Hampshire · England
Bath Resealing in Minley
Fixed-price bath resealing in Minley and the surrounding area, done in a single visit in most cases.
- Black spots in the silicone
- Water getting behind the bath or tray
- Gaps by the taps
How we handle bath resealing in Minley
All of the old sealant is cut out, deal with any mould, and apply fresh mould-resistant silicone. We do this for baths, showers, sinks and worktops, including the awkward bits behind the taps. Common call-outs are for stained silicone and sealant that’s split or lifting, on kitchen worktops & sinks, shower trays & enclosures and wet rooms.
We stand behind the work with a one-year guarantee, so you are covered after the visit.
- Area
- Minley (GU17)
- Area hub
- Hampshire
- Cover
- A year, on every repair
- Price
- Free and fixed, from your pictures
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
Where we work around Minley
Minley is about 2 miles south of Yateley, in Hampshire. We travel to homes and businesses in Minley, so you do not need to take anything anywhere. We cover all 683 towns and villages in Hampshire, from the larger towns to small villages. Our jobs stretch from Minley to London (34 miles away).
Our visits in GU17 are booked in the same way as anywhere else. Nearby, we also work in Darby Green (1 mile north-east), Yateley (2 miles north), Little Sandhurst (3 miles north), Eversley Cross (3 miles north-west) and Hartfordbridge (3 miles west). Larger places within reach include Basingstoke (13 miles west), Farnborough (3 miles south-east), Fleet (3 miles south), Aldershot (5 miles south-east), Alton (13 miles south-west) and Tadley (14 miles west).
Around Minley
Around Minley, we work in homes near Church of St Andrew, Frogmore Community College and Ancells Farm Park, among other places. The closest station to Minley is Fleet station, about 1.9 miles south of the centre. Further afield, we also cover the area around Staff College Museum (3.5 miles north-east) and Fleet Community Hospital (2.4 miles south-west). The countryside around Minley includes Horseshoe Lake and Ancells Farm Nature Reserve.
What we’re called out for in Minley
Sealant splits when the bath or tray moves, often because it was sealed with the bath empty.
These are the problems we are asked about most:
- Black mould in the sealant
- Discoloured, yellow sealant
- Damp near the bath
- Missing sealant behind the taps
What your quote should include
- The length of the guarantee and what it covers
- Whether they match the colour on site
- How to care for the finish
- How the room is protected while they work
Landlords, agents and businesses in Minley
For developers and builders, we fix damage before handover, saving last-minute replacements. We can visit several plots in one trip.
Rental properties take more wear, and replacing things at every changeover adds up. Repairing between tenants keeps the property presentable for less.
How we price bath resealing
We don’t charge extra for travel to Minley. The price comes down to:
- Previous DIY repairs that have to come out
- How much damage there is
- The material
- Whether it’s a chip, crack, burn or wear
Rather than charging by the hour, we fix the price before we start. Damage, material and access decide it.
Getting a price from photos
Good photos mean an accurate price. Here’s what we find most useful:
- The material, if you know it
- Good light, ideally daylight, without flash glare
- A close-up of the damage, in focus
- Whether it’s been repaired or coated before
You don’t need a survey visit. Nearly every job can be priced from photos: send a close-up, a wider shot and your postcode, and we will come back to you with a fixed figure.
What we do, step by step
Expect a friendly, tidy visit. We confirm the time with you beforehand, protect the area, and get on with the job, which generally takes around two hours. If anything looks different from your photos, we’ll talk to you before going ahead.
- We protect the area and mask the joint lines.
- Old sealant and residue are removed.
- We clean, treat and dry the joint.
- We run a continuous bead of new silicone.
- The bead is smoothed, the tape removed and the seal left to cure.
How to prepare
- Avoid using the area for a few hours before we arrive
- Let us know if it has been repaired before
- Have somewhere for us to park nearby if possible
Getting a price
A quote takes minutes to ask for: take one close-up and one wider shot of the bath or shower, include your postcode and send them over. What comes back is a fixed price, not a guess.
Advice
DIY repairs versus a professional job
It’s tempting to reach for a kit, but the repairs we redo most often are DIY ones that have discoloured or lifted. Doing it properly first is usually the cheaper route.
It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.
Common questions in Minley
Will it make a mess?
No. The work area is masked and covered, and we leave the room clean.
What areas do you cover?
We cover the entire UK, including Minley and the rest of Hampshire. Just include your postcode and we will offer you dates.
Will the price change on the day?
Your quote covers the damage in the photos. Anything extra is discussed before we begin.
How much does bath resealing cost in Minley?
Every job gets a fixed price from your pictures. Send a close-up and a picture of the whole item with your GU17 postcode.
Do you do work for letting agents?
Yes, often. We can quote for several properties together and work between tenancies.
It’s been repaired before. Can you still fix it?
Yes, regularly. It can add a little time, which we include in the quote.
Are you a vetted contractor?
Yes, including CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
Why does the silicone keep cracking?
Normally because the bath or tray moves. We fill the bath before sealing it.
Is resealing worth it?
Putting new silicone over old doesn’t last. It soon peels, and mould stays trapped behind it. A proper reseal removes the old first. Compared with replacing, repairing usually costs far less, because nothing has to be taken out, refitted or made good. The quote lists exactly what you’re paying for.
Why book with us
- One-year guarantee on every repair
- One visit for most repairs
- CHAS, Constructionline and SafeContractor accredited
- Honest advice, even when it means no job
Take a look at our full price list.
When we would advise against a repair
We’d rather lose a job than do one that won’t last, so these are the limits:
- Gaps too big for silicone alone
- Loose tiles, which need refixing first
- Movement in the bath or tray
Send us photos and we’ll tell you honestly before booking.
What we work on
- Basins & vanity units
- Kitchen worktops & sinks
- Shower trays & enclosures
- Wet rooms
- Baths
Towns and villages near Minley
Also in Minley
Different materials, different repairs
Shower trays
Trays are sealed with weight on them, so the joint is at its widest.
Baths
We fill the bath before sealing, so the joint is at its widest.
About our accreditations · Every repair comes with a one-year guarantee.
