Wiltshire · England
Bath & shower resealing (mastic) in Kilmington, Wiltshire
Our repair technicians come to Kilmington for bath, shower and sink resealing with new mould-resistant silicone. Nothing is taken out, and the work is guaranteed.
- Gaps by the taps
- A messy previous reseal
- Discoloured, yellow sealant
Why it’s worth resealing in Kilmington
Putting new silicone over old doesn’t last. It peels within weeks, and mould stays trapped behind it. We remove the old sealant completely. The price reflects the work involved, not where you live. You will see the full price before you book.
Why us?
- Everything repaired in place
- No extra charge for your area
- Usually one visit, start to finish
- One-year guarantee on every repair
Take a look at our full price list.
About our bath resealing in Kilmington
The key to a good reseal is getting all of the old silicone out. Fresh sealant doesn’t stick to old, which is why so many DIY reseals peel. Whether it’s missing sealant behind the taps and sealant that’s split or lifting, we can help.
We guarantee the work for a year. If something is not right in that time, we come back and put it right.
- Where
- Kilmington (BA12)
- Area hub
- Wiltshire
- Warranty
- One year on every repair
- Quotes
- Free and fixed, from your pictures
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
Also near Kilmington
What else we do in Kilmington
Repairs by material
Sinks and worktops
Basins, vanity units and kitchen worktops are resealed too, once the joint is completely dry.
Shower trays
We put weight on a tray before sealing it, for the same reason.
About Kilmington
Kilmington is about 8 miles south of Frome, in Wiltshire. Whether you are in the middle of Kilmington or on the outskirts, the service is the same: fixed prices, tidy work and a one-year guarantee. Kilmington is one of 425 places in Wiltshire we cover.
All of BA12 is covered. Whether you live on Church Road, The Street and Cote Lane or a nearby road, we can come to you. Other places close to Kilmington include Stourton (1 mile south), Yarnfield (1 mile north), Gare Hill (3 miles north), South Brewham (3 miles west) and North Brewham (3 miles west). Further out, we also cover Trowbridge (15 miles north), Westbury (11 miles north-east), Warminster (8 miles north-east), Paxcroft Mead (15 miles north-east), Mere (3 miles south-east) and Tisbury (11 miles east).
Around Kilmington
Our customers here include homes close to Church of St Mary and the streets around them. Well-known places in the area include Mere Castle (3.1 miles south-east) and Mere Museum (3.2 miles south-east). For a walk, there’s Aaron's Hill.
- Local facilities include Four Towers (2.9 miles south-west)
Common problems we fix in Kilmington
No sealant lasts for ever. Every bath or shower adds moisture and soap residue, which mould loves, and the joint moves slightly every time the bath is filled.
The things customers normally mention when they call include:
- Damp near the bath
- Old sealant that looks dirty
- Gaps in the seal
- Mould you can’t clean out
What to look for in a quote
- What preparation is included
- Who turns up on the day
- What protection goes down before work starts
- How to care for the finish
What bath resealing costs
We charge the same across the UK, including Kilmington. What changes the price is:
- What the surface is made of
- The size and number of damaged areas
- Previous DIY repairs that have to come out
- How easy the damage is to reach
A repair typically costs much less than people expect, particularly next to the cost of replacement. Send photos and we will give you the exact figure.
Quotes from your photos
Good pictures mean an accurate price. Here’s what we find most useful:
- A coin or ruler next to the damage for scale
- A close-up of the damage, in focus
- What it’s made of, if you know
- Your postcode, so we can check dates
To get a price, send two or three photos using our quote form or ring us. We’ll say right away whether it can be repaired.
Landlord and trade work in Kilmington
If you manage property in Kilmington, we can repair and quote for several addresses together. Send pictures for each one and we will come back with a combined price.
We also carry out snagging repairs for builders and developers, putting right damage done during fitting so nothing needs replacing. We hold CHAS, Constructionline and SafeContractor accreditations.
What a repair cannot fix
It helps to know what we can’t do:
- Loose tiles, which need refixing first
- A bath or tray that moves, until its support is fixed
- Water damage behind the bath that needs a builder
If in doubt, send pictures and we will say what we think.
Materials we repair
- Shower trays & enclosures
- Wet rooms
- Baths
- Kitchen worktops & sinks
- Basins & vanity units
How to look after the repair
It’s all simple stuff, just a few sensible habits:
- Replace the seal when mould sets in
- Wipe the joints dry after use
- Give the seal a regular clean
- Don’t stand toiletries on the seal
Don’t scrape the sealant with anything sharp, and don’t stand bottles on the seal.
Damp below or loose tiles need checking quickly. There may be more going on, and we will say if you need a builder or plumber.
How it works
We begin by going over the job with you, so there are no surprises. After that, protection goes down around the work area and the work begins. You can expect it to take about two hours for a bath, and we will keep you posted as we go.
- We protect the area and mask the joint lines.
- We remove the old sealant and every trace of residue.
- The joint is cleaned, treated and dried.
- Fresh silicone is applied in a continuous bead.
- We smooth the bead, remove the tape and leave it to cure.
Preparing for the visit
- Clear the area around the damage
- Tell us about any previous repairs or coatings
- Keep a parking space free if you can
How to get a price
Upload photos of the damage and one of the entire item, and tell us you’re in Kilmington, and we’ll come back with a fixed quote.
Read more
FAQs for Kilmington
How long will it take?
Most reseals take about two hours. Leave it to cure before use.
Is there any odour?
It depends on the job, but often a little. Ventilation keeps it to a minimum, and it soon fades.
Is it worth repairing rather than replacing?
In most cases, yes. Replacement brings removal, refitting and making good, which a repair avoids. We will be honest if it’s not worth it.
When can I use the bath after resealing?
We’ll give you the curing time.
Do you hold any accreditations?
Yes, including CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
What do you need from me?
Use the quote form or ring 0345 017 0787, and we will take it from there.
Do you seal over the old sealant?
All the old sealant comes out. Fresh silicone does not stick to old.
What happens once I’ve sent pictures?
You will get a fixed quote back, plus dates. There is no obligation to book.
About our accreditations · Every repair comes with a one-year guarantee.
