Stockton-on-Tees · England

Bath & shower resealing (mastic) in Ingleby Barwick, Stockton-on-Tees

Bath resealing in Ingleby Barwick without the cost of replacing. Send us photos for a fixed quote, then we come to you.

  • Damp near the bath
  • Silicone coming away from the tiles
  • A messy previous reseal
Surface Doctor technician refinishing the outside of a roll-top bath

Trusted bath resealing in Ingleby Barwick

What your bath or shower is made of matters

Shower trays

Trays are sealed with weight on them, so the joint is at its widest.

Baths

We fill the bath before sealing, to open the joint fully.

Bath resealing in Ingleby Barwick without replacing anything

The key to a good reseal is getting all of the old silicone out. Fresh sealant doesn’t stick to old, which is why so many DIY reseals peel. If you are dealing with water getting behind the bath or tray and an untidy old seal, we can typically put it right.

The work is covered for a year after we finish. If anything is not right, ring us and we’ll come back.

Technician in a mask working on a freestanding roll-top bath
Area
Ingleby Barwick (TS17)
County
Stockton-on-Tees
Cover
One year on every repair
Quotes
Free and fixed, from your pictures
Phone
0345 017 0787
Page updated
23 October 2026

What bath resealing costs

There’s no charge for travel to Ingleby Barwick. The price comes down to:

  • Whether old repairs or coatings need taking off
  • What the surface is made of
  • How hard the colour is to match
  • The type of damage

What it costs depends on how much damage there is and what kind, what it’s made of and how many jobs we combine into one visit. We give a fixed quote from your pictures, so you know the cost before booking.

How to get a fixed price

Two or three clear photos are usually enough. It helps if you send:

  • A close-up of the damage, in focus
  • The material, if you know it
  • A wider photo showing the whole bath or shower
  • Any earlier repairs or coatings

For most jobs, photos are all we need to give you a price. Tell us what happened and where you are, and we’ll reply with a fixed quote and the earliest dates we have.

What we can’t put right

We will not take on work that will not last, so here’s what a repair can’t put right:

  • Hollow or loose tiles
  • Gaps so wide they need filling or trims before sealing
  • Water damage behind the bath that needs a builder

Send us photos and we will tell you honestly.

What we work on

  • Basins & vanity units
  • Kitchen worktops & sinks
  • Baths
  • Shower trays & enclosures
  • Wet rooms

When to call us in Ingleby Barwick

Black mould is the most common reason people reseal. It grows into the sealant itself, so cleaning can’t get it all out.

Signs it’s time to call us include:

  • Silicone smeared on tiles
  • Damp near the bath
  • Mould you cannot clean out
  • Sealant that’s split or lifting

Before you book anyone

  • Whether cleaning and preparation are in the price
  • How long the guarantee is and what it covers
  • How the colour is matched
  • Aftercare advice

Choosing a repair company

About Ingleby Barwick

Ingleby Barwick is about 4 miles south of Stockton-on-Tees, in Stockton-on-Tees. Whether you are in the middle of Ingleby Barwick or on the outskirts, we offer exactly the same service: fixed prices, tidy work and a one-year guarantee. Ingleby Barwick is one of 31 places in Stockton-on-Tees where we work. Our jobs stretch from Ingleby Barwick to Newcastle upon Tyne (35 miles away).

Jobs in TS17 work the same way as everywhere else we cover. Local streets include Upton Court, Branklyn Gardens and Greys Court, all of which we cover. Other places close to Ingleby Barwick include High Leven (1 mile south), Low Leven (1 mile south), Levendale (1 mile south-west), Eaglescliffe (1 mile west) and Preston-on-Tees (2 miles north-west). Within a short drive, we also cover Stockton-on-Tees (4 miles north), Billingham (7 miles north), Elm Tree Farm (4 miles north), Fairfield (4 miles north-west), Wynyard (9 miles north) and Hardwick (5 miles north). Ingleby Barwick is one of the larger places we cover in Stockton-on-Tees.

Around Ingleby Barwick

Typical jobs here are in homes near Preston Park, All Saints Academy and Barley Fields Primary, among other places. The nearest railway station is Eaglescliffe station, about 1.6 miles north-west. Nearby you’ll also find Carter Bequest Primary Care Hospital (3.6 miles north-east) and Green Dragon Museum (3.2 miles north).

Map of Ingleby Barwick © OpenStreetMap contributors

Questions from Ingleby Barwick

Can I add another job to the visit?

Yes. Combining jobs on one visit brings the cost down. Send pictures of everything you’d like done.

How long does resealing take?

Around two hours for a bath, plus curing time.

How quickly can you book me in?

Your quote comes with available dates. Tell us if you need it done quickly.

Do you come to Ingleby Barwick?

Yes. We cover the entire UK and come to Ingleby Barwick. Send photos and we’ll quote, or call 0345 017 0787.

Can I get a quote without a visit?

Nearly always. We only ask to see it in person if the pictures cannot show what we need.

Do you charge for travel?

Travel is included in the price, with the same prices everywhere we work.

Can tenants book a repair?

We’re happy to deal with the tenant, landlord or agent. Just ensure the landlord agrees.

Is my repair covered?

Yes: twelve months. If there’s a problem with the work in that time, we come back and put it right.

Is resealing worth it?

Resealing is a small job. Leaving split or mouldy sealant can let water reach the walls and floor, which costs far more to put right. Rather than charging by the hour, we fix the price before we start. Damage, material and access decide it.

Why us?

  • One price list for the entire UK
  • Nothing taken out or refitted
  • One visit for most repairs
  • We come to you, anywhere in the UK

Take a look at our full price list.

What we do, step by step

Once we’re through the door, we keep the work contained to the one room. We mask off everything nearby, the work takes around two hours, and we finish with a tidy-up and a look at the finished work together.

  1. We cut out and remove all of the old sealant.
  2. The joint is cleaned and any mould treated.
  3. The joint is dried thoroughly.
  4. Baths are filled with water first, so the joint is at its widest.
  5. New mould-resistant silicone goes on and is tooled to a neat finish, taps included.

Before we arrive

  • Move bottles, mats and clutter away from the area
  • Open a window if you can
  • Tell us about any previous repairs or coatings

Get a quote

There is no need for us to visit first. Nearly every job can be priced from photos: send a close-up, a wider shot and your postcode, and we will come back to you with a fixed figure.

Send pictures for a quote

Related advice

Landlord and trade work in Ingleby Barwick

We also carry out snagging repairs for builders and developers, putting right damage done during fitting. We hold CHAS, Constructionline and SafeContractor accreditations.

Hotels, guest houses and holiday lets need rooms back in use quickly, so most of our work is done in a single visit. We’ll fit around changeovers where we can.

How to look after the repair

Aftercare is simple:

  • Reseal at the first sign of lifting
  • Use the extractor fan
  • Dry the seal after bathing
  • Don’t stand toiletries on the seal

Keep the room well ventilated, and dry the joints after bathing to keep mould away.

Mouldy sealant is more than a cosmetic problem. Resealing early keeps water out of the walls and floor.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.