Norfolk · England
Bath Resealing in Limpenhoe
Bath resealing for Limpenhoe, without a refit. Get a fixed quote from your pictures, then we come to you.
- Stained silicone
- An untidy old seal
- Gaps by the taps
Aftercare tips
How the surface is treated afterwards matters:
- Reseal at the first sign of lifting
- Ventilate the bathroom well
- Open a window after bathing
- Don’t stand toiletries on the seal
Avoid scraping the joints, and keep shampoo bottles off the joints.
Damp below or loose tiles need checking quickly. There may be more going on, and we’ll say if you need a builder or plumber.
About our bath resealing in Limpenhoe
We cut out all of the old sealant, treat any mould, and apply fresh mould-resistant silicone. We do this for baths, showers, sinks and worktops, including the awkward bits behind the taps. We’re frequently asked to fix stained silicone and black spots in the silicone, in baths, shower trays & enclosures and wet rooms.
A one-year guarantee comes as standard, so you’re covered after the visit.
- Area
- Limpenhoe (NR13)
- Area hub
- Norfolk
- Guarantee
- 12 months on all our work
- Quotes
- Free and fixed, from your pictures
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
Why it’s worth resealing in Limpenhoe
Resealing is routine maintenance. Putting off a reseal lets water get behind the bath or tray, which costs far more to put right. Every job is a little different, so we price each one individually. What’s damaged, how badly and how easy it is to reach all make a difference, and combining jobs on one visit brings the cost down.
Why book with us
- We come to you, anywhere in the UK
- No need to remove anything
- Rooms protected and left tidy
- Same prices wherever you are
Take a look at our full price list.
The process
Expect a friendly, tidy visit. We confirm the time with you beforehand, protect the area, then carry out the work, which typically takes around two hours. If we find something your pictures didn’t show, we will explain it before carrying on.
- The surrounding area is protected and the joints masked.
- Old sealant and residue are removed.
- The joint is cleaned, treated and dried.
- Fresh silicone is applied in a continuous bead.
- The bead is smoothed, the tape removed and the seal left to cure.
Getting ready for the visit
- Keep pets and children out of the room while we work
- Ensure the room can be ventilated
- Point us to the nearest place to park
Getting a price
Call 0345 017 0787 or use the quote form. With one close-up and one wider picture, we can give you a fixed quote the same day in most cases.
Advice
Landlord and trade work in Limpenhoe
For developers and builders, we fix damage before handover. We can visit several plots in one trip.
We carry out planned and one-off repairs for housing associations and facilities teams. A repair avoids taking out and refitting, which matters when someone is living in the home.
Covering Limpenhoe
Limpenhoe is about 8 miles west of Gorleston-on-Sea, in Norfolk. We agree a date that works for you, and you will know when to expect us, so there’s no waiting around. We cover all 797 towns and villages across Norfolk.
All of NR13 is covered, from the main roads to the quietest streets. Local streets include Church Road, Well Road and Freethorpe Road. Other places close to Limpenhoe include Freethorpe (1 mile north-east), Cantley (1 mile west), Reedham (2 miles south-east), Wickhampton (2 miles north-east) and Hardley Street (2 miles south-west). Larger places within reach include Norwich (11 miles west), Great Yarmouth (8 miles east), Gorleston-on-Sea (8 miles east), Sprowston (10 miles north-west), Thorpe St Andrew (9 miles north-west) and Southtown (8 miles east).
Landmarks near Limpenhoe
Locally, our jobs take us to homes close to Freethorpe Community Primary and Nursery School, Church of St Botolph and Reedcutter pub. The closest station to Limpenhoe is Cantley station, roughly 0.9 miles west. Further afield, we also cover the area around Strumpshaw Hall Steam Museum (3.6 miles north-west) and Claxton Castle (3.8 miles west). For a walk, there is Buckenham Marshes RSPB reserve.
DIY repairs versus a professional job
We understand the appeal of fixing it yourself. The risk is that a kit repair hides the damage for a while, then fails, and then the old filler has to be removed first.
If you’re set on a kit, follow its instructions closely, make sure the area is clean and completely dry, and don’t use it until it has fully cured. If it doesn’t work out, we can still repair it properly.
What a repair cannot fix
We would rather lose a job than do one that won’t last, so here’s what a repair can’t put right:
- Loose tiles, which need refixing first
- A flexing bath
- Rotten walls or floors behind the bath
Send us pictures and we will tell you honestly.
What we work on
- Wet rooms
- Basins & vanity units
- Shower trays & enclosures
- Baths
- Kitchen worktops & sinks
Limpenhoe: your questions answered
How do I stop mould in sealant?
Damp is the cause. Ventilation and drying keep it clean longer.
What happens if you find more damage?
If we find something the photos didn’t show, we explain it first. You decide whether to go ahead.
How long does resealing take?
Most reseals take about two hours. Leave it to cure before use.
Do you work for landlords and businesses?
Yes. We carry out repairs for homeowners, landlords, letting agents, builders and businesses.
Do you hold any accreditations?
We’re accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
Can you do more than one item on the same visit?
Yes. Doing several items on one visit generally costs less than separate visits. Include pictures of each item.
Is it safe with children and pets around?
We ask you to keep children and pets out of the room while we work and until it has cured. Everywhere else in the home is fine.
Why does my sealant keep splitting?
The bath or tray is probably flexing. If it keeps happening, the support may need fixing.
Materials and what they mean for the repair
Shower trays
Trays are sealed with weight on them, so the joint is at its widest.
Sinks and worktops
We reseal basins, vanity tops and kitchen worktops, once the joint is completely dry.
Towns and villages near Limpenhoe
More services for Limpenhoe
What affects the price in Limpenhoe
We do not charge extra for travel to Limpenhoe. The price depends on:
- The type of damage
- Previous DIY repairs that have to come out
- Access to the area
- Whether we combine several jobs
Compared with replacing, repairing typically costs far less, because there is no removal, plumbing or making good. The quote lists exactly what you’re paying for.
How to get a fixed quote
A couple of clear pictures is all it takes. Try to include:
- A close-up of the damage, in focus
- Good light, ideally daylight, without flash glare
- Whether it’s been repaired or coated before
- Your postcode, so we can check dates
Most clients in Limpenhoe get their price from photos. Tell us what happened and where you are, and we will reply with a fixed quote and the earliest dates we have.
About our accreditations · Every repair comes with a one-year guarantee.
