Essex · England
Bath & shower resealing (mastic) in Langford, Essex
Bath resealing in Langford without the cost of replacing. Get a fixed price from your photos, then book a visit.
- A messy previous reseal
- Sealant that is split or lifting
- Discoloured, yellow sealant
Can I fix it myself?
What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.
You can buy a DIY kit for most repairs, and they can make a small mark look better. The trouble is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair will not last.
About our bath resealing in Langford
A proper reseal starts with removing every trace of the old silicone. Fresh sealant doesn’t stick to old, which is why many DIY jobs peel. If you are dealing with mould you can’t clean out and water getting behind the bath or tray, we can generally put it right.
The work is covered for a year after we finish. If anything isn’t right, ring us and we’ll sort it.
- Where
- Langford (CM9)
- Area hub
- Essex
- Cover
- 12 months on all our work
- Price
- Free and fixed, from your photos
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
Is resealing worth it?
Resealing costs very little. Failed sealant can lead to water damage that is much more expensive. The price depends on the type and amount of damage, what it’s made of and how many jobs we combine into one visit. You get a fixed quote from your pictures, so you know the cost before booking.
What you get with us
- We come to you, anywhere in the UK
- No extra charge for your area
- Honest advice, even when it means no job
- We leave the room as we found it
See our full price list.
Places near Langford
Also in Langford
What a repair cannot fix
Not everything can be repaired, and we would rather say so up front. We cannot fix:
- Movement in the bath or tray
- Hidden water damage
- Gaps so wide they need filling or trims before sealing
If in doubt, send photos and we will say what we think before booking.
What we work on
- Kitchen worktops & sinks
- Shower trays & enclosures
- Wet rooms
- Basins & vanity units
- Baths
The process
Expect a friendly, tidy visit. We agree the arrival time in advance, protect the area, then carry out the work, which normally takes about two hours for a bath. If anything looks different from your pictures, we will talk to you before going ahead.
- We cut out and remove all of the old sealant.
- We clean the joint and treat any mould.
- The joint is dried thoroughly.
- Baths are filled with water first, so the joint is at its widest.
- We run a new bead of mould-resistant silicone and smooth it neatly, taps included.
Before we arrive
- Make sure the area is dry
- Have somewhere for us to park nearby if possible
- Mention any earlier repairs or resurfacing
Get a quote
Email us pictures of the damage and one of the whole item, with your CM9 postcode, and we will reply with a fixed quote.
Advice
Landlord and trade work in Langford
If you manage property in Langford, we will quote for several properties at once. Just send pictures for each address and we will come back with a combined price.
We regularly work with letting and managing agents. Just send pictures, the address and how to get access and we will arrange it.
How to look after the repair
Once the work has cured, treat it gently:
- Open a window after bathing
- Keep bottles off the joints
- Clean the sealant gently and regularly
- Use the extractor fan
Avoid scraping the joints, and keep shampoo bottles off the joints.
If you notice damp, stains on the ceiling below or loose tiles, act quickly. There may be more going on, so we will tell you if it needs a builder or plumber.
Your questions about bath resealing in Langford
Do you charge for travel?
No. Our quotes include travel, with the same prices everywhere we work.
Is there any odour?
Some materials have a smell while they’re applied. It fades as everything cures.
It’s been repaired before. Can you still fix it?
Most of the time. Tell us what was done before.
What do you need from me?
A close-up, a wider photo and your postcode. Then we will agree a date.
Why does my sealant keep going mouldy?
Generally poor ventilation and moisture sitting on the joint. We use mould-resistant silicone, and ventilation helps it last.
How long before I can shower?
Normally after around 24 hours. We’ll tell you the exact time.
Do you cover the whole of Essex?
The entire UK, including all of Essex. Send your postcode with your pictures and we’ll confirm dates.
I’m a tenant. Can you help?
Yes, though it’s best to check with your landlord first. Landlords are often glad to have it sorted.
Our work in Langford
Langford is about 2 miles north-west of Maldon, in Essex. We visit homes and businesses in Langford and the surrounding area, so nothing has to leave your home. Langford is one of 644 towns and villages in Essex we cover. We work right across the region, from Langford to London (about 37 miles away).
We cover every part of CM9 and the streets around it. We regularly work on streets such as Witham Road, Maldon Road and John Thresh Way. Other places close to Langford include Heybridge (1 mile south-east), Broad Street Green (1 mile east), Curling Tye Green (2 miles south-west), Maldon (2 miles south-east) and Great Totham (2 miles north-east). We also work in nearby towns such as Colchester (14 miles north-east), Chelmsford (8 miles west), Basildon (15 miles south-west), Braintree (10 miles north-west), Billericay (13 miles south-west) and Rayleigh (11 miles south).
Near you in Langford
Locally, our jobs take us to homes close to Plume School, Church of St Giles and Plume Library and the streets around them. Langford’s nearest station is Hatfield Peverel station, roughly 3.5 miles north-west. For a walk, there’s Maldon Wick.
Prices and what affects them
Each job gets its own fixed price. These are the things that affect it:
- The colour and finish to match
- Whether we combine several jobs
- Where the damage is and how we get to it
- Whether old repairs or coatings need taking off
Every job is a little different, so we price each one individually. The size and type of damage, the material and access all make a difference, and doing several things on one visit costs less than separate visits.
How to get a fixed price
Good photos mean an accurate price. Here’s what we find most useful:
- A wider photo showing the entire bath or shower
- Your postcode, so we can check dates
- A close-up of the damage, in focus
- Whether it’s been repaired or coated before
Getting a quote takes a couple of minutes: photograph the damage, then the whole bath or shower, add your postcode and send them to us. You will get a fixed price, not an estimate.
Do you need bath resealing in Langford?
Sealant does not last forever. Every bath or shower adds moisture and soap residue, which mould feeds on, and the joint moves slightly every time the bath is filled.
You may need us if you’ve spotted:
- Water getting behind the bath or tray
- Black spots in the silicone
- Unsealed corners
- A messy previous reseal
Before you book anyone
- What preparation is included
- What happens if they find more damage
- Is the price fixed, and does it include VAT?
- Whether a trained technician does the job
About our accreditations · Every repair comes with a one-year guarantee.
