Lincolnshire · England
Bath & shower resealing (mastic) in Marton, Lincolnshire
Bath resealing across Marton and nearby, done in a single visit in most cases.
- Leaks at the edges
- Silicone coming away from the tiles
- Discoloured, yellow sealant
Looking after it afterwards
Nothing complicated is needed:
- Keep bottles off the joints
- Reseal when black spots will not clean off
- Keep the joints dry
- Clean the sealant gently and regularly
Good ventilation is the best protection, and dry the joints after bathing so mould struggles to take hold.
Damp below or loose tiles need checking quickly. It may be more than a reseal, so we will tell you if it needs a builder or plumber.
Bath resealing at your home in Marton
All of the old sealant is cut out, treat any mould, and apply fresh mould-resistant silicone. We do this for baths, showers, sinks and worktops, including the awkward bits behind the taps. Whether it’s old sealant that looks dirty and black mould in the sealant, we can help, whatever the material.
The work is covered for a year after we finish. If anything isn’t right, ring us and we’ll come back.
- Where
- Marton (DN21)
- Area hub
- Lincolnshire
- Guarantee
- A year, on every repair
- Quote
- Free and fixed, from your pictures
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
Places near Marton
More services for Marton
What bath resealing costs
We do not charge extra for travel to Marton. The price depends on:
- How hard the colour is to match
- Where the damage is and how we get to it
- Any earlier repairs that need removing first
- What kind of damage it is
The price reflects the work involved, not your postcode. You will see the full price before booking.
Send photos for a quote
Two or three clear pictures are normally enough. It helps if you send:
- Whether it’s been repaired or coated before
- A coin or ruler next to the damage for scale
- A wider photo showing the whole bath or shower
- Daylight if possible, and no flash reflection
There’s no need for us to visit first. Nearly every job can be priced from pictures: send a close-up, a wider shot and your postcode, and we’ll come back to you with a fixed figure.
Do you need bath resealing in Marton?
Even good sealant eventually discolours particularly in a well-used bathroom. Steam, soap and movement all wear it down.
The things customers normally mention when they call are:
- An untidy old seal
- Sealant that is split or lifting
- Discoloured, yellow sealant
- Leaks at the edges
Before you book anyone
- Whether a trained technician does the job
- The length of the guarantee and what it covers
- How the room is protected while they work
- When it can be used again
Marton and nearby
Marton is about 5 miles south of Gainsborough, in Lincolnshire. Our work suits any type of property, from flats and terraces to detached houses and new builds, plus businesses and rented homes. Our technicians cover all 732 towns and villages in Lincolnshire, from the larger towns to small villages. You can also see our page for Leeds, about 47 miles away.
Our repair technicians cover all of DN21 and the streets around it. Jobs here include addresses on High Street, Littleborough Lane and Trent Approach and the roads around them. Being close to the A156, Marton is easy for our technicians to reach. We also travel to Gate Burton (1 mile north), Brampton (2 miles south), Cottam (2 miles south-west), Knaith (2 miles north) and Torksey (2 miles south). Within a short drive, we also cover Lincoln (11 miles south-east), Gainsborough (5 miles north), North Hykeham (12 miles south-east), Birchwood (10 miles south-east), Hykeham (12 miles south-east) and Ermine (10 miles south-east).
Near you in Marton
Locally, our jobs take us to homes close to The Marton Academy, Church of St Margaret of Antioch and Ingelby Arms Public House, among other places. The closest station to Marton is Gainsborough Lea Road station, about 4.2 miles north of the centre. A little further out are Rampton Secure Hospital (4.8 miles south-west).
FAQs for Marton
Can I add another job to the visit?
Of course, and it typically saves money. Just add the extra items to your pictures and we will quote them together.
How long does a reseal take?
Around two hours for a bath, then it needs to cure.
What happens once I’ve sent photos?
We look at the pictures and reply with a fixed price and some dates. If we need another angle, we’ll ask.
Do you work in Marton?
We do. Technicians travel to Marton from across the region, and the price is the same as everywhere else.
When can I use the bath after resealing?
Normally after around 24 hours. We’ll tell you the exact time.
Why does mould come back so fast?
Typically poor ventilation and moisture sitting on the joint. We use mould-resistant silicone, and ventilation helps it last.
How soon can you come?
We will give you dates with your quote. Tell us if you need it done quickly.
Will you leave a mess?
Dust sheets and masking go down before we start, and tidy up before we leave.
Resealing in Marton: why it matters
Resealing is a small job. Leaving split or mouldy sealant lets water get behind the bath or tray, which costs far more to put right. Compared with replacing, repairing typically costs far less, because there is no removal, plumbing or making good. The quote lists exactly what you’re paying for.
Why book with us
- Accredited with CHAS, Constructionline and SafeContractor
- One-year guarantee on every repair
- Honest advice, even when it means no job
- Usually one visit, start to finish
See our full price list.
Landlord and trade work in Marton
We work for landlords, letting agents and housing providers in Marton as well as homeowners. A repair between tenants keeps the property empty for less time, and it costs much less than replacing.
Rental properties take more wear, and replacing things at every changeover adds up. Repairing between tenants keeps the property presentable for less.
Should I try a DIY kit first?
For a hairline mark somewhere you’ll never see, a kit may be enough. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.
What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.
How it works
Visits start with a quick look at the job together, so you know exactly what we are doing. Then the area is sheeted and masked and we start. Allow around two hours.
- The old silicone is cut out completely.
- We remove the residue and clean the joint.
- Any mould is treated and the joint dried.
- The bath is filled with water, or weight put on the tray.
- We apply fresh mould-resistant silicone and tool a neat bead.
Getting ready for the visit
- Have somewhere for us to park nearby if possible
- Mention if the room is upstairs or in a flat
- Tell us about any previous repairs or coatings
Getting a price
For most jobs, photos are all we need to give you a price. Tell us what happened and where you are, and we will reply with a fixed quote and the earliest dates we have.
Related advice
Repairs by material
Baths
We fill the bath before sealing, so the joint is at its widest.
Shower trays
We put weight on a tray before sealing it, for the same reason.
About our accreditations · Every repair comes with a one-year guarantee.
