East Sussex · England

Bath & shower resealing (mastic) in Mill Corner, East Sussex

Bath resealing in and around Mill Corner: photo quotes, tidy work and a year’s guarantee.

  • Gaps by the taps
  • Black spots in the silicone
  • Water getting behind the bath or tray
Surface Doctor technician refinishing the outside of a roll-top bath

Book bath resealing in Mill Corner

Repairs by material

Sinks and worktops

Basins, vanity units and kitchen worktops are resealed too, once the joint is completely dry.

Shower trays

We put weight on a tray before sealing it, for the same reason.

Bath resealing in Mill Corner, done in place

A proper reseal starts with removing every trace of the old silicone. Fresh sealant does not stick to old, which is why many DIY jobs peel. Whether it’s an untidy old seal and mould you can’t clean out, we can normally put it right.

Peace of mind is built in: each job carries a one-year guarantee, and we will explain exactly what it covers when we quote.

Area
Mill Corner (TN31)
Region
East Sussex
Cover
A year, on every repair
Quotes
Free, fixed quote from pictures
Phone
0345 017 0787
Updated
23 October 2026
Technician in a mask working on a freestanding roll-top bath

Questions from Mill Corner

Do you hold any accreditations?

We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.

Do you seal over the old sealant?

All the old sealant comes out. New silicone won’t bond to old.

I rent my home. Can I book you?

We can work for tenants, landlords or agents. Just make sure the landlord agrees.

What areas do you cover?

All of East Sussex, and the rest of the UK. There is no extra charge for travel.

When can you do it?

Your quote comes with available dates. If it’s urgent, say so and we will do what we can.

How long will it take?

Most reseals take about two hours. It then needs time to cure.

Can you repair something that is been repaired before?

In most cases. We remove the old repair before doing a new one, so mention it when you send photos.

What information do you need?

Use the quote form or ring 0345 017 0787.

How to look after the repair

After the repair has cured, a few habits help it last:

  • Air the room after use
  • Dry the seal after bathing
  • Run the extractor fan during and after showers
  • Replace the seal when mould sets in

Good ventilation is the best protection, and wipe the joints after use to keep mould away.

Reseal before water gets in. Split or lifting sealant is a sign it’s time.

How it works

It’s a tidy, low-fuss visit. We confirm the time with you beforehand, cover and mask the work area, and get on with the job, which normally takes about two hours for a bath. If anything looks different from your photos, we will talk to you before going ahead.

  1. All the old sealant is cut out and removed.
  2. Next we clean the joint and deal with mould.
  3. The joint is dried thoroughly.
  4. We fill a bath with water before sealing so the gap is at its widest.
  5. We apply new mould-resistant silicone and tool it to a neat finish, including around the taps.

Preparing for the visit

  • Point us to the nearest place to park
  • Mention any earlier repairs or resurfacing
  • Keep pets and children out of the room while we work

Ask for a price

No survey visit is needed: we price from photos. Use the quote form, or ring 0345 017 0787 to talk it through, and we will come back with a fixed figure.

Send pictures for a quote

Related advice

When to call us in Mill Corner

In time, even good sealant discolours. Steam, soap and movement all take their toll.

People generally call us after spotting one of these:

  • Gaps in the seal
  • Gaps by the taps
  • Damp near the bath
  • Black spots in the silicone

Comparing quotes

  • Who turns up on the day
  • Aftercare advice
  • What happens if the damage is worse than the pictures show
  • What prep work is covered

Choosing a repair company

When a repair is not the answer

We will always be straight with you, so here’s what a repair can’t fix:

  • Water damage behind the bath that needs a builder
  • Tiles that move, until they’re refixed
  • A bath or tray that moves, until its support is fixed

If in doubt, send pictures and we’ll say what we think before booking.

Materials we work on in Mill Corner

  • Basins & vanity units
  • Kitchen worktops & sinks
  • Baths
  • Wet rooms
  • Shower trays & enclosures

Can I fix it myself?

It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and then the old filler has to be removed first.

If you’ve already tried a DIY fix, that’s fine. We remove the old filler and start again, so it won’t stop us repairing it. Just mention it when you send photos, as it can add time.

Prices and what affects them

We price every job individually, from your photos. What matters most is:

  • What kind of damage it is
  • The material
  • The size and number of damaged areas
  • The colour and finish to match

Most people are surprised how affordable a repair is, especially compared with replacing and refitting. Send pictures and we’ll give you the exact figure.

How to get a fixed quote

Photographing the damage takes a minute. Please include:

  • A close-up of the damage, in focus
  • The material, if you know it
  • A coin or ruler next to the damage for scale
  • Details of any past repairs

Send us a picture of the damage and a wider shot of the whole item, and tell us you’re in Mill Corner, and we’ll reply with a fixed quote.

Landlord and trade work in Mill Corner

Rented homes see more wear and tear, and replacing things at every changeover adds up. A repair between tenancies is a cheaper way to keep the property in good order.

If you manage property in Mill Corner, we can repair and quote for several addresses together. Send pictures for each one and we’ll price them together.

About Mill Corner

Mill Corner is about 8 miles north of Hastings, in East Sussex. From the centre of Mill Corner to the outlying streets, we offer exactly the same service: fixed prices, tidy work and a one-year guarantee. Mill Corner is one of 289 places in East Sussex where we work. Our nearest city page is London, about 47 miles away.

Our visits in TN31 are booked in the same way as anywhere else. Other places close to Mill Corner include Snagshall (2 miles west), Staplecross (2 miles west), Cackle Street (3 miles south), Cripp's Corner (3 miles south-west) and Brede (3 miles south). Further out, we also cover Hastings (8 miles south), Bexhill-on-Sea (11 miles south-west), St Leonards (9 miles south), Hastings Old Town (9 miles south), Belmont (8 miles south) and Heathfield (15 miles west).

Landmarks near Mill Corner

Locally, our jobs take us to homes close to Northiam Church of England Primary School and Hayes Arms Hotel. For rail, the closest station is Doleham station, roughly 4.3 miles south. Open spaces near Mill Corner include Flatropers Wood.

Map of Mill Corner © OpenStreetMap contributors
CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.