Perth and Kinross · Scotland

Bath & shower resealing (mastic) in Logierait, Perth and Kinross

Bath resealing across Logierait and nearby, done in a single visit in most cases and guaranteed for a year.

  • Black spots in the silicone
  • Gaps in the seal
  • Discoloured, yellow sealant
Surface Doctor technician refinishing the outside of a roll-top bath

Trusted bath resealing in Logierait

Bath resealing in Logierait without replacing anything

A reseal is a small job that makes a big difference. Fresh joints make the whole room look cleaner, and they protect the walls and floor. Whether it’s an untidy old seal and black mould in the sealant, we can help.

We stand behind the work with a one-year guarantee, so you are not left on your own once we have gone.

Location
Logierait (PH9)
Region
Perth and Kinross
Guarantee
A year, on every repair
Quotes
Free, fixed price from pictures
Telephone
0345 017 0787
Page updated
23 October 2026
Roll-top bath being refinished by a Surface Doctor technician

Questions from Logierait

Can landlords book you?

We do, regularly. We can quote for several properties together and work between tenancies.

Can you quote from photos?

Nearly always. If pictures do not show enough, we will ask for another angle.

Do you seal over the old sealant?

No, we never seal over old silicone. It’s removed, cleaned off and the joint dried first.

Is it safe with children and pets around?

Please keep children and pets out of the room during the visit and until it has cured. Everywhere else in the home is fine.

I rent my home. Can I book you?

We can work for tenants, landlords or agents. Get your landlord’s agreement first.

How soon can you come?

Your quote comes with available dates. If it’s urgent, say so and we’ll do what we can.

Is there any odour?

Expect a mild smell while we are working.

What information do you need?

A close-up, a wider photo and your postcode. Then we’ll agree a date.

How the visit works

From the moment we arrive, we keep the work contained to the one room. We mask off everything nearby, the job takes around two hours, and we finish by cleaning up and talking you through the result.

  1. The old silicone is cut out completely.
  2. Residue is removed and the joint cleaned.
  3. We treat mould and dry the joint thoroughly.
  4. We fill the bath, or weight the tray, to open the joint.
  5. New mould-resistant silicone is applied and tooled neatly.

Before we arrive

  • Mention any parking restrictions or tricky access
  • Tell us if there are stairs or a lift
  • Have somewhere for us to park nearby if possible

Getting a price

For a price in Logierait, the easiest route is photos: a close-up, a wider shot and your postcode. You’ll get a fixed quote with dates to choose from.

Get a fixed price

Read more

Landlords, agents and businesses in Logierait

We are used to working with agents and managing companies. Send the address, pictures and access details.

Hotels, guest houses and holiday lets cannot afford rooms out of action for long, so most of our work is done in a single visit. We can work around your bookings.

Logierait and the surrounding area

Logierait is about 14 miles west of Blairgowrie and Rattray, in Perth and Kinross. Book a date that suits you, and you will know when to expect us, so you’re not left waiting in all day. We cover all 107 towns and villages across Perth and Kinross. Our nearest city page is Edinburgh, about 52 miles away.

Jobs in PH9 are booked in the same way as anywhere else. Jobs here include addresses on Clais-an-Deor and Murray Terrace and the roads around them. We also cover the places around Logierait: Ballinluig (1 mile north-east), Dowally (3 miles south-east), Grandtully (4 miles west), Little Ballinluig (4 miles west) and Port na Craig (4 miles north-west). We also work in nearby towns such as Blairgowrie and Rattray (14 miles east), Rattray (14 miles east), Aberfeldy (7 miles west), Stanley (14 miles south-east) and Bankfoot (12 miles south-east).

What’s near Logierait

Our customers here include homes close to Logierait Parish Church and the streets around them. The nearest railway station is Pitlochry station, roughly 4.3 miles north-west. Further afield, we also cover the area around Tom na Croiche (under half a mile north-east) and Pitlochry Community Hospital (4.3 miles north-west). For a walk, there is Loch Skiach.

Map of Logierait © OpenStreetMap contributors

Prices and what affects them

You’ll know the full cost before booking. We look at:

  • What the surface is made of
  • What kind of damage it is
  • The size and number of damaged areas
  • Whether old repairs or coatings need taking off

Compared with replacing, repairing usually costs far less, because there’s no removal, plumbing or making good. Your fixed quote shows exactly what’s included.

How to get a fixed price

A couple of clear pictures is all it takes. Try to include:

  • Whether it’s been repaired or coated before
  • One picture of the whole bath or shower
  • Something in shot to show the size
  • The postcode, so we can plan the visit

Call 0345 017 0787 or use the quote form. With a clear picture of the damage and one of the entire bath or shower, we can price the job without visiting.

DIY kit or professional repair?

A DIY attempt is not a disaster. We remove the old filler and start again, so it will not stop us repairing it. Just mention it when you send photos, as it can add time.

You can buy a DIY kit for most repairs, and they can make a small mark look better. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair won’t last.

What your bath or shower is made of matters

Sinks and worktops

We reseal basins, vanity tops and kitchen worktops, with the joint fully dried first.

Shower trays

We put weight on a tray before sealing it, for the same reason.

How to look after the repair

So the finish stays in good condition for years:

  • Open a window after bathing
  • Clean the joints with a mild cleaner
  • Keep the joints dry
  • Run the extractor fan during and after showers

Run the extractor fan, wipe the joints dry after use, and give them a regular clean with a mild cleaner to slow mould growth.

Reseal before water gets in. Gaps or lifting edges mean it needs doing.

What a repair cannot fix

We’d rather lose a job than do one that won’t last, so these are the limits:

  • Hollow or loose tiles
  • Rotten walls or floors behind the bath
  • A bath or tray that moves, until its support is fixed

Send us photos and we’ll tell you honestly before booking.

Materials we repair

  • Shower trays & enclosures
  • Wet rooms
  • Kitchen worktops & sinks
  • Basins & vanity units
  • Baths

Do you need bath resealing in Logierait?

Joints split if the bath or tray moves, frequently because it was sealed with the bath empty.

The most common problems we’re called about are:

  • Mould you can’t clean out
  • Gaps by the taps
  • Damp near the bath
  • Stained silicone

What your quote should include

  • How long it needs to cure
  • What prep work is covered
  • What happens if the damage is worse than the pictures show
  • Whether a trained technician does the job

Our hiring checklist

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.