Staffordshire · England
Bath & shower resealing (mastic) in Milwich, Staffordshire
Bath resealing in Milwich without the cost of replacing. Get a fixed quote from your photos, then book a visit.
- Gaps in the seal
- Old sealant that looks dirty
- Water getting behind the bath or tray
Bath resealing in Milwich without replacing anything
We reseal baths, shower trays, basins and worktops. Most jobs take a couple of hours, then it needs to cure. Typical jobs include damp near the bath and old sealant that looks dirty, on wet rooms, baths and shower trays & enclosures.
You’re covered for a year from the day of the repair. Just call us if there’s a problem and we will sort it.
- Location
- Milwich (ST18)
- County
- Staffordshire
- Warranty
- 12 months on all our work
- Quote
- Free and fixed, from your photos
- Call
- 0345 017 0787
- Updated
- 23 October 2026
Milwich: your questions answered
Why does mould come back so fast?
Mould needs moisture. Run the fan, dry the joints and the new seal stays cleaner for longer.
Is a repair better than a new one?
In most cases, yes. A repair skips the removal, fitting and redecorating. We’ll be honest if it’s not worth it.
Do I need to be at home?
We need someone to let us in. After that, you can carry on with your day.
Is there a guarantee?
Yes, for a year. If there is a problem with the work in that time, we come back and put it right.
Are you accredited?
Yes, including CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
What information do you need?
Send photos through the quote form or call 0345 017 0787.
Can you do more than one item on the same visit?
Of course, and it typically saves money. Just add the extra items to your pictures and you will get one combined price.
When can you do it?
Your quote comes with available dates. If it’s urgent, say so and we will do what we can.
Where we work around Milwich
Milwich is about 4 miles east of Stone, in Staffordshire. We work in every kind of home, from flats and terraces to detached houses and new builds, plus businesses and rented homes. Milwich is one of 512 towns and villages in Staffordshire where we work. Our nearest city page is Birmingham, about 30 miles away.
Here we cover the ST18 postcode area. Streets in the area include The Allways and Uttoxeter Road, and we cover them all. If you are just outside Milwich, we cover Coton (1 mile east), Dayhills (1 mile west), Coton Hayes (1 mile east), Smallrice (1 mile west) and Fradswell (2 miles south-east). We also work in nearby towns such as Stafford (7 miles south-west), Newcastle-under-Lyme (12 miles north-west), Cannock (13 miles south), Longton (8 miles north-west), Rugeley (10 miles south-east) and Burntwood (15 miles south).
Landmarks near Milwich
In Milwich, that means homes near Church of All Saints, The Green Man pub and Green Lea First School, among other places. The nearest railway station is Stone station, about 4.9 miles west of the centre. A little further out are Chartley Castle (3.4 miles south-east) and Stafford Hospital (5.8 miles south-west).
How to care for the repair
Nothing complicated is needed:
- Keep bottles off the joints
- Run the extractor fan during and after showers
- Clean the joints with a mild cleaner
- Air the room after use
Use the extractor fan, dry the joints after bathing, and clean them regularly with a mild cleaner to slow mould growth.
If you notice damp, stains on the ceiling below or loose tiles, act quickly. There may be more going on, and we’ll say if you need a builder or plumber.
What your bath or shower is made of matters
Shower trays
We put weight on a tray before sealing it, so the joint is at its widest.
Baths
We fill the bath before sealing, to open the joint fully.
Also in Milwich
Work for landlords and builders
We regularly work with letting and managing agents. Send the address, pictures and access details.
Hotels, guest houses and holiday lets can’t afford rooms out of action for long, so we keep visits short and tidy. We’ll fit around changeovers where we can.
Prices and what affects them
We charge the same across the UK, including Milwich. The price reflects:
- What the surface is made of
- Doing more than one item at once
- The type of damage
- How easy the damage is to reach
Every job is a little different, so we price each one individually. The size and type of damage, the material and access all play a part, and doing several things on one visit costs less than separate visits.
Send photos for a quote
Phone photos are fine. Just ensure we can see:
- Any earlier repairs or coatings
- A clear, close picture of the problem area
- Your postcode, so we can check dates
- Daylight if possible, and no flash reflection
A quote takes minutes to ask for: take one close-up and one wider shot of the bath or shower, include your postcode and send them to us. You’ll get a fixed price, not an estimate.
DIY repairs versus a professional job
What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.
If you’ve already tried a DIY fix, that is fine. We take the old repair out and do it properly, so it won’t stop us repairing it. It does add a little time, so tell us about it when you send pictures.
How it works
A typical visit goes like this: we arrive at the agreed slot, protect everything around the work area, carry out the work and tidy away. Plan for around two hours from start to finish. Before we go, we will explain when it can be used and how to care for it.
- The old silicone is cut out completely.
- Residue is removed and the joint cleaned.
- We treat mould and dry the joint thoroughly.
- The bath is filled with water, or weight put on the tray.
- We apply fresh mould-resistant silicone and tool a neat bead.
Preparing for the visit
- Move bottles, mats and clutter away from the area
- Let the surface dry out before the visit
- Mention if the room is upstairs or in a flat
Get a quote
Pricing is simple: snap the damage close up and then the entire item, send them to us with your postcode, and you will get a fixed price back. There is no charge for the quote and you are under no obligation.
Advice
Do you need bath resealing in Milwich?
Most reseals are because of black mould. It grows into the silicone, so cleaning can’t get it all out.
Clients normally contact us about:
- Black mould in the sealant
- Old sealant that looks dirty
- Silicone smeared on tiles
- Missing sealant behind the taps
What to look for in a quote
- Whether cleaning and preparation are in the price
- How soon you can use it again
- Aftercare advice
- A fixed quote, and whether VAT is included
Why it’s worth resealing in Milwich
Resealing is routine maintenance. Leaving split or mouldy sealant lets water get behind the bath or tray, and that damage costs much more to fix. A repair is priced on what needs doing, not where you live. You will see the full price before you book.
What you get with us
- We leave the room as we found it
- CHAS, Constructionline and SafeContractor accredited
- Most jobs done in one visit
- No extra charge for your area
Take a look at our full price list.
About our accreditations · Every repair comes with a one-year guarantee.
