Dorset · England

Bath & shower resealing (mastic) in Lower Coombe, Dorset

Fixed-price bath resealing in Lower Coombe and the surrounding area, done in a single visit in most cases.

  • Black mould in the sealant
  • Old sealant that looks dirty
  • An untidy old seal
Surface Doctor technician refinishing the outside of a roll-top bath

Bath resealing in Lower Coombe

About our bath resealing in Lower Coombe

All of the old sealant is cut out, treat any mould, and apply fresh mould-resistant silicone. We reseal baths, showers, sinks and worktops, including the awkward bits behind the taps. Typical jobs include black mould in the sealant and stained silicone, on kitchen worktops & sinks, shower trays & enclosures and basins & vanity units.

A one-year guarantee comes with the work, just as it does everywhere we cover.

Area
Lower Coombe (SP7)
Region
Dorset
Cover
12 months on all our work
Quotes
Fixed and free, based on photos
Call
0345 017 0787
Updated
23 October 2026
Surface Doctor technician refinishing the outside of a roll-top bath

Repairs by material

Sinks and worktops

Basins, vanity units and kitchen worktops are resealed too, once the joint is completely dry.

Shower trays

We put weight on a tray before sealing it, so the joint is at its widest.

Landlords, agents and businesses in Lower Coombe

For developers and builders, we fix damage before handover, so there is no need to replace a damaged item at the last minute. Several plots can be done in one visit.

Hospitality businesses need rooms back in use quickly, so we keep visits short and tidy. We can work around your bookings.

The process

Visits start with a quick look at the job together, so there are no surprises. After that, protection goes down around the work area and we start. It normally takes around two hours, and we’ll tell you if anything changes.

  1. We cut out and remove all of the old sealant.
  2. Next we clean the joint and deal with mould.
  3. We ensure the joint is completely dry.
  4. We fill a bath with water before sealing so the gap is at its widest.
  5. We apply new mould-resistant silicone and tool it to a neat finish, taps included.

How to prepare

  • Point us to the nearest place to park
  • Let us know which floor the room is on
  • Mention any parking restrictions or tricky access

How to get a price

To get a price, send a couple of pictures through our quote form or ring us. We will tell you honestly whether it can be repaired.

Get a free quote

Read more

When to call us in Lower Coombe

Black mould is the most common reason people reseal. It grows into the silicone, so cleaning cannot get it all out.

It’s worth getting a quote if you see:

  • Leaks at the edges
  • Missing sealant behind the taps
  • Old sealant that looks dirty
  • Black mould in the sealant

Before booking anyone

  • What aftercare is recommended
  • A fixed price, and whether VAT is included
  • Whether there are any call-out or travel charges
  • How changes to the job are handled

Choosing a repair company

How we price bath resealing

Prices are worked out job by job, from your photos. What matters most is:

  • Any earlier repairs that need removing first
  • How easy the damage is to reach
  • How many items we do on one visit
  • What kind of damage it is

There are no surprise extras on the day. What we quote from your pictures is what you pay, and if the damage turns out to be different, we discuss it before starting.

Getting a price from photos

When you take your photos, these tips help us give you a firm price:

  • A wider photo showing the entire bath or shower
  • A close-up of the damage, in focus
  • Any details about the material
  • Any earlier repairs or coatings

No survey visit is needed: we price from pictures. Use the quote form, or ring 0345 017 0787 to talk it through, and we will come back with a fixed figure.

Resealing in Lower Coombe: why it matters

Resealing is routine maintenance. Putting off a reseal can let water reach the walls and floor, which costs far more to put right. Every job is a little different, so each one is priced on its own. The size and type of damage, the material and access all play a part, and combining jobs on one visit brings the cost down.

Why choose Surface Doctor in Lower Coombe

  • One price list for the entire UK
  • Most jobs done in one visit
  • Straight answers about what a repair can do
  • Work done at your home or business

See our full price list.

Covering Lower Coombe

Lower Coombe is about 10 miles north of Blandford Forum, in Dorset. Whether you’re in the middle of Lower Coombe or on the outskirts, we offer exactly the same service: fixed prices, tidy work and a one-year guarantee. We cover all 462 towns and villages across Dorset.

Every address in SP7 is covered, from the main roads to the quietest streets. Neighbouring places we cover include Lillies Green (1 mile north-east), Ludwell (1 mile south-east), Birdbush (1 mile east), Donhead St Mary (1 mile north) and Milkwell (1 mile north-east). We also work in nearby towns such as Blandford Forum (10 miles south), Verwood (15 miles south-east), Gillingham (6 miles west), Peacemarsh (7 miles west), Sturminster Newton (9 miles south-west) and Milborne Port (14 miles west).

Local landmarks in Lower Coombe

Locally, our jobs take us to homes close to St Mary's School, Ludwell Community Primary School and Church of St John the Baptist, among other places. The nearest railway station is Tisbury station, roughly 4.5 miles north-east of the centre. Well-known places in the area include Gold Hill Museum (2.6 miles west) and Westminster Memorial Hospital (2.8 miles west). Not far away are Breeze Hill.

Map of Lower Coombe © OpenStreetMap contributors

Should I try a DIY kit first?

Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is generally the cheaper route.

What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.

Lower Coombe questions

Do the materials smell?

A little, depending on the job. Ventilation keeps it to a minimum.

Can you redo someone else’s repair?

In most cases. We remove the old repair before doing a new one, so let us know about it.

Can tenants book a repair?

Yes, but check with your landlord or agent first. Landlords are often glad to have it sorted.

Can you price it without visiting?

Yes, almost always. Clear pictures let us give you a fixed price without visiting.

Will it make a mess?

Dust sheets and masking go down before we start, and we clean up when we have finished.

Why does the silicone keep cracking?

Movement is the usual cause, or it was sealed with the bath empty. We fill the bath before sealing it.

Do you charge for travel?

Travel is included in the price, with the same prices everywhere we work.

What happens once I’ve sent photos?

You will get a fixed quote back, plus dates. You’re under no obligation.

What a repair can’t fix

We won’t take on work that will not last, so here’s what a repair cannot put right:

  • Rotten walls or floors behind the bath
  • Gaps too big for silicone alone
  • Loose tiles, which need refixing first

Send us photos and we will tell you honestly before you book.

Materials we work on in Lower Coombe

  • Wet rooms
  • Baths
  • Shower trays & enclosures
  • Kitchen worktops & sinks
  • Basins & vanity units
CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.