Somerset · England

Bath Resealing in Lower Marston

Bath resealing in Lower Marston without the cost of replacing. Send us pictures for a fixed price, then book a visit.

  • Unsealed corners
  • Silicone coming away from the tiles
  • Leaks at the edges
Surface Doctor technician refinishing the outside of a roll-top bath

Bath resealing near Lower Marston

DIY repairs versus a professional job

For a hairline mark somewhere you will never see, a kit may be enough. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.

If you are set on a kit, follow its instructions closely, and give it the full curing time. If it does not work out, we can still repair it properly.

About our bath resealing in Lower Marston

The key to a good reseal is getting all of the old silicone out. New silicone won’t bond to old, which is why so many DIY reseals peel. Typical jobs include damp near the bath and mould you can’t clean out, on basins & vanity units, wet rooms and baths.

A one-year guarantee comes as standard, so you’re covered after the visit.

Technician in a mask working on a freestanding roll-top bath
Area
Lower Marston (BA11)
Region
Somerset
Warranty
A year, on every repair
Quote
Fixed and free, based on photos
Call
0345 017 0787
Updated
23 October 2026

Why reseal now?

A reseal is one of the cheapest bathroom jobs there is. Leaving failed sealant can let water cause damage that costs far more to fix. A repair is priced on what needs doing, not your postcode. The full price is agreed before booking, with no extras added later.

What you get with us

  • A fixed quote before you book
  • Usually one visit, start to finish
  • One-year guarantee on every repair
  • We will tell you if it’s not worth repairing

See our full price list.

Prices and what affects them

There’s no charge for travel to Lower Marston. The price comes down to:

  • What the surface is made of
  • Whether old repairs or coatings need taking off
  • The type of damage
  • The size and number of damaged areas

Most people are surprised how affordable a repair is, particularly next to the cost of replacement. Photos let us give you the exact figure.

Getting a price from photos

We price nearly every job from photos. This is what we need:

  • The postcode, so we can plan the visit
  • Details of any past repairs
  • What it’s made of, if you know
  • Good light, ideally daylight, without flash glare

For a price in Lower Marston, the easiest route is photos: a close-up, a wider shot and your postcode. You will get a fixed quote with dates to choose from.

Keeping it looking good

Once the work has cured, treat it gently:

  • Use the extractor fan
  • Air the room after use
  • Dry the seal after bathing
  • Replace the seal when mould sets in

Do not scrape the sealant with anything sharp, and keep shampoo bottles off the joints.

Reseal before water gets in. Gaps or lifting edges mean it needs doing.

When a repair is not the answer

A repair is not always the answer, and we’ll tell you before we start. Repairs will not solve:

  • Very wide gaps that need a trim
  • Hidden water damage
  • A bath or tray that moves, until its support is fixed

Send us photos and we will tell you honestly before you book.

Materials we repair

  • Baths
  • Wet rooms
  • Basins & vanity units
  • Kitchen worktops & sinks
  • Shower trays & enclosures

The process

Your technician turns up at the time we agreed with you and looks over the damage before anything else. The floor and nearby surfaces are covered before any work starts. The work itself takes about two hours for a bath, and the room is left clean and tidy.

  1. First we strip out every bit of the old mastic.
  2. Next we clean the joint and deal with mould.
  3. We dry the joint thoroughly.
  4. Baths are filled with water first, so the joint is at its widest.
  5. We run a new bead of mould-resistant silicone and smooth it neatly, taps included.

Getting ready for the visit

  • Keep children and pets away from the room on the day
  • Tell us about any previous repairs or coatings
  • Avoid using the area for a few hours before we arrive

How to get a price

No survey visit is needed: we price from photos. Use the quote form, or ring 0345 017 0787 to talk it through, and we’ll come back with a fixed figure.

Get a fixed quote

Related advice

About Lower Marston

Lower Marston is about 2 miles south of Frome, in Somerset. Anywhere in BA11, we carry out the work at your property. Lower Marston is one of 640 places in Somerset where we work.

Every address in BA11 is within our area. Neighbouring places we cover include Trudoxhill (1 mile west), Witham Friary (3 miles south-west), Gare Hill (3 miles south), Yarnfield (4 miles south) and Kilmington (5 miles south). Within a short drive, we also cover Wells (14 miles west), Midsomer Norton (9 miles north-west), Shepton Mallet (9 miles west), Radstock (8 miles north-west), Wincanton (10 miles south) and Castle Cary (11 miles south-west).

Near you in Lower Marston

Typical jobs here are in homes near The Fox pub and Church of St Leonard, among other places. The nearest railway station is Frome station, roughly 2.3 miles north-east of the centre. Well-known places in the area include Nunney Castle (2.2 miles north-west). The countryside around Lower Marston includes Cley Hill and Vallis Vale.

Map of Lower Marston © OpenStreetMap contributors

What your bath or shower is made of matters

Shower trays

We put weight on a tray before sealing it, so the joint is at its widest.

Sinks and worktops

We reseal basins, vanity tops and kitchen worktops, once the joint is completely dry.

Landlord and trade work in Lower Marston

We regularly work with letting and managing agents. Just send photos, the address and how to get access and we’ll arrange it.

Hospitality businesses can’t afford rooms out of action for long, so most of our work is done in a single visit. We will fit around changeovers where we can.

Common questions in Lower Marston

Can landlords book you?

Yes. We carry out repairs for householders, landlords, letting agents, builders and businesses.

Why does mould come back so fast?

Mould needs moisture. Ventilation and drying keep it clean longer.

Why does the silicone keep cracking?

Something is moving. Persistent splitting can mean the support needs attention.

Will it make a mess?

Very little mess: we sheet and mask everything nearby, and we leave the room clean.

Is the work guaranteed?

All our work carries a one-year guarantee. We will explain what it covers when we quote.

What do you need from me?

A close-up, a wider photo and your postcode. Then we’ll agree a date.

Is there any odour?

A little, depending on the job. Ventilation keeps it to a minimum, and it soon fades.

I’m a tenant. Can you help?

We can work for tenants, landlords or agents. Get your landlord’s agreement first.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.