Coventry · England

Bath & shower resealing (mastic) in Millison's Wood, Coventry

Bath resealing in and around Millison's Wood: photo quotes, tidy work and a year’s guarantee.

  • Water getting behind the bath or tray
  • Sealant that’s split or lifting
  • Missing sealant behind the taps
Surface Doctor technician refinishing the outside of a roll-top bath

Bath resealing in Millison's Wood

Bath resealing at your home in Millison's Wood

We cut out all of the old sealant, treat any mould, and reseal with new mould-resistant silicone. We reseal baths, showers, sinks and worktops, and that includes the awkward spots behind the taps. We’re often asked to fix leaks at the edges and an untidy old seal, across wet rooms, shower trays & enclosures and kitchen worktops & sinks.

Peace of mind is built in: each job carries a one-year guarantee, and we explain what it covers before booking.

Roll-top bath being refinished by a Surface Doctor technician
Area
Millison's Wood (CV5)
Area hub
Coventry
Warranty
One year on every repair
Quotes
Free and fixed, from your pictures
Phone
0345 017 0787
Last updated
23 October 2026

Is resealing worth it?

Resealing is routine maintenance. Leaving split or mouldy sealant lets water get behind the bath or tray, which costs far more to put right. Set against the cost of replacement, repairing typically costs far less, because nothing has to be taken out, refitted or made good. The quote lists exactly what you’re paying for.

Why Millison's Wood customers choose us

  • No need to remove anything
  • CHAS and Constructionline accredited
  • We leave the room as we found it
  • Straight answers about what a repair can do

See our prices page.

What we cannot put right

Honesty matters more than a booking, so here’s what a repair can’t fix:

  • A bath or tray that moves, until its support is fixed
  • Rotten walls or floors behind the bath
  • Hollow or loose tiles

If in doubt, send pictures and we will say what we think.

Surfaces we repair

  • Wet rooms
  • Kitchen worktops & sinks
  • Basins & vanity units
  • Baths
  • Shower trays & enclosures

The process

We work cleanly and quietly. Protection goes down first, then the job itself takes around two hours. At the end we talk you through the curing time and the aftercare.

  1. We cut out all of the old sealant.
  2. Residue is removed and the joint cleaned.
  3. We treat mould and dry the joint thoroughly.
  4. We fill the bath, or weight the tray, to open the joint.
  5. We apply fresh mould-resistant silicone and tool a neat bead.

How to prepare

  • Mention any parking restrictions or tricky access
  • Keep a parking space free if you can
  • Let the surface dry out before the visit

Ask for a price

For most jobs, pictures are all we need to give you a price. Add a line about what happened and your postcode, and we’ll send back a fixed quote and some dates.

Send photos for a quote

Advice

Landlord and trade work in Millison's Wood

We work for landlords, letting agents and housing providers in Millison's Wood as well as homeowners. Repairing between tenancies keeps void periods short, and it usually costs far less than a refit.

Letting agents often send us photos straight from the inventory. You can have a price before you arrange access, and we liaise with tenants about access if you’d like us to.

When to call us in Millison's Wood

A bathroom without good ventilation is hard on sealant: damp hangs around, and mould takes hold.

Keep an eye out for any of the following:

  • Discoloured, yellow sealant
  • Silicone smeared on tiles
  • Water getting behind the bath or tray
  • Missing sealant behind the taps

Before you book anyone

  • Whether they match the colour on site
  • What preparation is included
  • How changes to the job are handled
  • What the guarantee covers, and for how long

10 questions to ask before you book

Millison's Wood and the surrounding area

Millison's Wood is about 5 miles west of Coventry, in Coventry. Across the CV5 area, we carry out the work at your property. Millison's Wood is one of 88 places in Coventry where we work. We work right across the region, from Millison's Wood to Birmingham (12 miles away).

Our repair technicians cover all of CV5 and the streets around it. We regularly work on streets such as James Dawson Drive, Thebes Close and Birmingham Road. Neighbouring places we cover include Eaves Green (1 mile north-west), Hollyberry End (1 mile north), Four Oaks (1 mile south-west), Meriden (2 miles west) and Benton Green (2 miles south). Larger places within reach include Coventry (5 miles east), Hillfields (5 miles east), Bishopsgate Green (5 miles east), Radford (4 miles east), Ernesford Grange (7 miles east) and Foleshill (6 miles east).

Local landmarks in Millison's Wood

We visit homes around St Andrew's Church of England Infant School, Tile Hill Wood School and The Poachers Retreat pub, among other places. The nearest railway station is Tile Hill station, roughly 2.6 miles south of the centre. A little further out are Allesley Castle (2.2 miles south-east) and Berkswell Village Museum (2.1 miles south-west).

Map of Millison's Wood © OpenStreetMap contributors

FAQs for Millison's Wood

Why does my sealant keep splitting?

Something is moving. Persistent splitting can mean the support needs attention.

Do I have to be there?

Someone needs to let us in and show us the job. After that, you can carry on with your day.

Do you hold any accreditations?

Yes, including CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.

Do you charge for travel?

We do not add a call-out fee. The fixed price covers the visit and the work.

Is repairing better than replacing?

Typically, when the rest is in good condition. A repair avoids removal and making good. We will tell you honestly if replacement makes more sense.

Why does mould come back so fast?

Mould needs moisture. Run the fan, dry the joints and the new seal stays cleaner for longer.

Do you come to Millison's Wood?

We do. We send a technician to Millison's Wood for every job, with no extra charge for travel.

Which areas do you work in?

Everywhere in the UK, Millison's Wood included. There is no extra charge for travel.

Aftercare tips

A little care keeps the finish looking good. Our advice:

  • Clean the joints with a mild cleaner
  • Let steam out after showers
  • Store bottles on a shelf
  • Run the extractor fan during and after showers

Leave the sealant to cure for the time we give you, normally about a day.

Do not wait until water gets behind the bath. Split or lifting sealant is a sign it’s time.

Prices and what affects them

A fixed quote means you know the cost before you book. We look at:

  • The size and number of damaged areas
  • Unusual colours or finishes
  • Doing more than one item at once
  • Whether it’s a chip, crack, burn or wear

Most people are surprised how affordable a repair is, especially compared with replacing and refitting. Send pictures and we’ll give you the exact figure.

Send pictures for a quote

Most quotes are done from photos alone. To help us price it:

  • Your postcode, so we can check dates
  • Any earlier repairs or coatings
  • Any details about the material
  • A coin or ruler next to the damage for scale

Email us pictures of the damage and a wider shot of the entire item, and tell us you’re in Millison's Wood, and we’ll reply with a fixed quote.

What your bath or shower is made of matters

Baths

We fill the bath before sealing, so the joint is at its widest.

Sinks and worktops

We reseal basins, vanity tops and kitchen worktops, once the joint is completely dry.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.