Hampshire · England

Bath Resealing for Little Holbury homes

Bath, shower and sink resealing with new mould-resistant silicone at your home in Little Holbury, with a one-year guarantee on every repair.

  • A messy previous reseal
  • Leaks at the edges
  • Sealant that’s split or lifting
Surface Doctor technician refinishing the outside of a roll-top bath

Need bath resealing in Little Holbury?

Bath resealing at your home in Little Holbury

We reseal baths, shower trays, basins and worktops. A typical reseal takes a couple of hours. We work on shower trays & enclosures, kitchen worktops & sinks and wet rooms, and the jobs we see most are an untidy old seal and unsealed corners.

We guarantee the work for a year. If something is not right in that time, we come back and put it right.

Location
Little Holbury (SO45)
County
Hampshire
Warranty
12 months on all our work
Price
Free and fixed, from your photos
Telephone
0345 017 0787
Page updated
23 October 2026
Surface Doctor technician refinishing the outside of a roll-top bath

What we can’t put right

We will always be straight with you, so here’s what a repair won’t do:

  • Tiles that move, until they’re refixed
  • Water damage behind the bath that needs a builder
  • Gaps so wide they need filling or trims before sealing

If in doubt, send pictures and we’ll say what we think before you book.

What we work on

  • Shower trays & enclosures
  • Wet rooms
  • Basins & vanity units
  • Baths
  • Kitchen worktops & sinks

DIY repairs versus a professional job

A DIY attempt isn’t a disaster. We remove the old filler and start again, so it will not stop us repairing it. Just mention it when you send pictures, as it can add time.

We understand the appeal of fixing it yourself. The trouble is that kit repairs often look fine at first and then fail, and then the old filler has to be removed first.

What happens on the day

On the day itself, there’s little for you to do. Let us in and show us the room, and we will get on with it. Most visits take a couple of hours, including clearing up.

  1. All the old sealant is cut out and removed.
  2. Next we clean the joint and deal with mould.
  3. The joint is dried thoroughly.
  4. Baths are filled with water first, so the joint is at its widest.
  5. New mould-resistant silicone goes on and is tooled to a neat finish, taps included.

Preparing for the visit

  • Have a window or extractor fan available
  • Ensure the area is dry
  • Point us to the nearest place to park

How to get a price

The quickest way to a price is to send two or three photos through our quote form or ring us. We’ll say straight away whether it can be repaired.

Get a fixed price

Advice

Why reseal now?

Resealing costs very little, and it protects everything around the bath. Failed sealant can lead to water damage that is much more expensive. Our prices are the same across the UK, so there is no premium for Little Holbury. The job itself decides the price: how much damage, what it’s made of and how many items.

Why book with us

  • Fixed prices from your pictures
  • A year’s guarantee on all work
  • Everything repaired in place
  • Most jobs done in one visit

Take a look at our prices page.

Questions from Little Holbury

Will there be a smell?

A little, depending on the job. Open windows and an extractor fan help.

How do I get a price for bath resealing in Little Holbury?

The exact price depends on the damage, so we quote from photos. You know the full cost before anything is booked.

Can pets and children be at home?

We ask you to keep children and pets out of the room while we work. The rest of the house is unaffected.

Can you redo someone else’s repair?

Most of the time. Tell us what was done before and we’ll plan for it.

When can you do it?

It depends on the time of year and where you are. Send pictures with your postcode and we will reply with the earliest dates.

Do I have to be there?

We need someone to let us in. You don’t need to watch us work.

Are you accredited?

Yes, including CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.

Do you seal over the old sealant?

We always remove the old sealant completely. Fresh silicone doesn’t stick to old.

Common problems we fix in Little Holbury

A bathroom without good ventilation is hard on sealant: moisture sits on the joints longer, and mould grows faster.

Keep an eye out for any of the following:

  • Mould you can’t clean out
  • Stained silicone
  • Water getting behind the bath or tray
  • Unsealed corners

What your quote should include

  • How changes to the job are handled
  • Who turns up on the day
  • How to look after the finish
  • What the guarantee covers, and for how long

10 questions to ask before booking

About Little Holbury

Little Holbury is about 2 miles south of Hythe, in Hampshire. Our work suits any type of property, from flats and terraces to detached houses and new builds, as well as offices, shops and holiday lets. Little Holbury is one of 683 towns and villages in Hampshire where we work. Our jobs stretch from Little Holbury to London (about 73 miles away).

Jobs in SO45 are booked in the same way as anywhere else. That includes homes on Southbourne Avenue, Manor Road and Westbourne Avenue. Other places close to Little Holbury include Holbury (1 mile south-east), Hardley (1 mile north), Roughdown (1 mile south), Blackfield (1 mile south-east) and Frostlane (2 miles north). Larger places within reach include Gosport (10 miles east), Eastleigh (10 miles north), Fareham (8 miles east), Totton (8 miles north-west), Chandler's Ford (11 miles north) and Hedge End (7 miles north-east).

Near you in Little Holbury

Locally, our jobs take us to homes close to The New Forest Academy, The Good Shepherd and Manor Church of England Infant School. The nearest railway station is Netley station, roughly 3.6 miles north-east of the centre. Other landmarks nearby include Beaulieu Abbey And Display Of Monastic Life (2.9 miles west) and Netley Castle (3.3 miles north). Green spaces nearby include Mercury Marshes.

Map of Little Holbury © OpenStreetMap contributors

Aftercare tips

Most damage we see is avoidable. A few tips:

  • Air the room after use
  • Wipe the joints dry after use
  • Reseal when black spots will not clean off
  • Run the extractor fan during and after showers

Use the extractor fan, dry the joints after bathing, and clean them regularly with a mild cleaner to slow mould growth.

Reseal before water gets in. Split or lifting sealant is a sign it’s time.

How we price bath resealing

Each job gets its own fixed quote. These are the things that affect it:

  • How many items we do on one visit
  • Whether it’s a chip, crack, burn or wear
  • How hard the colour is to match
  • Where the damage is and how we get to it

What it costs depends on the type and amount of damage, the material and how many items we do on one visit. We give a fixed quote from your pictures, so you know the cost before booking.

Send pictures for a quote

When you take your pictures, these tips help us give you a firm price:

  • Daylight if possible, and no flash reflection
  • The postcode, so we can plan the visit
  • A coin or ruler next to the damage for scale
  • One sharp close-up of the damage

Getting a quote takes a couple of minutes: take one close-up and one wider shot of the bath or shower, include your postcode and send them over. What comes back is a fixed price, not a guess.

Repairs by material

Sinks and worktops

We reseal basins, vanity tops and kitchen worktops, once the joint is completely dry.

Baths

Baths are resealed with water in them, so the joint is at its widest.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.