Doncaster · England
Bath Resealing in Loversall
Bath, shower and sink resealing with new mould-resistant silicone for householders, landlords and businesses in Loversall. Free, fixed quotes from your pictures.
- Silicone coming away from the tiles
- Leaks at the edges
- Old sealant that looks dirty
Work for landlords and builders
Rented homes see more wear and tear, and replacing items every time a tenant leaves is expensive. Repairing between tenants keeps the property presentable for less.
We’re used to working with agents and managing companies. Send the address, photos and access details and we will arrange it.
About our bath resealing in Loversall
All of the old sealant is cut out, deal with any mould, and apply fresh mould-resistant silicone. We do this for baths, showers, sinks and worktops, including the awkward bits behind the taps. Typical jobs include gaps by the taps and water getting behind the bath or tray, across baths, shower trays & enclosures and basins & vanity units.
Whatever the size of the job, you get the same one-year guarantee.
- Location
- Loversall (DN11)
- Region
- Doncaster
- Guarantee
- 12 months on all our work
- Quotes
- Free, fixed price from pictures
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
When we would advise against a repair
Honesty matters more than a booking, so here’s what a repair will not do:
- Loose tiles, which need refixing first
- Rotten walls or floors behind the bath
- A flexing bath
Send us pictures and we’ll tell you honestly.
Materials we repair
- Shower trays & enclosures
- Basins & vanity units
- Kitchen worktops & sinks
- Baths
- Wet rooms
DIY kit or professional repair?
If you are set on a kit, follow its instructions closely, ensure the area is clean and completely dry, and don’t use it until it has fully cured. If it fails, we can still put it right.
A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.
Do you need bath resealing in Loversall?
Sealant splits when the bath or tray moves, often because it was sealed with the bath empty.
Look out for any of the following:
- Gaps in the seal
- Silicone smeared on tiles
- Water getting behind the bath or tray
- Old sealant that looks dirty
Before you book anyone
- How your room will be protected
- Aftercare advice
- A fixed price, and whether VAT is included
- Whether cleaning and preparation are in the price
Loversall and the surrounding area
Loversall is about 3 miles south-west of Doncaster, in Doncaster. Whether you are in the middle of Loversall or on the outskirts, the service is the same: fixed prices, tidy work and a one-year guarantee. We cover all 89 towns and villages in Doncaster, from the larger towns to small villages. We work right across the region, from Loversall to Leeds (about 28 miles away).
Every address in DN11 is within our area. Other places close to Loversall include Wadworth (1 mile south), Wilsic (2 miles south), New Edlington (2 miles west), Warmsworth (2 miles north-west) and Old Edlington (3 miles west). We also work in nearby towns such as Doncaster (3 miles north-east), Adwick le Street (7 miles north), Thorne (12 miles north-east), Conisbrough (4 miles west), Bentley (4 miles north) and Armthorpe (5 miles north-east).
What’s near Loversall
In Loversall, that means homes near Carr Lodge Academy, Potteric Carr and Astrea Academy Woodfields and the streets around them. Loversall’s nearest station is Doncaster station, about 2.8 miles north. A little further out are Ashworth Barracks Museum (1.7 miles north-west) and Frenchgate Centre (2.9 miles north). Green spaces nearby include Potteric Carr Nature Reserve.
Is resealing worth it?
Resealing is routine maintenance. Leaving split or mouldy sealant can let water reach the walls and floor, and that damage costs much more to fix. The price depends on the type and amount of damage, what it’s made of and how many jobs we combine into one visit. We give a fixed price from your photos, so you know the cost before booking.
Why book with us
- One-year guarantee on every repair
- A fixed quote before you book
- We come to you, anywhere in the UK
- Same prices wherever you are
See our full price list.
The process
We begin by going over the job with you, so you know exactly what we are doing. Then the area is sheeted and masked and the work begins. It normally takes about two hours for a bath, and we will tell you if anything changes.
- We cut out all of the old sealant.
- Residue is removed and the joint cleaned.
- We treat mould and dry the joint thoroughly.
- We fill the bath, or weight the tray, to open the joint.
- New mould-resistant silicone is applied and tooled neatly.
Getting ready for the visit
- Mention any earlier repairs or resurfacing
- Ensure the room can be ventilated
- Tell us if there are stairs or a lift
How to get a price
To get a price, send a couple of photos through our quote form or ring us. We’ll say immediately whether it can be repaired.
Advice
Nearby places to Loversall
What else we do in Loversall
How we price bath resealing
You’ll know the full cost before you book. We take into account:
- How much damage there is
- Previous DIY repairs that have to come out
- How hard the colour is to match
- What the surface is made of
We charge the same wherever you are, with no extra for Loversall. The job itself decides the price: the material, the amount of damage and how many items.
Quotes from your pictures
The better the pictures, the more accurate the price. Here’s what we find most useful:
- Something in shot to show the size
- Details of any past repairs
- The material, if you know it
- A wider photo showing the whole bath or shower
Ring 0345 017 0787, or send us pictures through the quote form. With a clear picture of the damage and one of the whole bath or shower, we can give you a fixed price the same day in most cases.
Keeping it looking good
How the surface is treated afterwards matters. Here’s what we suggest:
- Clean the joints with a mild cleaner
- Dry the seal after bathing
- Reseal at the first sign of lifting
- Run the extractor fan during and after showers
Leave the sealant to cure for the time we give you, normally around 24 hours.
Reseal before water gets in. Split or lifting sealant is a sign it’s time.
Common questions in Loversall
Is a repair better than a new one?
Typically, if the item is otherwise sound. Repairing avoids the cost and disruption of replacing. We will tell you honestly if replacement makes more sense.
Why does the silicone keep cracking?
Something is moving. If it keeps happening, the support may need fixing.
Can you repair several things at once?
Of course, and it typically saves money. Send pictures of everything together and we’ll quote them together.
How long does silicone take to cure?
You will get the curing time from us, generally around a day.
Do you charge for travel?
We don’t add a call-out fee. Your fixed quote includes everything.
It’s been repaired before. Can you still fix it?
Yes, we frequently do. It can add a little time, which we include in the quote.
Is there a guarantee?
Yes, for a year. If there is a problem with the work in that time, we come back and put it right.
How do I stop mould in sealant?
Damp is the cause. Ventilation and drying keep it clean longer.
About our accreditations · Every repair comes with a one-year guarantee.
