Perth and Kinross · Scotland
Bath & shower resealing (mastic) in Little Ballinluig, Perth and Kinross
Bath, shower and sink resealing with new mould-resistant silicone for homeowners, landlords and businesses in Little Ballinluig. Send pictures for a free, fixed quote.
- Sealant that’s split or lifting
- Damp near the bath
- A messy previous reseal
Is resealing worth it?
Resealing costs very little, and it protects everything around the bath. Leaving failed sealant can let water cause damage that costs far more to fix. We do not add extras on the day. The price we quote from your pictures is the price you pay, and if the damage turns out to be different, we discuss it before starting.
Why book with us
- One price list for the whole UK
- Usually one visit, start to finish
- Repair technicians who travel to you, UK-wide
- Dust sheets down, tidy finish
Take a look at our prices page.
How we handle bath resealing in Little Ballinluig
We reseal baths, shower trays, basins and worktops using mould-resistant silicone. Most jobs take a couple of hours. If you are dealing with black spots in the silicone and unsealed corners, we can help.
A one-year guarantee comes as standard, so you’re covered after the visit.
- Area
- Little Ballinluig (PH15)
- Region
- Perth and Kinross
- Cover
- A year, on every repair
- Quotes
- Fixed and free, based on pictures
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
What bath resealing costs
Prices are worked out job by job. What matters most is:
- What the surface is made of
- Any earlier repairs that need removing first
- What kind of damage it is
- The colour and finish to match
The price depends on how much damage there is and what kind, the material and how many jobs we combine into one visit. You get a fixed quote from your photos, so there are no surprises on the day.
Getting a price from pictures
It only takes a minute to photograph the damage. Please include:
- Your postcode, so we can check dates
- Daylight if possible, and no flash reflection
- One sharp close-up of the damage
- Details of any past repairs
Send us photos of the damage and a wider shot of the entire item, and tell us you’re in Little Ballinluig, and we will come back with a fixed quote.
The process
Here’s how a visit generally runs: we arrive at the agreed slot, protect everything around the work area, do the job and clear up. Allow a couple of hours from start to finish. Before we go, we’ll explain how long to leave it and how to look after it.
- The old silicone is cut out completely.
- We remove the residue and clean the joint.
- Any mould is treated and the joint dried.
- The bath is filled with water, or weight put on the tray.
- New mould-resistant silicone is applied and tooled neatly.
Preparing for the visit
- Move bottles, mats and clutter away from the area
- Mention any parking restrictions or tricky access
- Tell us if there are stairs or a lift
How to get a price
Getting a quote takes a couple of minutes: photograph the damage, then the whole bath or shower, add your postcode and send them over. You will get a fixed quote, not an estimate.
Related advice
Your questions about bath resealing in Little Ballinluig
Can you do more than one item on the same visit?
Yes. Doing several items on one visit usually costs less than separate visits. Include photos of each item.
How long before I can shower?
We’ll give you the curing time, generally around a day.
How soon can you come?
That depends on our diary for your area. Send pictures with your postcode and we will reply with the earliest dates.
Will it make a mess?
We protect the room with dust sheets and masking first, and tidy up before we leave.
Can you redo someone else’s repair?
Usually, yes. The old repair comes out first, so let us know about it.
Will the price change on the day?
Your quote covers the damage in the pictures. Anything extra is discussed before we begin.
I’m a tenant. Can you help?
We can work for tenants, landlords or agents. Just ensure the landlord agrees.
Do you come to Little Ballinluig?
We do. We send a technician to Little Ballinluig for every job, and the price is the same as everywhere else.
Little Ballinluig and the surrounding area
Little Ballinluig is about 17 miles west of Blairgowrie and Rattray, in Perth and Kinross. Jobs in Little Ballinluig are booked in like any other job: a fixed price from your photos, then a visit to do the work. We cover all 107 towns and villages in Perth and Kinross. You can also see our page for Edinburgh, about 54 miles away.
Postcode districts we cover here: PH15. That includes homes on Aultbeag Road and Creag Eilid and the roads around them. Close by, we cover Grandtully (1 mile north-east), Port na Craig (4 miles north-east), Logierait (4 miles east), Aberfeldy (4 miles south-west) and Pitlochry (4 miles north-east).
Near you in Little Ballinluig
Typical jobs here are in homes near Strathtay Parish Church, among other places. The nearest railway station is Pitlochry station, roughly 3.8 miles north-east. Nearby you will also find Tom na Croiche (4 miles east) and Pitlochry Community Hospital (3.7 miles north-east). Open spaces near Little Ballinluig include Loch na Bà.
Nearby places to Little Ballinluig
Other services in Little Ballinluig
Work for landlords and builders
Letting agents frequently send us pictures straight from the inventory. You can have a price before you arrange access, and we can arrange access with the tenant directly if that helps.
We’re used to working with agents and managing companies. Send the address, pictures and access details and we’ll handle the rest.
Keeping it looking good
Good habits make a big difference to how long a repair lasts. Here’s what we suggest:
- Ventilate the bathroom well
- Open a window after bathing
- Wipe the joints dry after use
- Keep bottles off the joints
Let it cure fully before using the bath or shower, generally around 24 hours.
Black mould in sealant isn’t just unsightly. Resealing early keeps water out of the walls and floor.
Signs you need bath resealing in Little Ballinluig
Sealant splits when the bath or tray moves, frequently because it was sealed while the bath was empty.
The most common problems we’re called about are:
- Gaps by the taps
- An untidy old seal
- Black spots in the silicone
- Discoloured, yellow sealant
What to look for in a quote
- How long the guarantee is and what it covers
- When it can be used again
- Whether there are any call-out or travel charges
- What preparation is included
When a repair isn’t the answer
A few problems are outside what a surface repair can do:
- A flexing bath
- Tiles that move, until they’re refixed
- Hidden water damage
Not sure? Send photos and we will give you a straight answer.
Surfaces we repair
- Shower trays & enclosures
- Kitchen worktops & sinks
- Basins & vanity units
- Wet rooms
- Baths
DIY repairs versus a professional job
For a hairline mark somewhere you will never see, a kit may be enough. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.
Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is normally the cheaper route.
About our accreditations · Every repair comes with a one-year guarantee.
