Kent · England

Bath & shower resealing (mastic) in Little Mill, Kent

Local bath resealing for Little Mill: a fixed quote from pictures, a tidy visit and a one-year guarantee.

  • Black mould in the sealant
  • A messy previous reseal
  • Old sealant that looks dirty
Surface Doctor technician refinishing the outside of a roll-top bath

Need bath resealing in Little Mill?

Bath resealing in Little Mill, done in place

A good reseal is all about preparation: every bit of old silicone out, mould treated, the joint clean and dry. Only then does the new sealant go on, as one neat, continuous bead. If you’re dealing with a messy previous reseal and gaps in the seal, we can help, on wet rooms, baths and basins & vanity units alike.

Peace of mind is built in: our one-year guarantee applies to every job, and we explain what it covers before you book.

Technician in a mask working on a freestanding roll-top bath
Area
Little Mill (TN12)
County
Kent
Guarantee
A year, on every repair
Price
Fixed and free, based on pictures
Phone
0345 017 0787
Page updated
23 October 2026

What we do, step by step

Arrival times are agreed in advance. Once we’re there, the work takes about two hours for a bath for most jobs. The room is left tidy.

  1. The surrounding area is protected and the joints masked.
  2. Old sealant and residue are removed.
  3. The joint is cleaned, treated and dried.
  4. We run a continuous bead of new silicone.
  5. We smooth the bead, remove the tape and leave it to cure.

Preparing for the visit

  • Make sure the area is dry
  • Keep pets and children out of the room while we work
  • Clear the area around the damage

How to get a price

A quote takes minutes to ask for: take one close-up and one wider shot of the bath or shower, include your postcode and send them to us. What comes back is a fixed price, not a guess.

Send pictures for a quote

Advice

Landlord and trade work in Little Mill

Rental properties take more wear, and replacing items every time a tenant leaves is expensive. A repair between tenancies is a cheaper way to keep the property in good order.

Builders use us to fix snagging damage before handover, so there’s no need to replace a damaged item at the last minute. Several plots can be done in one visit to keep costs down.

What we can’t put right

We will not take on work that will not last, so these are the limits:

  • Rotten walls or floors behind the bath
  • Hollow or loose tiles
  • Very wide gaps that need a trim

If in doubt, send photos and we will say what we think before booking.

Materials we work on in Little Mill

  • Basins & vanity units
  • Kitchen worktops & sinks
  • Wet rooms
  • Baths
  • Shower trays & enclosures

Repairs by material

Baths

We fill the bath before sealing, so the joint is at its widest.

Shower trays

We put weight on a tray before sealing it, for the same reason.

Little Mill and nearby

Little Mill is about 4 miles east of Tonbridge, in Kent. Our work suits any type of property, from flats and terraces to detached houses and new builds, as well as offices, shops and holiday lets. We work in all 922 towns and villages across Kent. Our jobs stretch from Little Mill to London (about 28 miles away).

Every address in TN12 is covered. If you are just outside Little Mill, we cover Snoll Hatch (1 mile east), Barnes Street (1 mile west), East Peckham (1 mile north-east), Golden Green (1 mile west) and Branbridges (1 mile east). We also work in nearby towns such as Maidstone (8 miles north-east), Sevenoaks (9 miles north-west), Royal Tunbridge Wells (7 miles south-west), Gravesend (15 miles north), Tonbridge (4 miles west) and Kings Hill (5 miles north).

Near you in Little Mill

Typical jobs here are in homes near East Peckham Primary School, The Man Of Kent Public House and Church of the Holy Trinity. Little Mill’s nearest station is Beltring station, roughly 1.5 miles east of the centre. Well-known places in the area include Tonbridge Castle (4.2 miles west) and Tonbridge Cottage Hospital (4.6 miles south-west). Green spaces nearby include Tudeley Woods RSPB reserve.

Map of Little Mill © OpenStreetMap contributors

Is resealing worth it?

Resealing is a small job. Leaving split or mouldy sealant lets water get behind the bath or tray, which costs far more to put right. A repair generally costs much less than people expect, especially compared with replacing and refitting. Photos let us give you the exact figure.

Why book with us

  • Everything repaired in place
  • A fixed quote before you book
  • One price list for the entire UK
  • Technicians who travel to you, UK-wide

See our pricing.

Can I fix it myself?

You can buy a DIY kit for most repairs, and they can make a small mark look better. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.

What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.

Little Mill: your questions answered

Why does mould come back so fast?

Mould needs moisture. Ventilation and drying keep it clean longer.

Why does my sealant keep splitting?

The bath or tray is probably flexing. Persistent splitting can mean the support needs attention.

Will it make a mess?

Very little mess: we sheet and mask everything nearby, and we take our waste away with us.

How much does bath resealing cost in Little Mill?

The exact price depends on the damage, so we quote from pictures. You know the full cost before anything is booked.

How quickly can you book me in?

We’ll give you dates with your quote. Tell us if you need it done quickly.

When can I use the bath after resealing?

You’ll get the curing time from us.

Which areas do you work in?

All of Kent, and the rest of the UK. Travel is included in the price.

Is there a call-out fee?

No. Our quotes include travel, and we charge the same wherever you are.

Keeping it looking good

So the finish stays in good condition:

  • Air the room after use
  • Dry the seal after bathing
  • Clean the joints with a mild cleaner
  • Reseal when black spots won’t clean off

Use the extractor fan, dry the joints after bathing, and clean them regularly with a mild cleaner to slow mould growth.

Black mould in sealant is not just unsightly; it shows moisture is getting in. An early reseal keeps water where it belongs.

How we price bath resealing

Quotes are free and the price is fixed. What we take into account:

  • The material and finish
  • The colour and finish to match
  • Whether old repairs or coatings need taking off
  • The size and number of damaged areas

A few things move the price: access, material, the extent of the damage and whether we can do several items together. Send pictures and you’ll get a fixed figure.

Quotes from your photos

You can normally get a fixed quote without us visiting. To make it quick:

  • What it’s made of, if you know
  • A coin beside the damage so we can judge size
  • A wider photo showing the whole bath or shower
  • A close-up of the damage, in focus

For most jobs, pictures are all we need to give you a price. Tell us what happened and where you are, and we’ll send back a fixed quote and some dates.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.