Worcestershire · England

Bath Resealing in Malvern Wells

We travel to Malvern Wells for bath, shower and sink resealing with new mould-resistant silicone. Nothing is taken out, with a one-year guarantee.

  • An untidy old seal
  • Leaks at the edges
  • Stained silicone
Surface Doctor technician refinishing the outside of a roll-top bath

Bath resealing for Malvern Wells homes

How we handle bath resealing in Malvern Wells

Resealing is one of the simplest ways to protect your bathroom. Old, split or mouldy sealant lets water get behind the bath or tray, and a new seal stops it. Common call-outs are for black mould in the sealant and an untidy old seal, across wet rooms, shower trays & enclosures and baths.

All our work comes with a one-year guarantee.

Roll-top bath being refinished by a Surface Doctor technician
Location
Malvern Wells (WR14)
Region
Worcestershire
Warranty
One year on every repair
Price
Free and fixed, from your photos
Phone
0345 017 0787
Page updated
23 October 2026

Resealing in Malvern Wells: why it matters

Resealing costs very little. Leaving failed sealant can let water cause damage that costs far more to fix. Rather than charging by the hour, we price the whole job up front. It depends on the damage, the material and access.

Why choose Surface Doctor in Malvern Wells

  • Generally one visit, start to finish
  • Honest advice, even when it means no job
  • One-year guarantee on every repair
  • No need to remove anything

Take a look at our pricing.

Do you need bath resealing in Malvern Wells?

Most reseals are because of black mould. It grows into the silicone, so cleaning cannot get it all out.

Common reasons people in Malvern Wells contact us are:

  • Stained silicone
  • Gaps in the seal
  • A messy previous reseal
  • Damp near the bath

Questions to ask before booking

  • How soon you can use it again
  • How long the guarantee is and what it covers
  • Whether a trained technician does the job
  • What prep work is covered

10 questions to ask before booking

When we’d advise against a repair

We will not take on work that will not last, so here’s what a repair can’t put right:

  • A bath or tray that moves, until its support is fixed
  • Hidden water damage
  • Tiles that move, until they’re refixed

Send us photos and we will tell you honestly before booking.

Surfaces we repair

  • Wet rooms
  • Shower trays & enclosures
  • Kitchen worktops & sinks
  • Baths
  • Basins & vanity units

Repairs by material

Baths

Baths are resealed with water in them, so the joint is at its widest.

Sinks and worktops

We reseal basins, vanity tops and kitchen worktops, once the joint is completely dry.

Can I fix it myself?

For a hairline mark somewhere you’ll never see, a kit may be enough. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.

Kits are cheap and easy to find, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Getting it right first time is usually cheaper.

How the visit works

We agree an arrival time beforehand. Once we are there, the work takes a couple of hours for most jobs. The room is left tidy.

  1. We cut out all of the old sealant.
  2. Residue is removed and the joint cleaned.
  3. We treat mould and dry the joint thoroughly.
  4. We fill the bath, or weight the tray, to open the joint.
  5. New mould-resistant silicone is applied and tooled neatly.

Preparing for the visit

  • Avoid using the area for a few hours before we arrive
  • Let us know which floor the room is on
  • Let us know about parking or access

Getting a price

To get a price, send two or three photos using our quote form or call us. We will say right away whether it can be repaired.

Get a fixed quote

Related advice

Your questions about bath resealing in Malvern Wells

Can I get a quote without a visit?

In nearly every case. If pictures don’t show enough, we’ll ask for another angle.

Do you charge for travel?

Travel is included in the price, with the same prices everywhere we work.

Is it safe with children and pets around?

On the day, the room should be kept clear of pets and children, mainly so nothing gets touched before it has cured.

How do I stop mould in sealant?

Typically poor ventilation and moisture sitting on the joint. Mould-resistant silicone and good ventilation help.

How long does a reseal take?

Around two hours for a bath, then it needs to cure.

Will there be a smell?

Some materials have a smell while they’re applied, so we ventilate the room. It clears as the materials cure.

Is my repair covered?

Yes: twelve months. If there is a problem with the work in that time, we come back and put it right.

Can you repair something that is been repaired before?

Yes, we frequently do. It can add a little time, which we include in the quote.

Work for landlords and builders

Rented homes see more wear and tear, and replacing items every time a tenant leaves is expensive. Repairing between tenants keeps the property presentable for less.

We regularly work with letting and managing agents. Just send photos, the address and how to get access and we’ll handle the rest.

Prices and what affects them

Prices are worked out job by job, from your pictures. The main factors are:

  • Any earlier repairs that need removing first
  • How hard the colour is to match
  • What the surface is made of
  • How much damage there is

No two jobs are quite the same, so we price each one individually. The size and type of damage, the material and access all play a part, and combining jobs on one visit brings the cost down.

How to get a fixed price

Most quotes are done from photos alone. To make it quick:

  • Any earlier repairs or coatings
  • A picture taken from further back
  • Good light, ideally daylight, without flash glare
  • Where you are, by postcode

Getting a quote takes a couple of minutes: take one close-up and one wider shot of the bath or shower, add your postcode and send them over. You will get a fixed quote, not an estimate.

Our work in Malvern Wells

Malvern Wells is about 3 miles south of Great Malvern, in Worcestershire. Our work suits any type of property, old or new, large or small, plus businesses and rented homes. Malvern Wells is one of 376 towns and villages in Worcestershire we cover. You can also see our page for Birmingham, about 33 miles away.

Here we cover the WR14 postcode area. You will find streets such as Wells Road, Oaklands and Holywell Road, and we cover them all. If you’re just outside Malvern Wells, we cover Upper Welland (1 mile south-east), Upper Colwall (1 mile north), Evendine (1 mile south-west), Wyche (1 mile north) and Colwall Stone (1 mile west). Within a short drive, we also cover Worcester (10 miles north-east), Great Malvern (3 miles north), Droitwich Spa (15 miles north-east), Pershore (11 miles east), Warndon (11 miles north-east) and Rainbow Hill (10 miles north-east).

Near you in Malvern Wells

We visit homes around The Chase, St Wulstan's Roman Catholic Church and Malvern Wells CofE Primary School. Other local landmarks include The Hawthorn Inn (0.8 miles south-east) and The Downs (1.2 miles north-west). The nearest railway station is Colwall station, about 1.1 miles west. A little further out are Malvern Museum of Local History (2.3 miles north) and British Camp (1.6 miles south-west). The countryside around Malvern Wells includes Brotheridge Green Nature Reserve and Pinnacle Hill.

Map of Malvern Wells © OpenStreetMap contributors
CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.