’ll let you know when it’s safe to use again.
Do you work for landlords and businesses?
Yes. We carry out repairs for homeowners, landlords, letting agents, builders and businesses across Shropshire.
Places near Kingswood
Also in Kingswood
What we do, step by step
Expect a friendly, tidy visit. We confirm the time with you beforehand, protect the area, and get on with the job, which normally takes about two hours for a bath. If anything looks different from your photos, we’ll talk to you before going ahead.
- We cut out all of the old sealant.
- Residue is removed and the joint cleaned.
- We treat mould and dry the joint thoroughly.
- The bath is filled with water, or weight put on the tray.
- We apply fresh mould-resistant silicone and tool a neat bead.
Before we arrive
- Plan for the room to be out of bounds to pets and children
- Let us know about parking or access
- Let the surface dry out before the visit
Ask for a price
Call 0345 017 0787 or use the quote form. With one close-up and one wider picture, we can price the job.
Advice
Work for landlords and builders
Rented homes see more wear and tear, and replacing items every time a tenant leaves is expensive. Repairing between tenants keeps the property presentable for less.
For anyone letting property in or around Kingswood, we can repair and quote for several addresses together. Just send photos for each address and we will price them together.
About our accreditations · Every repair comes with a one-year guarantee.

