Suffolk · England

Bath Resealing for Mettingham homes

Fixed-price bath resealing in Mettingham and the surrounding area, done in a single visit in most cases.

  • An untidy old seal
  • Discoloured, yellow sealant
  • Black mould in the sealant
Surface Doctor technician refinishing the outside of a roll-top bath

Bath resealing near Mettingham

How to look after the repair

Once the work has cured, treat it gently:

  • Replace the seal when mould sets in
  • Keep bottles off the joints
  • Clean the sealant gently and regularly
  • Open a window after bathing

Do not scrape the sealant with anything sharp, and do not stand bottles on the seal.

Reseal before water gets in. Gaps or lifting edges mean it needs doing.

Bath resealing at your home in Mettingham

Baths are resealed with water in them, so the joint is at its widest, so the seal doesn’t tear when the bath is first used. Common call-outs are for mould you can’t clean out and gaps in the seal, on kitchen worktops & sinks, basins & vanity units and baths.

You are covered after we leave: each job carries a one-year guarantee, and we explain what it covers before booking.

Technician in a mask working on a freestanding roll-top bath
Location
Mettingham (NR35)
County
Suffolk
Guarantee
A year, on every repair
Quote
Fixed and free, based on photos
Call
0345 017 0787
Page updated
23 October 2026

Can I fix it myself?

If you do try a kit, read the instructions carefully, and give it the full curing time. If it does not work out, we can still repair it properly.

You can buy a DIY kit for most repairs, and they can make a small mark look better. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.

Our work in Mettingham

Mettingham is about 11 miles west of Lowestoft, in Suffolk. From the centre of Mettingham to the outlying streets, the service is the same: fixed prices, tidy work and a one-year guarantee. Mettingham is one of 731 towns and villages in Suffolk where we work.

All of NR35 is covered, from the main roads to the quietest streets. From Vicarage Lane and Rectory Lane or a nearby road, a technician can come to you. We also cover the places around Mettingham: Wainford (1 mile north-west), Bungay (1 mile west), Broome (1 mile north-west), Ditchingham (1 mile north-west) and Broome Street (2 miles north). Larger places within reach include Lowestoft (11 miles east), Beccles (4 miles east), Halesworth (8 miles south), Carlton Colville (9 miles east), Kirkley (11 miles east) and Pakefield (11 miles east).

Around Mettingham

Our clients here include homes close to Bungay Primary School, Bungay High School and Church of All Saints and the streets around them. The closest station to Mettingham is Beccles station, roughly 4.2 miles east of the centre. Well-known places in the area include Mettingham Castle (0.6 miles south) and Beccles and District War Memorial Hospital (3.9 miles east).

  • Parks and local facilities nearby include Wainford Rural District (1.7 miles south)
Map of Mettingham © OpenStreetMap contributors

What bath resealing costs

Prices are worked out job by job, from your photos. The main factors are:

  • The material and finish
  • How easy the damage is to reach
  • How many items we do on one visit
  • Whether it’s a chip, crack, burn or wear

We don’t add extras on the day. What we quote from your pictures is what you pay, unless the damage turns out to be different, in which case we talk to you first.

Getting a price from pictures

Two or three clear photos are typically enough. It helps if you send:

  • Good light, ideally daylight, without flash glare
  • A clear, close picture of the problem area
  • A coin beside the damage so we can judge size
  • One picture of the whole bath or shower

For most jobs, photos are all we need to give you a price. Add a line about what happened and your postcode, and we’ll reply with a fixed quote and the earliest dates we have.

Different materials, different repairs

Baths

Baths are resealed with water in them, so the joint is at its widest.

Shower trays

We put weight on a tray before sealing it, so the joint is at its widest.

For landlords and businesses

Hospitality businesses need rooms back in use quickly, so most of our work is done in a single visit. We can work around your bookings.

We regularly work with letting and managing agents. Just send pictures, the address and how to get access.

What we’re called out for in Mettingham

Sealant splits when the bath or tray moves, often because it was sealed while the bath was empty.

It’s worth getting a quote if you see:

  • Discoloured, yellow sealant
  • Gaps by the taps
  • Sealant that’s split or lifting
  • A messy previous reseal

Before booking anyone

  • Whether the colour is mixed to match
  • How your room will be protected
  • Who will actually do the work
  • Is the price fixed, and does it include VAT?

Our hiring checklist

Questions from Mettingham

How long does resealing take?

Most reseals take about two hours. Leave it to cure before use.

Will you leave a mess?

Dust sheets and masking go down before we start, and we clean up when we’ve finished.

How much does bath resealing cost in Mettingham?

The exact price depends on the damage, so we quote from photos. You’ll get a fixed figure before you book.

Is it safe with children and pets around?

Please keep children and pets out of the room during the visit. The rest of the house is unaffected.

How long before I can shower?

We will give you the curing time.

Can new silicone go over old?

All the old sealant comes out. Fresh silicone does not stick to old.

Is a repair better than a new one?

Generally, yes. Replacement brings removal, refitting and making good, which a repair avoids. We’ll be honest if it’s not worth it.

Can you redo someone else’s repair?

In most cases. The old repair comes out first, so let us know about it.

What happens on the day

It’s a tidy, low-fuss visit. We agree the arrival time in advance, cover and mask the work area, then carry out the work, which usually takes a couple of hours. If we find something your pictures didn’t show, we’ll explain it before carrying on.

  1. All the old sealant is cut out and removed.
  2. The joint is cleaned and any mould treated.
  3. We make sure the joint is completely dry.
  4. For a bath, we fill it with water first so the joint is at its widest.
  5. We run a new bead of mould-resistant silicone and smooth it neatly, taps included.

Preparing for the visit

  • Tell us if there are stairs or a lift
  • Have a window or extractor fan available
  • Tell us about parking, stairs or access

Ask for a price

A quote takes minutes to ask for: photograph the damage, then the whole bath or shower, include your postcode and send them to us. You will get a fixed price, not an estimate.

Get a free quote

Advice

When a repair isn’t the answer

To be straight with you, some problems need a different fix:

  • Gaps so wide they need filling or trims before sealing
  • Movement in the bath or tray
  • Hidden water damage

If in doubt, send pictures and we will say what we think before booking.

Surfaces we repair

  • Wet rooms
  • Baths
  • Shower trays & enclosures
  • Kitchen worktops & sinks
  • Basins & vanity units
CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.